更高速度条件下铁路简支箱梁关键参数研究

针对梁体基频、竖向刚度等参数,概述我国高速铁路桥梁参数的研究思路及成果、参数设计及运营现状,采用车桥竖向相互作用程序分析铁路简支箱梁动力响应规律。结果表明,梁体基频为设计参数的控制因素,梁体实测梁体基频高于设计值和规范限值,梁体刚度存在一定的储备;时速350 km的高速铁路简支箱梁可适应更高速度420 km/h的运营要求;420 km/h速度等级高速铁路简支箱梁关键参数可参考350 km/h速度等级相关参数;40 m跨度车桥动力响应明显降低,梁体基频等动力参数不再控制梁体设计,建议开展高速铁路更大跨度简支箱梁应用研究。     

转炉煤气中O_2气体分析系统设计

通过分析煤气回收工艺,介绍了炼钢厂转炉煤气中O2气体分析系统,包括取样单元、样品传输单元、样品预处理单元、分析单元。O2气体分析系统安装在气化装置的现场,设置了现场分析防护室,为其提供良好的运行环境和特殊的防护,以确保实时、准确地检测出转炉煤气中O2的含量。     

From Twitter to detector: Real-time traffic incident detection using social media data

The effectiveness of traditional incident detection is often limited by sparse sensor coverage, and reporting incidents to emergency response systems is labor-intensive. We propose to mine tweet texts to extract incident information on both highways and arterials as an efficient and cost-effective alternative to existing data sources. This paper presents a methodology to crawl, process and filter tweets that are accessible by the public for free. Tweets are acquired from Twitter using the REST API in real time. The process of adaptive data acquisition establishes a dictionary of important keywords and their combinations that can imply traffic incidents (TI). A tweet is then mapped into a high dimensional binary vector in a feature space formed by the dictionary, and classified into either TI related or not. All the TI tweets are then geocoded to determine their locations, and further classified into one of the five incident categories.We apply the methodology in two regions, the Pittsburgh and Philadelphia Metropolitan Areas. Overall, mining tweets holds great potentials to complement existing traffic incident data in a very cheap way. A small sample of tweets acquired from the Twitter API cover most of the incidents reported in the existing data set, and additional incidents can be identified through analyzing tweets text. Twitter also provides ample additional information with a reasonable coverage on arterials. A tweet that is related to TI and geocodable accounts for approximately 5% of all the acquired tweets. Of those geocodable TI tweets, 60–70% are posted by influential users (IU), namely public Twitter accounts mostly owned by public agencies and media, while the rest is contributed by individual users. There is more incident information provided by Twitter on weekends than on weekdays. Within the same day, both individuals and IUs tend to report incidents more frequently during the day time than at night, especially during traffic peak hours. Individual tweets are more likely to report incidents near the center of a city, and the volume of information significantly decays outwards from the center.     

Gas transfer velocities of CO2 and CH4 in a tropical reservoir and its river downstream

We have measured simultaneously the methane (CH₄) and carbon dioxide (CO₂) surface concentrations and water–air fluxes by floating chambers (FC) in the Petit-Saut Reservoir (French Guiana) and its tidal river (Sinnamary River) downstream of the dam, during the two field experiments in wet (May 2003) and dry season (December 2003). The eddy covariance (EC) technique was also used for CO₂ fluxes on the lake. The comparison of fluxes obtained by FC and EC showed little discrepancies mainly due to differences in measurements durations which resulted in different average wind speeds. When comparing the gas transfer velocity (k₆₀₀) for a given wind speed, both methods gave similar results. On the lake and excluding rainy events, we obtained an exponential relationship between k₆₀₀ and U₁₀, with a significant intercept at 1.7 cm h^− 1, probably due to thermal effects. Gas transfer velocity was also positively related to rainfall rates reaching 26.5 cm h⁻¹ for a rainfall rate of 36 mm h^− 1. During a 24-h experiment in dry season, rainfall accounted for as much as 25% of the k₆₀₀. In the river downstream of the dam, k₆₀₀ values were 3 to 4 times higher than on the lake, and followed a linear relationship with U₁₀.     

Comparison of HC species from diesel combustion modes and characterization of a heat-up doc formulation

This study summarizes engine speed and load effects on HC species emissions from premixed charge compression ignition (PCI) and conventional diesel combustion, and it evaluates diesel oxidation catalyst (DOC) formulations on a gas flow reactor for the purpose of diesel particulate filter regeneration or lean NO_x trap desulfation. HC emissions are sampled simultaneously by a Tedlar bag for light HC species and by a Tenax TA™ adsorption trap for semi-volatile HC species, and they are analyzed by gas chromatography with a flame ionization detector. The bulk temperature and residence time during combustion are key parameters that are important for understanding the effects of speed and load on engine-out HC emissions. The degree of post-flame oxidation is higher in PCI than in conventional combustion, and it is increased for PCI with a higher speed and load, as indicated by a lower fuel alkanes/THC ratio, a higher alkenes/fuel alkanes ratio, and a higher methane/THC ratio. Ethene and n-undecane are two representative HC species, and they are used as a surrogate mixture in the gas flow reactor to simulate PCI and conventional combustion with in-cylinder post fuel injection. Among the three DOC formulations tested, the catalyst with constituent precious metals of platinum and palladium (PtPd) showed the best light-off performance, followed by PtPd with an addition of cerium dioxide (PtPd+CeO₂), and platinum (Pt), regardless of exhaust compositions. Conventional combustion exhaust composition shows a lower light-off temperature than that of PCI, regardless of catalyst formulation.     

Automotive structure vibration with component mode synthesis on a multi-level

The recursive component mode synthesis method (RCMS) has been implemented for the finite element analysis model of an automobile structure as an efficient free vibration analysis tool. The RCMS method is intended to obtain a better performance relative to the block Lanczos method, which is a traditional method in the industry of obtaining eigenvalues, while obtaining the acceptable accuracy. A numerical example of the automobile finite element model demonstrates the outstanding performance of RCMS compared to the block Lanczos method.     

三维编织复合材料板的自由振动

基于Reddy高阶剪切变形板理论,用双重Fourier级数法求得了四边简支的三维四向编织复合材料剪切板自由振动的解析解,并讨论了纤维的体积含量和编织角对剪切板固有频率的影响。     

燃气热泵的经济性分析

利用热经济学的研究方法对燃气热泵和其它几种常规空调方式的经济性进行了研究比较,并就能源价格变化对经济性的影响进行了研究,获得了适宜燃气热泵推广应用的能源价格范围。结果表明,燃气热泵的年度总成本最低,具有经济性优势。     

高纯六氟化钨的分析方法综述

本文介绍了六氟化钨的性质、应用及目前的发展状况,针对六氟化钨区别于其它电子气体的特殊性质,综述了对其中所含气体杂质和金属粒子的分析方法。六氟化钨中的气体杂质主要包括:四氟化碳、四氟化硅、二氧化碳、六氟化硫、氧气、氮气和一氧化碳,采用加反吹系统的气相色谱法进行分析;氟化氢杂质用傅立叶红外光谱进行分析;六氟化钨中的金属粒子主要有钙、钾、铁、铜和铬等,可以采用原子发射光谱法、原子吸收光谱法和电感耦合等离子质谱法进行测定。     

液化天然气（LNG）拖头在盐田国际码头的应用

为建设绿色港口,进一步节能减排,盐田国际集装箱码头使用液化天然气（LNG）拖头。从技术成熟性、设备的市场供应情况以及安全和成本等几方面综合考虑,制定选用LNG集装箱拖头替代传统的柴油拖头的方案。详细介绍实施这一方案的方法。盐田国际（YICT）是全国第一个采用LNG拖头的码头公司。取得显著成效,可供借鉴。