200km/h六轴大功率客运交流传动电力机车概述

介绍了200 km/h六轴大功率客运交流传动电力机车的主要技术特点、性能参数、总体结构,以及通风系统、电气系统、机械系统、制动系统等子系统的技术方案。     

主变压器差动保护装置极性问题的探讨

阐述牵引变电所三相V/v接线牵引变压器差动保护极性的影响因素及其校验方法（微机保护的极性、主变压器的极性和电流互感器的极性3方面）,分析了包西线某牵引变电所主变压器设计和接线的缺陷,提出并验证了三相V/v接线牵引变压器差动保护接线方式的正确性。     

利用钢轮托车辅助盾构机过站施工技术

针对地铁盾构法施工中盾构机通过满足过站要求的已完工车站进行二次始发这一常见施工环节,介绍一种通过钢轮托车辅助盾构机空载推进实现过站需要的施工技术及相应施工要点,如盾构机过站的施工工艺流程,钢板、钢轮拖车及轨道的铺设等。论述了利用钢轮拖车辅助盾构机过站施工技术采取的质量控制、安全措施及环保措施,分析了采用该技术的经济、社会和环境效益。     

轮轨力测量在高速铁路轨道检测中的应用研究

随着世界高速铁路的快速发展,高速铁路轨道检测技术已突破传统的轨道几何检测,朝着综合检测的方向发展。结合安装在我国新一代高速综合检测列车CRH380B-002的轮轨力检测系统在高速铁路轨道检测中的实际应用情况,介绍了我国在高速铁路轨道综合检测领域的最新研究进展———基于轮轨力测量的高速铁路轨道检测技术,并提出了一种基于轮轨力测量的高速铁路轨道状态评判方法。基于轮轨力测量的轨道检测技术通过安装在固定车辆(一般为轨道检查车)的连续测量测力轮对测量轮轨之间的相互作用力,从对车辆运行安全性和轨道疲劳寿命影响的角度对轨道状态进行检测,指导轨道日常养护。该技术是高速铁路轨道综合检测的重要组成部分,是对传统轨道几何检测的有效补充和完善,它的投入运用将更好的保障高速铁路的安全运营。     

变频器输出电压du/dt对电机的影响及其滤波器的设计

研究了变频器输出电压du/dt对电机端电压和轴承电流的影响,在PSpice中建立了电机高频模型,并对端电压波形进行了仿真;着重研究了一种du/dt滤波器的参数设计方法,并且进行了仿真和实验验证。实践证明,该滤波器具有较好的滤波效果。     

CARD/1系统在互通立交设计绘图上的应用与开发

通过对CARD/1系统在T型（Y型）互通式立体交叉设计绘图上的二次开发，使T型（Y型）互通式立体交叉的设计绘图达到一体化。     

柔性桩与土相互作用非线性分析的增量传递矩阵法

对桩侧土采用非线性荷载传递函数,对桩端土采用线性荷载传递函数,同时考虑桩周土所分担的荷载对单桩荷载传递规律的影响,利用增量荷载传递矩阵法及微分方程的近似解法--子域法,推出了刚性承台下柔性桩与地基非线性相互作用的近似解析算式。为了验证该方法的可行性,通过试验将试验结果与有限元结果及该方法所得结果进行了对比,对比表明:该理论解与现场实测值、有限元计算值都非常接近。     

Wheel-rail contact models for vehicle system dynamics including multi-point contact

Advanced modelling of rail vehicle dynamics requires realistic solutions of contact problems for wheels and rails that are able to describe contact singularities, encountered for wheels and rails. The basic singularities demonstrate themselves as double and multiple contact patches. The solutions of the contact problems have to be known practically in each step of the numerical integration of the differential equations of the model. The existing fast, approximate methods of solution to achieve this goal have been outlined. One way to do this is to replace a multi-point contact by a set of ellipses. The other methods are based on so-called virtual penetration. They allow calculating the non-elliptical, multiple contact patches and creep forces online, during integration of the model. This allows nearly real-time simulations. The methods are valid and applicable for so-called quasi-Hertzian cases, when the contact conditions do not deviate much from the assumptions of the Hertz theory. It is believed that it is worthwhile to use them in other cases too.     

Simulation on progressive collapse behaviour of whole ship model under extreme waves using idealized structural unit method

To ensure the safety of navigating ship, working loads and structural load-carrying capacity are two important aspects. In the present paper, a total simulation system combing load calculation and structural collapse analysis is applied to simulate progressive collapse behaviour of a single-hull Kamsarmax type bulk carrier. A three dimensional singularity distribution method is adopted to calculate pressure distribution with time history. A mixed structural model, collapse part simulated by ISUM elements and remaining part by elastic FEM elements with relative coarse mesh, is proposed for collapse analysis. Progressive collapse behaviour obtained by ISUM is good agreement with that by nonlinear software package, MARC. However, the calculation time of ISUM analysis is about 1/70 of MARC analysis. The applicability to structure system, high accuracy and sufficient efficiency of ISUM had been demonstrated.     

信号培训系统的虚实互动机制研究

从信号培训系统目前存在的问题出发,提出一种虚实互动的机制来构建信号培训系统的方法。研究结果表明,本方法可以针对目前信号培训的特点,建立能够适应不同线路环境,满足不同实物设备组成方式和实训实操要求的信号培训系统。