Experimental study on the width of the turbulent area around bridge pier

At present, the method of calculating the turbulent flow width around the bridge pier is not given in the "Standard for Inland River Navigation" (GB50139-2004) in China, and the bridge designer usually increases the bridge span in order to ensure the navigation safety, which increases both of the structural design difficulty and the project investments. Therefore, it is extremely essential to give a research on the turbulent flow width around the bridge pier. Through the experiments of the fixed bed and the mobile bed, the factors influencing the turbulent flow width around the bridge pier have been analyzed, such as the approaching flow speed, the water depth, the angles between the bridge pier and the flow direction, the sizes of bridge pier, the shapes of the bridge pier, and the scouring around the bridge pier, etc. Through applying the dimension analytic method to the measured data, the formula of calculating the turbulent flow width around the bridge pier is then inferred.     

Instantaneous communication throughputs of vehicular ad hoc networks

Vehicular ad hoc networks (VANETs) formed by connected vehicles in a traffic stream could be applied to improve safety, mobility, and environmental impacts of a transportation system. In this paper, we present analytical models for the instantaneous communication throughputs of VANETs to measure the efficiency of information propagation under various traffic conditions at a time instant. In particular, we define broadcast and unicast communication throughputs by the wireless channel bandwith multiplied by the average probabilities that one vehicle is a successful receiver and sender in a VAENT, respectively. With a protocol communication model, we derive formulas to determine the probabilities for an equipped vehicle to be a successful broadcast receiver and a successful unicast receiver/sender, and obtain broadcast and unicast throughputs along discrete and continuous traffic streams. We further examine the impacts on communication throughputs of the transmission range and the interference range of dedicated short range communication devices as well as the market penetration rate of equipped vehicles and the percentage of senders. Finally, we investigate the influence of shock waves on communication throughputs.     

基于移动Agent动态自适应网格资源的管理模型

网格的资源管理在网格计算中有着非常重要的地位,介绍了移动agent技术,以及网格资源管理模型应具备的特征,最后提出基于移动agent的网格资源管理模型来解决网格中资源管理,作业调度,负载平衡的问题.     

基于DDE技术实现Matlab与InTouch通讯研究

为了实现Matlab与InTouch之间直接通讯,分别介绍了Matlab软件和InTouch软件所提供的DDE接口,并在Matlab环境下,编写了基于DDE技术的M文件和S函数,这两种方法首次实现了Matlab和In-Touch之间的直接通讯。并解决了利用第三方软件进行接口编程的难题。通过实例证明了这种方法具有编程简单,实现方便等优点,并且支持多输入多输出模型的数据交换。     

船舶操纵模拟系统视景多通道同步技术研究

介绍船舶操纵训练系统视景的体系结构,提出视景多通道同步的要求及其技术实现的方法,采用多线程结构及推算定位等技术实现多通道同步,使通道帧数差在2帧以内,各通道产生的画面达到同一时刻同一视点产生的效果.     

时速350 km中国标准动车组车载天线的隔离度及最小排布间距

基于中国标准动车组车载终端设备的部署现状和未来规划,调研其采用的通信系统类型、车载天线的工作频率和安装数量;以900MHz频段GSM-R系统、450MHz频段和2 100MHz频段LTE-R系统为例,对车载终端的杂散干扰进行理论分析,基于自由空间损耗理论模型计算、电磁软件仿真模拟和试验平台实测的结果,研究车载天线的隔离...     

传输技术在城市轨道交通中的应用

介绍了城市轨道交通传输系统承载的各种业务类型.对适合城市轨道交通的各种传输技术及在国内的应用作了比较.分析了城市轨道交通中现有通信业务的特点.单一的传输技术已很难满足轨道交通业务的快速增长,提出推荐采用MSTP(多业务传输平台)和RPR(3单性分组环)两种传输技术,以充分发挥各自的优越性,取长补短.     

基于模型视图控制器框架的多功能车辆总线一致性测试的实现

一致性测试是通信设备实现互操作的必要条件.简单介绍了对列车通信网(TCN)进行一致性测试的重要性和模型视图控制器(MVC)框架.重点描写了对多功能车辆总线(MVB)进行一致性测试所包括的内容、测试的方案和步骤,以及如何在MVC这种优秀的框架中实现.在实验室搭建了测试平台,使用的是Duagon公司D114MVB网卡,测试结果真实有效.     

基于铁路通信光缆维护要点分析与故障处理探究

主要对铁路通信光缆维护工作要点进行阐述,并积极探讨出具体的故障处理措施,希望能够对日常维护工作起到一定的参考作用.     

下一代网络(NGN)与移动IPv6

下一代网络(NGN)是目前网络发展的趋势,是今后通信业务和互联网业务的核心,其核心承载将使用IPv6技术。作为IPv6内在组成部分的移动IPv6技术,对于下一代网络,尤其是对于下一代移动通信网络,有着极其重要的影响。通过移动IPv6技术,可以各种接入方式,将宽带、移动互联网和现有的无线系统等都无缝地集成到IP层,通过一种网络基础设施提供所有通信和信息服务,即是下一代网络发展的方向,也是移动IPv6的核心优势。