船舶轴舵系安装设备的虚拟设计与装配

以船舶轴舵系安装设备为例,使用SolidWorks软件设计建立轴舵系安装设备的三维实体模型,研究轴舵系安装设备的安装过程和安装工艺,并对轴舵系安装设备的干涉检查及装配约束进行仿真分析,以验证轴舵系安装设备在设计及安装工艺方面的准确性和适用性,对提高造船设备产品质量、降低产品设计误差、缩短生产周期、优化装配流程具有重要意义。     

Fatigue damage prediction of ship rudders under vortex-induced vibration using orthonormal modal FSI analysis

Recently, the fatigue failure of ship rudders owing to vortex-induced vibration has increased as commercial ships become faster and larger. However, previous methods are inappropriate for fatigue failure prevention owing to the lack of fluid–structure interaction considerations. This study aims to develop a fatigue damage prediction method that can be applied at the design stage to prevent fatigue failure of ship rudders under vortex-induced vibration. The developed prediction method employed the fluid–structure interaction (FSI) method to properly consider the fluid–structure interaction and implemented orthonormal mode shapes to reflect the complex geometry and boundary conditions of the ship rudders. For validation, vortex-induced vibration of the hydrofoil model was obtained using the developed method, and the prediction results matched well with the experimental results. Then, the fatigue damage of the ship rudder model under vortex-induced vibration was predicted using the developed method, and their characteristics are discussed. The stress distribution obtained using the developed method matched well with the geometrical characteristics of the ship rudders. The potential for fatigue failure due to the resonance of vortex-induced vibration was expected by comparing the stress distributions for various flow velocities to the S–N curves provided by the DNV classification.     

舵装置的优化设计

为使"渤船"第五代苏伊士船型具有良好的操纵性能,提高市场竞争力,对船体设备舵装置设计方案和实际选型计算进行研究和讨论。对多个舵选型公式进行对比,在完成船型研发任务的同时形成一套合理的舵系设计流程:参考同类型先进船型信息,结合规范要求和水池方意见,确定舵装置设计参数。该设计流程可在较大程度上提高工作效率和质量,为快速研发新船型提供支持。     

Analysis on maneuvering motion characteristics of submarine under static moment in vertical plane北大核心CSCD

[Objectives]Aiming at the problem of poor depth-changing ability of the stern rudder of submarine at low speed, and the problem of reversing the movement trend is difficult when the stern rudder is stuck and encountering abrupt changes of seawater density in the vertical steering maneuver. This paper conducts the mechanism research of static moment maneuver. [Methods]First, it is proved through theoretical analysis that the static moment maneuver can eliminate the reversed velocity phenomenon of the stern rudder. Then, the surfacing process under the static moment maneuver and the rudder hydrodynamic control is numerically simulated. [Results]The simulation results show that the static moment maneuver can make the submarine maintain good vertical plane maneuverability at low speed, eliminate the reversed velocity phenomenon of the stern rudder, and avoid excessive trim angle of the submarine at high speed. At the same time, the recovery effect of the two emergency situations of rudder jamming and falling deep has been improved. [Conclusions]The static moment maneuver is beneficial to the maneuverability and safety of the submarine. The research in this article can provide a reference for the maneuverability design of submarine. © 2023 The Author(s).     

Robust adaptive course-keeping control of under-actuated ships with the rudder failure北大核心CSCD

[目的]针对舵机故障、控制增益未知和海洋环境干扰情况下的欠驱动船舶航向保持问题,设计一种考虑舵机故障的船舶鲁棒自适应航向保持控制算法。[方法]通过结合鲁棒神经阻尼技术和自适应方法,对繁重的神经网络权值进行横向压缩,仅需设计2个自适应学习参数对未知增益和舵机故障参数在线补偿,以确保船舶在舵机故障的情况下能够有效执行航向保持任务。通过李雅普诺夫理论,证明所提出的控制器半全局最终一致稳定有界(semi-global uniform and ultimately bounded,SGUUB)。最后以“育鲲”轮为仿真对象,建立非线性Nomoto数学模型,在海洋干扰下进行对比仿真试验验证。[结果]结果表明,在此策略下,“育鲲”轮在舵机故障情况下平均舵角输出比仿真试验中所对比的传统方法降低了51%,可改善航向保持控制效果。[结论]研究结果可为欠驱动船舶的航向保持控制问题提供借鉴。