Greenhouse gas emissions from ships in ports – Case studies in four continents

Emissions of GHG from the transport sector and how to reduce them are major challenges for policy makers. The purpose of this paper is to analyse the level of greenhouse gas (GHG) emissions from ships while in port based on annual data from Port of Gothenburg, Port of Long Beach, Port of Osaka and Sydney Ports. Port call statistics including IMO number, ship name, berth number and time spent at berth for each ship call, were provided by each participating port. The IMO numbers were used to match each port call to ship specifications from the IHS database Sea-web. All data were analysed with a model developed by the IVL Swedish Environmental Research Institute for the purpose of quantifying GHG emissions (as CO₂-equivalent) from ships in the port area. Emissions from five operational modes are summed in order to account for ship operations in the different traffic areas. The model estimates total GHG emissions of 150,000, 240,000, 97,000, and 95,000 tonnes CO₂ equivalents per year for Gothenburg, Long Beach, Osaka, and Sydney, respectively. Four important emission-reduction measures are discussed: reduced speed in fairway channels, on-shore power supply, reduced turnaround time at berth and alternative fuels. It is argued that the potential to reduce emissions in a port area depends on how often a ship revisits a port: there it in general is easier to implement measures for high-frequent liners. Ships that call 10 times or less contribute significantly to emissions in all ports.     

Tuning of transfer functions for analysis of wave–ship interactions

Transfer functions are often used together with a wave spectrum for analysis of wave–ship interactions, where one application addresses the prediction of wave-induced motions or other types of global responses. This paper presents a simple and practical method which can be used to tune the transfer function of such responses to facilitate improved prediction capability. The input to the method consists of a measured response, i.e. time series sequences from a given sensor, the 2D wave spectrum characterising the seaway in which the measurements are taken, and an initial estimate of the transfer function for the response in study. The paper presents results obtained using data from an in-service container ship. The 2D wave spectra are taken from the ERA5 database, while the transfer function is computed by a simple closed-form expression. The paper shows that the application of the tuned transfer function leads to predictions which are significantly improved compared to using the transfer function without tuning.     

辽阳出口路现场热再生简析

重点介绍了辽阳出口路现场热再生沥青混合料的级配设计和施工工艺及施工过程中的质量控制要点。     

关于山区高速外业勘察中若干问题的探讨

近几年来,我国山区高速建设里程日益增加.因受复杂地形、地质条件的限制,山区高速的外业勘察具有其独有的关键技术难点,应在普通建设条件下的作业内容、作业方式的基础上,采取针对性的对策措施,确保外勘资料满足设计需求.     

谈港口国船舶污染物接收设施问题报告的处置

文中探讨了一起国际航行船舶关于港口国船舶污染物接收设施问题报告的调查情况,介绍了此次船舶污染物接收设施问题报告的原因分析及采取的措施,并向接收设施的提供者和使用者给出了优化建议,明确了各有关部门在港口国船舶污染物接收设施履约工作上的重点。     

Full six degrees of freedom coupled dynamic simulation of ship collision and grounding accidents

By taking advantage of the user-defined load subroutine (loadud) and the user common subroutine (usercomm) in LS-DYNA, the authors proposed a new coupled approach for simultaneously calculating structural damage and the planar 3DOF ship motions in ship collisions. The coupled procedure aimed at predicting the detailed structural damage together with reasonable global ship motions. This paper extends the method to consider the full 6DOF ship motions; thus, ship collision as well as grounding accidents can be properly handled. This method is particularly useful for design purposes because the detailed ship hull profile is not needed.A traditional ship maneuvering model is used for the in-plane surge, sway and yaw degrees of freedom with a series of nondimensional coefficients determined from experiments. It is assumed that the out-of-plane degrees of freedom are not coupled with the in-plane ship motions, and there is no coupling among roll, pitch and heave motions. The implementation is verified through free decay tests, and the obtained natural periods show good agreement with theoretical results.Several collision and grounding cases are simulated in which a supply vessel crashes into rigid plates with different orientations. The effects of the roll motion, the heave and pitch motions and the full 6DOF motions are studied. The results are compared with those from a 6DOF decoupled method. Ship motions through the proposed method compare reasonably well with SIMO results. It is found that several consecutive impacts may occur in the simulation of one collision case due to the periodic motions. This is not taken into account in the decoupled method, which makes this method unconservative.     

基于职业能力的高职会计实践教学体系的重构

文章通过分析高职会计专业构建实践教学体系的必要性入手，分析会计职业能力的内涵，从会计课程体系、实训项目体系、实训项目教学设计三个方面探索了现代高职会计实践教学体系的构建，拓展会计实践教学的实训资源，完善构建实践教学体系的机制。     

递进式连锁经营管理专业实践教学改革研究——基于加盟创业项目视角

连锁经营管理专业人才培养目标大多定位在一线服务员或基层管理者，所培养的学生必须具备较强的连锁专业能力和创业能力，而大多数高职院校培养出来的学生在这些方面所表现出来的能力却差强人意，尤其是创业能力方面。本文提出将加盟创业项目贯穿于连锁经营管理实践教学全过程，按照“仿真训练-校内孵化-校内模拟-市场全真”四个阶段，形成一个递进式的实践教学流程，从而促使学生的专业能力和创业能力实现递进式提升。     

Design,analysis and performance evaluation of a third order distributed protocol for platooning in the presence of time-varying delays and switching topologies

This paper is concerned with the problem of designing a decentralized consensus protocol for platooning of non-identical vehicles in the presence of heterogeneous time-varying communication delays. The proposed control protocol makes use of a state feedback and to this aim drivetrain dynamics are modeled as third-order linear systems. Necessary and sufficient conditions for convergence and exponential stability, derived by using an appropriate Krasovskii functional, demonstrate the ability of the platoon in reaching the required regime with an exponentially bounded behavior. The proposed LMI-based approach allows to estimate both delay margin and decay rate. Moreover, convergence is proven under switching communication network topologies by means of a Lyapunov-Razumikhin function, and the assessment of a string stable behavior has been also theoretically investigated. High-fidelity simulations with Plexe show the effectiveness of the theoretical results in different driving conditions and in the presence of external disturbances and communication impairment. Different communication channel models are used in the validation stage to further prove robustness of the proposed methodology with respect hard delay and packets losses.     

CCS水电站引水隧洞双护盾TBM施工围岩分类研究

为了对双护盾TBM隧洞施工中的围岩进行分类,以厄瓜多尔CCS水电站引水隧洞为例,参考RMR围岩分类方法,通过伸缩护盾的间隙和刀盘的空隙对洞壁和掌子面围岩进行观测,结合岩渣及掘进参数,获取岩石的质量指标RQD、节理间距和节理性状等信息。通过综合分析,选取岩石的回弹值、围岩的完整性、岩石的质量指标RQD、刀盘推力、刀盘扭矩、片状岩渣含量和地下水渗流量作为围岩分类的指标,然后对7个指标分别赋值,建立围岩的分类标准,并通过求和的方法进行综合围岩分类。分类结果表明:选取的7个指标可以克服双护盾TBM施工时无法对围岩进行全面地质素描的困难,可以满足TBM快速施工的需要,并且能较真实地反映围岩的情况,分类结果可靠。