尾气加热式水暖系统在城市客车上的应展

简述了城市客车尾气加热式水暖系统的特点、工作原理，提出在设计过程中的注意事项。     

The design of bus route systems — An interactive location-allocation approach

An interactive modelling approach is developed to solve the practical problem of bus route network design. Possible bus routes are identified with facilities which can be located. Zones or pairs of zones in the urban area are identified with customers who will be allocated to the established facilities. It is shown that the classical Set Covering Problem is useful under the assumption of fixed demand; the Simple Plant Location Problem is effective under the assumption of demand which is sensitive to the level of bus service provided.     

基于CCP协议的HEV用ECU标定系统设计

CCP协议是基于CAN总线通信方式的车用ECU标定协议，具有通信可靠、传输速度快、通用性好等优点。在实时内核环境下设计了一套基于CCP协议的标定系统，并使用该系统实现了对混合动力电动汽车(HEV)动力系统中多个ECU同时标定的工作。     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

提高电动公交车经济性的营运方式与技术方案

在分析比较电动公交车两种营运方式的电费、电池折旧费后,指出目前国内正在试运行的电动公交车的营运方式并不经济。提出了电动公交车采用自动集电器的技术方案,一方面能实现大幅度延长电池寿命的“浅充浅放”的营运方式,另一方面可以省去占地较大的专用充电站,显著降低电动公交车营运项目投资额。     

路侧公交专用车道模式下右转交织长度建模

在设置路侧公交专用道的交叉口处,可通过划定交织区的方式允许右转车辆借用一定长度的公交专用道通行.合理规划公交车与右转车的交织区长度有利于提高借道右转的通行效率,减少在交织区前的排队车辆数从而降低道路混乱程度,保障公交车的专用路权.本文分析了公交站点影响下的公交车车头时距分布,建立了右转车穿越交织区长度计算模型,并结合实际调查数据进行了算例分析和模型验证.研究成果可为公交优先条件下的交叉口空间优化设计提供理论参考.     

基于特征子序列修正的公交刷卡滞后时间推算

针对一票制公共交通IC卡刷卡系统存在的滞后时间问题,提出基于特征子序列修正的时差匹配推算方法。依托GPS车辆到站信息序列和刷卡聚类序列,分析首末站和中途站站间运行时间分布的差异化特征,分别从两序列中提取大时间差和连续小时间差等特征子序列;利用两种子序列间一对一或一对多的对应关系分别进行初步搜索和二次修正,兼顾匹配过程的效率和精度。将推算流程应用于山西省大同市公共汽车系统,结果显示,抽样车辆的刷卡匹配率均达到99%以上,并且针对不同类型的公共汽车线路具有较强的适应性。     

客车风窗玻璃自爆问题分析及控制方案

针对客车在营运过程中风窗玻璃自爆的现象,分析客车风窗玻璃自爆的内、外因素,指出了降低出现自爆频率的控制方案．     

电涡流缓速器对周边零部件的热害影响

通过试验数据分析大客车电涡流缓速器在工作时产生的高温对周边零部件、管路、线路正常工作的影响,并提出防范电涡流热害的相应措施。     

轮胎气压检测系统在客车中的应用

介绍轮胎气压检测系统的结构及工作原理,以及轮胎在客车使用中的相关问题。