视讯会议系统“一键点名”功能硏究

以铁路视讯会议网工程建设标准和视讯会议系统网管的标准配置文件为基础,通过反复试验和结果分析,确定广铁集团视讯会议操作繁琐的原因,并提出相应的优化方案,提高了广铁集团视讯会议系统会议控制的效率。     

Dynamic traffic metering in urban street networks: Formulation and solution algorithm

Traffic metering offers great potential to reduce congestion and enhance network performance in oversaturated urban street networks. This paper presents an optimization program for dynamic traffic metering in urban street networks based on the Cell Transmission Model (CTM). We have formulated the problem as a Mixed-Integer Linear Program (MILP) capable of metering traffic at network gates with given signal timing parameters at signalized intersections. Due to the complexities of the MILP model, we have developed a novel and efficient solution approach that solves the problem by converting the MILP to a linear program and several CTM simulation runs. The solution algorithm is applied to two case studies under different conditions. The proposed solution technique finds solutions that have a maximum gap of 1% of the true optimal solution and guarantee the maximum throughput by keeping some vehicles at network gates and only allowing enough vehicles to enter the network to prevent gridlocks. This is confirmed by comparing the case studies with and without traffic metering. The results in an adapted real-world case study network show that traffic metering can increase network throughput by 4.9–38.9% and enhance network performance.     

Optimal design of electric vehicle public charging system in an urban network for Greenhouse Gas Emission and cost minimization

In this paper, we address the optimization problem of allocation of Electric Vehicle (EV) public fast charging stations over an urban grid network. The objective is to minimize Greenhouse Gas Emissions (GHG) under multiple constraints including a limited agency budget, accessibility of charging stations in every possible charging request and charging demands during peak hours. Additionally, we address bi-criteria problems to consider user costs as the second objective. A convex parsimonious model that depends on relatively few assumptions and input parameters is proposed and it is shown to be useful for obtaining conceptual insights for high-level planning. In a parametric study using a hypothetical urban network model generated based on realistic parameters, we show that GHG emissions decrease with agency budget, and that the reductions vary depending on multiple factors related to EV market and EV technologies. The optimal solutions found from the bi-criteria problems are shown to be close to the solution minimizing GHG emissions only, meaning that the emission minimizing policy can also minimize user costs.     

钩形外锁闭装置锁闭框组优化的探讨

钩形外锁闭装置在实践中逐步暴露出一些诸如转换不畅、卡阻,磨耗严重,适应尖轨窜动性不良等问题.为此研究探讨对既有的外锁闭装置锁闭框组（包括锁闭框、锁闭铁、耐磨板等）进行优化,提高道岔转换的可靠性.     

Optimal placement of omnidirectional sensors in a transportation network for effective emergency response and crash characterization

Rapid motor vehicle crash detection and characterization is possible through the use of Intelligent Transportation Systems (ITS) and sensors are an integral part of any ITS system. The major focus of this paper is on developing optimal placement of accident detecting omnidirectional sensors to maximize incident detection capabilities and provide ample opportunities for data fusion and crash characterization. Both omnidirectional sensors (placed in suitable infrastructure locations) and mobile sensors are part of our analysis. The surrogates used are acoustic sensors (omnidirectional) and Advanced Automated Crash Notification (AACN) sensors (mobile). This data fusion rich placement is achieved through a hybrid optimization model comprising of an explicit–implicit coverage model followed by an evaluation and local search optimization using simulation. The compound explicit–implicit model delivers good initial solutions and improves the detection and data fusion capabilities compared to the explicit model alone. The results of the studies conducted quantify the use of a data fusion capable environment in crash detection scenarios, and the simulation tool developed helps a decision maker evaluate sensor placement strategy.     

船用柴油机SCR催化器载体结构参数仿真优化

利用AVL_BOOST软件建立了某船用柴油机SCR催化器仿真模型,通过响应面优化法和BBD试验设计法开展仿真试验,得到以NO_X转化率为目标函数,压降和NH_3滑移量为约束条件的回归方程。通过回归方程对SCR催化器载体结构参数进行优化,优化结果为:横截面积为0.069m~2,长度0.833m,载体孔密度为22/cm~2,涂层厚度0.01mm,载体壁厚0.15mm。     

牵引车车架横梁开裂分析及优化改善

针对某牵引车车架横梁开裂事件,使用Creo构建整车三维模型,导入Hyperworks中进行前处理网格划分等,使用Optistruct进行求解得出弯曲、制动、左转弯、右转弯、扭转、扭转+转弯工况等分析结果,将结果与实际开裂情况进行了对比,结果表明在扭转+转弯工况下第三横梁开裂,与分析结果一致,并提出横梁优化方案进行求解,分析结果表明在扭转+转弯工况下,第二横梁最大应力值降低38.1%,第三横梁最大应力值降低64.3%,提出后续牵引车设计时横梁优化意见及注意事项。     

1+X证书制度下汽车运用与维修技术专业实训资源建设路径探析

文章以汽车运用与维修技术专业为例,分析该专业的实训资源在1+X证书制度实施过程中存在的问题,提出实训资源优化整合建设的必要性。依据《汽车运用与维修(含智能新能源汽车)职业技能领域职业技能等级标准》设计出汽车运用与维修技术专业实训资源优化整合建设架构图,并对实训资源优化整合建设给出了详细的方案。     

Environmental impacts of public transport systems using real-time control method

Public Transport (PT) systems rely more and more on online information extracted from both operator’s intelligent equipment and user’s smartphone applications. This allows for a better fit between supply and demand of the multimodal PT system, especially through the use of PT real-time control actions/tactics. In doing so there is also an opportunity to consider environmental-related issues to approach energy saving and reduced pollution. This study investigates and analyses the benefits of using real-time PT operational tactics in reducing the undesirable environmental impacts. A tactic-based control (TBC) optimization model is used to minimize total passenger travel time and maximize direct transfers (without waiting). The model consists of a control policy built upon a combination of three tactics: holding, skip-stops, and boarding limit. The environmental-related measure is the global warming potential (GWP) using the life cycle assessment technique. The methodology developed is applied to a real life case study in Auckland, New Zealand. Results show that TBC could reduce the GWP by means of reduction of total passenger travel times and vehicle travel cycle time. That is, the TBC model results in a 5.6% reduction in total GWP per day compared with an existing no-tactic scenario. This study supports the use of real-time control actions to maintain a reliable PT service, reducing greenhouse gas emissions and subsequently moving towards greener PT systems.     

铁路空车调整优化模型及其蚁群算法

以理论研究为主,通过对空车调整问题的特点分析,明确了空车数量调配和网络配流是空车调整的两个核心问题;在分析已有模型及对问题进行抽象描述的基础上,建立了空车调整协同优化（EWDCO）模型,并设计了相应的蚁群算法。分析发现,共同径路约束与EWDCO模型是不协调的;通过对定理的证明得出,对流约束不会对EWDCO模型的最优解产生影响,模型可以描述为线性整数规划模型,其实质是带容量约束的最小费用流模型。同时,研究表明ACO对求解空车调整问题具有一定的优势,是一种较为有效的算法。