Optimal joint distance and time toll for cordon-based congestion pricing

This paper addresses the optimal toll design problem for the cordon-based congestion pricing scheme, where both a time-toll and a nonlinear distance-toll (i.e., joint distance and time toll) are levied for each network user’s trip in a pricing cordon. The users’ route choice behaviour is assumed to follow the Logit-based stochastic user equilibrium (SUE). We first propose a link-based convex programming model for the Logit-based SUE problem with a joint distance and time toll pattern. A mathematical program with equilibrium constraints (MPEC) is developed to formulate the optimal joint distance and time toll design problem. The developed MPEC model is equivalently transformed into a semi-infinite programming (SIP) model. A global optimization method named Incremental Constraint Method (ICM) is designed for solving the SIP model. Finally, two numerical examples are used to assess the proposed methodology.     

三边长后方交会在精密测量工程中的应用

文章以广西贵港西江航运建设二期工程船闸安全监测项目为例,介绍了三边长后方交会法的基本原理,推导出三边长后方交会法的坐标计算、平差公式等,分析了其误差来源和控制措施,论证了三边长后方交会在精密测量工程中的可行性与优越性。     

Travel time estimation oriented freeway sensor placement problem considering sensor failure

Optimal sensor placement on freeway corridor is of great interest to transportation authorities. However, current traffic sensors are easily subject to various failures. Therefore, it is necessary to incorporate sensor failure into the optimal sensor placement model. In this article, a two-stage stochastic model is proposed for the purpose of travel time estimation on freeway corridor. To balance the effectiveness and reliability, a stochastic conditional value at risk (CVaR) model is also proposed. Since both models are too complicated, a customized genetic algorithm is developed. Numerical experiments show that considering sensor failure makes a significant performance improvement in the sensor placement pattern. Sensitivity analysis is also applied to investigate the impact of a number of allowable sensors and different traffic sensor failure probability.     

Flow Stress Model of Stainless Steel OCr13Ni5Mo at Elevated Temperature

For a more accurate forming calculation and numerical simulation of hydraulic turbine blade,experimental studies on the flow stress of stainless steel OCr13Ni5Mo were carried out upon Gleeble-1500 thermal simulator under different deformation conditions.The results then were analyzed and the effects of all influencing factors were summarized consequently.New mathematic models were conceived.Utilizing the software Matlab,regression coefficients were calculated by the least square method.The model has an eminent capability of curve-fitting performance with impact structure whose correlation coefficient is up to 0.908 0 and the cosine coefficient is 0.995 8.All mathematic models and process parameters can be used in engineering calculations or computer simulations.     

生存素在5-氟尿嘧啶诱导人绒癌细胞株JAR凋亡中的作用

目的探讨生存素(survivin)在化疗药物5-氟尿嘧啶(5-Fu)诱导的人绒癌细胞株(JAR)凋亡中的作用。方法用JAR细胞株进行培养传代,以不同浓度5-Fu作用于JAR细胞,MTT方法观察5-Fu对JAR细胞生长的抑制情况,流式细胞仪检测细胞凋亡率,用逆转录聚合酶链(RT-PCR)和免疫印迹技术(Western-blot)方法检测survivin基因和蛋白的表达。结果①5-Fu对JAR细胞的生长具有抑制作用,并有浓度和时间的依赖性;②5-Fu诱导JAR细胞凋亡,凋亡率随浓度而增加;③5-Fu作用后survivin基因和蛋白表达减少,随浓度增加而减少。结论5-Fu可能是通过降低survivin表达水平,诱导JAR细胞凋亡。     

5-羟色胺转运体基因多态性和抑郁症的发病、性别、严重程度及自杀行为的相关性

目的探讨中国汉族人群5-羟色胺转运体启动区(5-HTTLPR)基因多态性和抑郁症的发病、性别、严重程度及自杀是否相关。方法应用聚合酶链式反应(PCR)扩增技术测定150例抑郁症患者和150例正常对照者的5-HT-TLPR基因型和等位基因,分别验证各种基因型与中、重度抑郁症发病、性别及自杀行为的相关性。结果病例组SS、LS基因型及S等位基因频率均高于对照组(26.0% vs.20.0%;52.7% vs.46.0%;52.3% vs.43.0%;P均<0.05);两组性别分层比较,女性S等位基因频率高于对照组(55.3% vs.43.6%,P<0.05);病例组严重程度分层比较差异无统计学意义(P>0.05);病例组有无自杀行为分层比较,有自杀行为患者SS基因型频率(37.3% vs.20.2%)及S等位基因频率(61.8% vs.47.5%)均高于无自杀行为患者(P<0.05);抑郁自杀组性别分层比较未显示显著性差异(P>0.05);抑郁自杀组病情程度分层比较,重度抑郁自杀者SS基因型频率(42.5% vs.18.2%)及S等位基因频率(68.7% vs.36.4%)均高于中度抑郁自杀者(P<0.05)。结论在中国汉族人群中,5-HTTLPR多态性和抑郁症相关。S等位基因可能是抑郁症的易感基因,特别是女性,SS型可能是抑郁症易感基因型;S等位基因可能是抑郁症患者自杀的危险基因,SS基因型人群可能是抑郁症患者自杀的危险人群,特别是携带S等位基因的重度抑郁症患者更易自杀。     

基于斯特林发动机的第5代非核动力潜艇方案设计

对于使用斯特林发动机的第5代非核动力潜艇,研究了不同排水量下的潜艇设计方案,得到了水下最大航速、水下经济航速、水下低噪声航速、水下不间断续航力、斯特林发动机需求功率等主要技战术性能指标之间的关系,并对不同水下排水量的潜艇设计方案进行了比较。本文对于使用斯特林发动机用于第5代非核动力潜艇设计具有参考价值。     

浅谈滚动物料计划在汽车行业中的应用

随着汽车逐年普及,消费者需求多样化、个性化随着增长,而且消费者对提车周期要求越来越高.汽车生产企业如何快速、高效的占领市场,同时降低供应链物流成本,是目前自主品牌汽车企业面临重大挑战.需要从软硬件进行全面提升竞争能力,物料组织改进是整个汽车供应链改进不可缺少的一个重要环节,能帮助企业迅速占领市场,以最小的成本换取最大利...     

一甲和三甲歧化反应的研究-载体和反应工艺的选择

对一甲基三氯硅烷和三甲基氯硅烷歧化反应的载体和反应工艺进行了研究,结果得出使用NaAlCl4催化剂有较好的效果,其中ZSM-5载体最好.在鼓泡式反应工艺和蒸发式反应工艺中,后者较好.     

5G技术在铁路通信系统的应用

对于铁路行业来说,5G将是未来铁路移动通信系统(简称"FRMCS")的重中之重,是GSM-R(铁路移动通信全球系统)的继承者,也是ATO(列车自动驾驶)的推动者.