双悬臂梁桥试验检测及安全技术评价

双悬臂梁桥为我国在上世纪60年代至90年代期间为解决桥梁跨度不足而使用的一种结构。结构主要以锚固孔和挂梁孔组成。该种桥梁的病害主要体现在牛腿的受力薄弱位置的抗剪能力不足。该文对位于吉林省延边州G302国道上的嘎呀河大桥的试验检测过程作了介绍,以期为今后此类桥梁评定作为借鉴。     

阿拉山口口岸站货运安全问题的分析及对策

针对阿拉山口站货运作业中存在散堆装货物超载、成件小包装货物超载、集装箱偏载等问题,提出严格执行作业流程,约束和规范装载机械司机的操作行为,消除监控盲区,建立抽检制度、建立超偏载检测装置故障停用应急机制,建立装车前对货件标重检斤的制度,约束国外发货人的行为,保证货物装箱质量等保障货物运输安全的对策。     

基于知识积累的软件运行剖面生成方法及黑箱测试技术

软件的黑箱测试是一个面向用户的软件测试方法，当它以运行剖面为基础生成测试案例时，运行剖面的完备性将直接影响其测试结果的可信性，基于知识积累的软件运行剖面生成方法就是试图通过知识的获取和积累使生成的运行剖面日趋完备，从而达到黑箱测试技术在某些特殊的软件测试领域中更具实用和可信。文章讨论了软件 运行剖面的完备性和软件失效类等概念，提出了一种基于知识各界的软件运行剖面生成广阔圾黑箱测试技术，这种技术现已     

中小型车站Smart2.0系统的方案与安全性分析

作者介绍了适合中小型车站Smart 2.0系统的一种可行方案,通过对该系统安全性的分析,该方案具有结构简单、安全可靠、节约投资等特点。     

京津城际轨道交通防灾安全监控系统简析

本文重点介绍了京津客运专线防灾安全监控系统中的防风预警监测子系统、异物侵限监控子系统的设备组成及实现安全监测、控制列车运行的基本原理。     

基于CarSim自适应巡航控制建模与仿真

文章首先利用模糊法则建立能够反映驾驶员反应时间的隶属度函数,并根据制动过程理论建立安全距离模型,通过安全距离模型建立期望加速度模型。然后分别建立加速和制动模型,在此基础上制定控制模式转换策略,基于PID算法设计巡航控制器。最后在Matlab/Simulink和CarSim联合仿真环境中验证所设计的控制系统的有效性。     

The future of road safety: A worldwide perspective

Estimates by the World Health Organization suggest that, on a yearly basis, road crashes kill 1.25 million people—nearly 3400 road fatalities per day—and injure up to 50 million. Traffic injuries are not equally spread over the world, however; some countries are hit harder than others, and the chance of being killed in a road crash depends on where one lives. Almost 90% of all traffic casualties occur in low- and middle-income countries (LMIC). Globally, the number of fatalities per 100,000 population (mortality rate) ranges from less than 3 to almost 40. The rate is less than 9 in high-income countries (HIC) but averages around 20 in LMIC, with the African region demonstrating the highest rate (26.6). While road safety trends have been positive in HIC over the last few decades, trends in LMIC are not telling a positive story: road fatalities are expected to increase to almost 2 million road fatalities per year by 2020.The United Nations has adopted several resolutions on road safety and proposes actions to tackle the global road safety crisis. Considering the current level of road safety to be unacceptable, the UN has taken several initiatives. One effort, the Decade of Action for Road Safety 2011–2020, has generated substantial activity around the world over the last couple of years. Furthermore, it is very encouraging that the UN included road safety in the Sustainable Development Goals that it laid out in September 2015. Road safety is part of the public health agenda and the urban development agenda. Measured in “real actions,” however, the responses so far from the overall global community and individual countries do not suggest that we are already on the right track to bringing down the death toll on roads.The future of road safety is uncertain and definitely not the same for all regions of the world. Countries with a mature road safety approach and an ambition to make further progress are expected to move in the direction of a pro-active approach: a Safe System approach. It is reported that many LMIC, meanwhile, are on the brink of designing road safety strategies and implementing action plans. The international community is willing to support LMIC, but LMIC cannot simply copy successful HIC strategies because local circumstances differ. The principles of successful HIC strategies are applicable, but the priorities and action plans should take root in and align with local conditions.     

某车型多种正面碰撞安全性能性分析

实际生活中的正面碰撞事故往往形式复杂,因此,文章结合2018版C-NCAP和C-IASI两大规程中规定的工况以及生活中常见的正碰事故类型情况,通过仿真分析总结了某车型在四种正面碰撞工况下的安全性能,能够为全面研究汽车正面碰撞的安全性能提供参考借鉴。     

JYJXC-160/260继电器拉杆材料的选择和分析

新型有极加强接点继电器JYJXC-160/260具有比同类产品更高的使用寿命和可靠性.但其塑料拉杆为同类继电器中首次采用,为确保继电器的质量,对该零件从选材到设计及加工进行了深入的研究.结果表明,只要在生产过程中严格执行工艺,认真检验,拉杆的性能是可靠的.     

关于《水运工程测量质量检验标准》制定中有关问题的探讨和说明

为了加强水运工程测量质量控制、质量检验及质量管理,根据交通部水运工程建设标准体系的规划和《交通部水运工程建设标准管理办法》的要求,制定了《水运工程测量质量检验标准》。文中重点讨论了该标准与我国有关标准的相关性、测量质量评分方法、测量质量检验程序及测量质量检验标准中不列入监理内容的理由,并对测量质量权重的划分问题及制图质量的检验内容等作了说明。以期能够在该标准的制定过程中广泛征求意见和建议,使该标准更加合理和完善。