太阳能游船光伏逆变器控制系统EMC设计

从船舶环境和光伏逆变器的基本原理和功能出发,分别对太阳能游船EMC干扰源和干扰路径进行分析,通过信号滤波与保护、工艺设计和试验测试,实现高可靠性的太阳能游船光伏逆变器控制系统研究和设计,为太阳能游船的光伏逆变器控制系统研究提供基本EMC设计思路与实现技巧。     

哈牡线季节性冻土接触网基础处理措施探讨

针对哈尔滨至牡丹江电气化改造工程季节性冻土分布的实际工程特点,结合季节性冻土条件下接触网基础的设计理念,对本项目选用的扩大型钢柱基础和不带扩底的拉线基础进行切向冻胀应力计算分析,并考虑影响切向冻胀力的水分、土质、负温以及基础侧表面的粗糙度等主要因素,提出了对钢柱基础采用换填加扩大型基础的处理措施,对接触网的下锚拉线基础提出了换填及加大埋深等防冻胀处理措施以抵抗季节性冻土的上拔力。     

Modeling free-flow speed according to different water depths—From the viewpoint of dynamic hydraulic pressure

In this paper, we propose a method of modeling free flow speed from the viewpoint of hydroplaning. First, the lift forces for different water depths were estimated using Bernoulli’s equation. Compared with the result of the experimental test performed by the Japan Automobile Research Institute, the hydrodynamic pressure coefficient was determined to be 0.03 (tf s²/m⁴). The validation of the predicted lift force is found in another published paper. A very good match is found between the computed values by the proposed numerical model and the data in other published papers. Then, the loss of contact force is considered to evaluate the hydroplaning performance of a tire. To simulate the hydroplaning speed, a tire-sliding model was utilized to obtain the traction and friction forces between the road surface and the tire. The observation data obtained in Japan in 2009 is compared with the physically computed hydroplaning speed, yielding the conclusion that the traction force at the measured desired speed is, on average, 23.4% of the traction force at hydroplaning speed. The analytical model offers a useful tool to quantitatively show that the free flow speed changes as the water depth increase.     

视讯会议系统“一键点名”功能硏究

以铁路视讯会议网工程建设标准和视讯会议系统网管的标准配置文件为基础,通过反复试验和结果分析,确定广铁集团视讯会议操作繁琐的原因,并提出相应的优化方案,提高了广铁集团视讯会议系统会议控制的效率。     

Highway voting system: Embracing a possible paradigm shift in traffic data acquisition

The integration of internet and mobile phones has opened the door to a new wave of utilizing private vehicles as probes not only for performance evaluation but for traffic control as well, gradually replacing the role of traffic surveillance systems as the dominant source of traffic data. To prepare for such a paradigm shift, one needs to overcome some key institutional barriers, in particular, the privacy issue. A Highway Voting System (HVS) is proposed to address this issue in which drivers provide link- and/or path-based vehicle data to the traffic management system in the form of “votes” in order to receive favorable service from traffic control. The proposed HVS offers a platform that links data from individual vehicles directly with traffic control. In the system, traffic control responds to voting vehicles in a way similar to the current system responding to prioritized vehicles and providing the requested services accordingly. We show in the paper that the proposed “voting” system can effectively resolve the privacy issue which often hampers traffic engineers from getting detailed data from drivers. Strategies to entice drivers into “voting” so as to increase the market penetration level under all traffic conditions are discussed. Though the focus of the paper is on addressing the institutional issues associated with data acquisition from individual vehicles, other research topics associated with the proposed system are identified. Two examples are given to demonstrate the impact of the proposed system on algorithm development and traffic control.     

Traffic modelling in system boundary expansion of road pavement life cycle assessment

This paper uses a case study of a UK inter-urban road, to explore the impact of extending the system boundary of road pavement life cycle assessment (LCA) to include increased traffic emissions due to delays during maintenance. Some previous studies have attempted this but have been limited to hypothetical scenarios or simplified traffic modelling, with no validation or sensitivity analysis. In this study, micro-simulation modelling of traffic was used to estimate emissions caused by delays at road works, for several traffic management options. The emissions were compared to those created by the maintenance operation, estimated using an LCA model. In this case study, the extra traffic emissions caused by delays at road works are relatively small, compared to those from the maintenance process, except for hydrocarbon emissions. However, they are generally close to, or above, the materiality threshold recommended in PAS2050 for estimating carbon footprints, and reach 5–10% when traffic flow levels are increased (hypothetically) or when traffic management is imposed outside times of lowest traffic flow. It is recommended, therefore, that emissions due to traffic disruption at road works should be included within the system boundary of road pavement LCA and carbon footprint studies and should be considered in developing guidelines for environmental product declarations of road pavement maintenance products and services.     

Nonlinear pricing in linear cities with elastic demands

Nonlinear road pricing charges each traveler based on his/her trip’s corresponding particular attribute level. In order to help authorities in designing road pricing systems at a strategic level, this paper attempts to address two fundamental questions: (i) what is the value of pricing’s nonlinearity for mitigating traffic congestion? (ii) if a nonlinear toll function is implemented, should it be convex, concave or other shape? Specifically, we consider distance-based pricing in linear cities. For linear monocentric cities with heterogeneous travelers, we show that the system optimal distance-based pricing indeed exhibits nonlinearity. It is proved that: (i) the cost-based system optimal toll function is monotonically increasing and concave with respect to the traveled distance; (ii) the time-based system optimal toll function always exists and is unique. If the initial proportion of each traveler group is invariant along a corridor and the demand function is of exponential type, then the time-based system optimal toll function enables the travelers, living further away from a city center, to face a lower toll level per unit distance. For a linear polycentric city, we demonstrate: (i) there always exists the system optimal differentiated (in terms of city centers) toll functions; (ii) it is highly possible that the system optimal non-differentiated toll function does not exist. Hence, we further propose an optimal toll design model, prove the Lipschitz continuity of its objective and adopt a global-optimization algorithm to solve it.     

从一起船舶主机拉缸故障谈柴油机润滑油的选用

通过某LPG船一起主机拉缸案例,阐述船舶柴油机润滑油合理选用和管理的重要性,讨论选用润滑油应根据船舶柴油机的型号、燃油品质等具体情况,充分考虑润滑油的黏度等级和碱度。介绍船用柴油机润滑油国内外主要生产商及其相应的产品牌号。     

Formal scientific research of traffic collision data utilizing GIS

This paper explores the tenuous link between speeding behavior and accident causation, one that has not been well established in the international literature to date. Taking advantage of established engineering conventions and formulae, we were able to set up an a priori hypothesis suitable for testing. Utilizing this formal scientific method (which GIS researchers have been criticised for not using) we establish a statistical link for this relationship. Our methodology can be used to support all police intervention strategies, including the controversial photo radar systems. The results from our research have been entered into a GIS in order to create a map for spatial display. This map illustrates the relative probability or risk of collision occurrence resulting from speeding at all intersections and interchanges within the scope of the study. It is suggested that this methodology could easily be maintained with periodic updates of data, thus creating a dynamic model from which to monitor traffic safety within the city. Furthermore, this model can be utilized to study specific strategies, allowing for the scrutiny of before, during and after effects. The study area is the entire city of Calgary, Alberta, Canada, and includes all traffic collisions occurring during the year of 1994.     

公交通行能力约束的智能调度优化模型

公交通行能力是解决城市交通拥堵问题、促进城市公共交通系统高效运行的要素之一。介绍了公交通行能力的计算要素,并针对目前我国城市由于盲目调度造成的公交系统运营效率、服务水平下降的问题,提出将公交通行能力作为约束条件对公交调度进行优化。鉴于公交企业制订调度方案时需兼顾公交服务水平和企业效益,将智能调度的目标确定为候车时间满意度、候车空间满意度、车内舒适满意度和企业满意度加权平均值最大,并给出了相应的计算方法。最后讨论了利用遗传算法对模型进行求解的过程。