九曲河大桥加固工程施工监控技术研究

桥梁施工监控在桥梁建设及加固改造工程中是必不可少的一部分,监控可以对桥梁线形及内力、挠度情况进行实时反馈,严格把关,保证与设计一致。文章以九曲河大桥加固工程为背景,结合加固改造设计方案,从线形控制、变形监测与应力监测等方面阐述了施工监控技术及效果。     

多孔管孔出流速度和流量影响因素数值仿真及试验

本文通过控制变量法进行工况设计,对多孔管进行数值模拟和试验对比,分别研究多孔管管径、管长、孔径、孔间距、水压五个变量对多孔管孔出流速及流量的影响。使用ANSYS软件中的DesignModeler模块进行几何建模,ICEM中的O-Block技术进行流体计算域网格划分,Fluent软件进行求解。研究发现,多孔管管内径和管长的增加均使孔出流速和出流量减小,管长度的增加会影响孔出流沿程的均匀性;孔径的增大使孔出流速明显减小,且影响孔出流沿程的均匀分布,出流量受孔径的影响较复杂,在孔径不超过2.5mm时可以认为出流量与孔径的平方成正比;孔间距的增大对孔出流速和沿程均匀分布基本无影响,而与出流量成正比。最后将数值模拟结果和试验进行对比,发现试验数据所反映的多孔管出流量与管内径、管长、孔径和孔间距的关系与数值模拟基本吻合,而试验中管的出流量普遍比数值模拟小。     

Biofuel futures in road transport – A modeling analysis for Sweden

First and second generation biofuels are among few low-carbon alternatives for road transport that currently are commercially available or in an early commercialization phase. They are thus potential options for meeting climate targets in the medium term. For the case of Sweden, we investigate cost-efficient use of biofuels in road transport under system-wide CO₂ reduction targets to 2050, and the effects of implementation of targets for an almost fossil-free road transport sector to 2030. We apply the bottom-up, optimization MARKAL_Sweden model, which covers the entire Swedish energy system including the transport sector. For CO₂ reductions of 80% to 2050 in the Swedish energy system as a whole, the results of the main scenario show an annual growth rate for road transport biofuels of about 6% from 2010 to 2050, with biofuels accounting for 78% of road transport final energy use in 2050. The preferred biofuel choices are methanol and biomethane. When introducing additional fossil fuel phase-out policies in road transport (−80% to 2030), a doubling of the growth rate to 2030 is required and system CO₂ abatement costs increases by 6% for the main scenario. Results imply that second generation biofuels, along with energy-efficient vehicle technologies such as plug-in hybrids, can be an important part of optimized system solutions meeting stringent medium-term climate targets.     

不同雷诺数下车辆队列尾车发动机舱盖气动特性研究

数值仿真与模型风洞试验相结合研究了典型工况下两车队列中尾车发动机舱盖气动特性和两车间隔区域的流场,对比了缩比模型和实车模型对应雷诺数下车辆队列的流动形态。缩比模型仿真结果与风洞试验结果一致表明采用数值方法的可行。对比不同雷诺数下车辆队列气动特性发现,缩比模型与实车模型发动机舱盖表面平均静压分布基本相同,但在纵向对称面上,实车模型的前车尾迹比缩比模型更加上扬,底部区域气流速度更高。非定常条件下,实车模型前车尾涡相对尺度明显小于缩比模型,且扩散得更充分,尾迹区涡的分布状态更加混沌,发动机舱盖表面脉动能量的分布更加混乱。涡在两车间隔区域的运动并非简单的移动,而是一个由涡破裂、涡配对和涡融合构成的复杂过程。     

预应力混凝土槽形梁静力行为研究

为了解槽形梁静力行为,进行了一片预制预应力混凝土槽形梁的模型试验,分别考虑跨中最大弯矩及梁端最大剪力两种荷载工况对试验模型进行加载,测试了试验模型的控制断面的应力、变形.并采用非线性有限元分析方法对槽形梁的力学特性进行了研究.试验和研究得到了如下结论:该槽形梁的剪力滞效应较为突出,具有明显的开口薄壁杆件特征,底板的空间板效应明显,在设计荷载作用下结构处于线弹性状态,具有一定的安全储备.     

《大学生创业基础》示范课程建设实践与探索

大学生创业教育已成为目前各高校面临的新课题.文章结合广西交通职业技术学院教学实践,以《大学生创业基础》示范课程的建设为突破口,提出了创业教育示范课程建设的思路与设想,探讨了专业教育与创业教育相匹配的方法,并评述了该示范课程建设的效果.     

Model-based predictive control for bicycling in urban intersections

In this paper, a model predictive control approach for improving the efficiency of bicycling as part of intermodal transportation systems is proposed. Considering a dedicated bicycle lanes infrastructure, the focus in this paper is to optimize the dynamic interaction between bicycles and vehicles at the multimodal urban traffic intersections. In the proposed approach, a dynamic model for the flows, queues, and number of both vehicles and bicycles is explicitly incorporated in the controller. For obtaining a good trade-off between the total time spent by the cyclists and by the drivers, a Pareto analysis is proposed to adjust the objective function of the MPC controller. Simulation results for a two-intersections urban traffic network are presented and the controller is analyzed considering different methods of including in the MPC controller the inflow demands of both vehicles and bicycles.     

车桥系统气动特性的节段模型风洞试验研究

侧向风作用下的车桥耦合振动分析需要考虑相互气动影响的车辆和桥梁各自的气动参数。为考虑车辆和桥梁的相互气动影响,在常规桥梁节段模型三分力测试装置的基础上研制了一种三分力分离装置———交叉滑槽系统。该系统利用环形滑槽和直线滑槽交叉点位置的变化来调整车辆和桥梁间的相对几何关系,并能实现车桥系统的同轴转动,从而方便地进行不同攻角情况下气动力的测试。利用交叉滑槽系统通过节段模型风洞试验对车桥系统的气动特性进行了多工况对比研究,讨论了车桥系统的雷诺数效应,分析了车桥间的相互气动作用,比较了车辆在桥上位置的影响。试验结果表明,基于交叉滑槽系统的节段模型风洞试验测试是可行的;车桥间的相互气动作用对车辆和桥梁的气动力有较明显的影响。