水平地震作用下单桩横向非线性动力响应的三维有限元数值模拟

针对水平地震作用下的桩土相互作用体系,利用有限元软件ANSYS建立了单桩-地基土系统三维有限元模型。运用此模型,对系统进行考虑地基土的材料非线性和桩土界面状态非线性的单桩横向地震响应计算,并进行了自由场响应的计算。计算结果表明:土体的材料非线性与桩土界面状态的非线性特性对单桩的横向水平地震响应有着一定的影响。     

现场总线技术在汽车检测线上的应用

随着汽车工业的发展,提高检测数据传输的实时性和可靠性成为汽车检测技术的主要特点.本文简要对现场总线进行了介绍,并以PHILIPS公司生产的CAN总线控制器SJA1000作为汽车检测线各单元的核心控制器,研究CAN总线技术在汽车检测线上的具体应用.实践表明,现场总线技术的应用不仅在设计、安装、调试、运行到维护等方面节省了开支,而且提高了数据采集系统的性能及检测的速度,使得系统具有实时性、开放性和可扩展性.     

钢波纹管涵洞力学性能现场试验研究

柔性、高强度的钢波纹管涵洞,不仅具有优良的适应地基与基础变形的能力,而且具有自重轻、运输方便、施工简单且施工工期短、造价低、对地基扰动小、对基础要求较低等优点,还具较强的抗拉、抗剪和抗疲劳能力,故其具有较为广泛的应用前景。文章通过对钢波纹管涵洞进行野外现场测试,从不同的角度研究了其力学特征,结果表明:钢波纹管涵洞的管顶、管侧沿着波形(断面)方向呈现出不同的应力应变变化趋势,波峰和波谷处以及内侧和外侧、切向和轴向的应力应变呈现出管顶与管侧相反的拉压变化规律。     

基于计算机视觉的驾驶员转向操作实时监测研究

为实时监控驾驶员操纵转向盘的状态，构建了基于机器视觉汽车转向盘实时监控系统，并运用阈值分割和边缘检测方法对转向盘图像中感兴趣区域进行了图像分割，提出了转向盘转角的计算公式。试验结果表明，感兴趣区域图像分割与转向盘转角监测方法有效。     

工程机械组群动态组织与集成管理系统研究

阐述了工程机械组群动态组织与集成管理系统的组成，特点和发展趋势，分析了系统的技术关键发及技术性能，确定了系统的构成方案，详细探讨了各功能单元的结合关系以及系统的社会，经济效益。     

分布式工业进程参数监测系统实时多任务软件的设计

作者从操作系统的观点出发,分析分布式工业过程参数监测系统实时多任务软件的方法,解决了在DOS环境下,支持多任务问题。     

Transient responses of a VLFS during landing and take-off of an airplane

The transient elastic deformation of a pontoon-type very large floating structure (VLFS) caused by the landing and take-off of an airplane is computed by the time-domain mode-expansion method. The memory effects in hydrodynamic forces are taken into account, and great care is paid to numerical accuracy in evaluating all the coefficients appearing in the simultaneous differential equations for the elastic motion of a VLFS. The time-histories of the imparted force and the position and velocity of an airplane during landing and take-off are modeled with data from a Boeing 747-400 jumbo jet. Simulation results are shown of 3-D structural waves on a VLFS and the associated unsteady drag force on an airplane, which is of engineering importance, particularly during take-off. The results for landing show that the airplane moves faster than the structural waves generated in the early stage, and the waves overtake the airplane as its speed decreases to zero. The results for take-off are essentially the same as those for landing, except that the structural waves develop slowly in the early stage, and no obstacle exists on the runway after the take-off of airplane. The additional drag force on an airplane due to the elastic responses of the runway considered in this work was found to be small in magnitude.     

Calculation of Transient Stress Field During Laser Transformation Hardening Process

IntroductionHighpowerCOzlaserssdsetransformationhardeningtechniquehasbeensuccessfullyusedinindusnyforWYears.BecausethetemPeratUrefleldislocalizedinmaterialdurllglasertransfonnationhMngProcess,highthermstrCsswillgenerateinmatgrialduringlasertfansformationhardeningProcess.Therisalsohighresidualstressinmaterial,bothintCnsionandcomPression['-'].ComPressresidualstressishelptoincreasethefatigueldrimeofthelasertreatedmaterial,butthetensilestresswillshortenthefatiguelifetmeofthelasertreatedmator…     

Analysis on Ground Surface Deformation and Influence of Construction Parameters Caused by Two Different Shield Machines in Double-tube Tunnelling北大核心CSCD

Based on a shield-driven running tunnel project of Hangzhou Metro Line 2, this paper carries out field measuring of the ground surface deformation caused by two different shield machines in double-tube tunnelling in soft soil areas, obtains the laws of the surface deformation caused by shield-driven double-tube tunnelling and verifies the applicability of the modified Peck formula to double-tube tunnelling. The results show that in soft soil areas the impacts on ground surface deformation caused by different shield construction parameters in the previously and subsequently excavated tunnels are different, while the surface deformation changes sharply before and after the shield machine passing through the cutting face, and a rebound phenomenon occurs when the shield tail passes through the cutting face due to the influence of the grouting; The cutterhead torque of the shield machine in soft soil areas can be composed of five calculation factors, and the calculation results are in good agreement with the measured values. The larger the opening rate of the shield cutterhead is, the larger the average torque value will be, the higher the percentage of large ground loss rate will be, and the larger the maximum ground surface settlement will be; The ratio of cutterhead torque T to mucking volume per ring Q is used as the control parameter for analyzing the ground surface settlement, and a certain positive correlation between the ratio and the surface settlement value is determined, the smaller the cutterhead opening rate is, the more accurate the fitting results will be. © 2022, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Efficient multiple model particle filtering for joint traffic state estimation and incident detection

This article proposes an efficient multiple model particle filter (EMMPF) to solve the problems of traffic state estimation and incident detection, which requires significantly less computation time compared to existing multiple model nonlinear filters. To incorporate the on ramps and off ramps on the highway, junction solvers for a traffic flow model with incident dynamics are developed. The effectiveness of the proposed EMMPF is assessed using a benchmark hybrid state estimation problem, and using synthetic traffic data generated by a micro-simulation software. Then, the traffic estimation framework is implemented using field data collected on Interstate 880 in California. The results show the EMMPF is capable of estimating the traffic state and detecting incidents and requires an order of magnitude less computation time compared to existing algorithms, especially when the hybrid system has a large number of rare models.