客运专线通信运维管理模式的探索

目前客运专线运维管理存在大量空白。合肥高速铁路通信段接管全路首条客专线合宁线之后,积极探索修程修制和进行安全体系建设,已形成了一套完整的管理体系,在应急机制、安全卡控、检修制度改革和团队建设等方面取得的成果,对于新建客专线的运维管理具有借鉴意义。     

两个气泡相互作用的某些动力特性研究

文章采用边界积分方法模拟三维水下气泡的动力特性,详细阐述气泡计算的数学模型和数值实施过程,探究了三种不同浮力参数情况下(无重力、弱浮力、强浮力)气泡的演变情况。计算结果表明,在不同的浮力参数下,气泡形状和射流特点有着显著的区别,射流形成和发展与重力有着密切的联系。文中计算了两气泡在不同距离和不同强度参数下的相互作用的特点,为气泡动力特性的研究提供了参考。     

基于虚拟样机的空气悬架大客车平顺性仿真分析

以空气悬架大客车为研究对象,采用多体系统动力学的理论方法,建立某型客车的虚拟样机仿真模型,并进行平顺性仿真。最后测试车身上相应位置的加速度值,对模型进行验证。     

The Force-Angle Measure of Tipover Stability Margin for Mobile Manipulators

Mobile manipulators operating in field environments will be required to apply large forces, or manipulate large loads, and to perform such tasks on uneven terrain which may cause the system to approach, or reach, a dangerous tipover instability. To avoid tipover in an automatic system, or to provide a human operator with an indication of proximity to tipover, it is necessary to define a measure of available stability margin. This work presents a new tipover stability measure (the Force-Angle stability measure) which has a simple geometric interpretation, is easily computed, and is sensitive to changes in Center of Mass height. The proposed metric is applicable to systems subject to inertial and external forces, operating over even or uneven terrains. Requirements for computation and implementation of the measure are described, and several different categories of application of the measure are presented along with useful normalizations. Performance of the Force-Angle measure is demonstrated and compared with that of other stability margin measures using a forestry vehicle simulation. Results show the importance of considering both center-of-mass height and system heaviness, and confirm the effectiveness of the Force-Angle measure in monitoring the tipover stability margin.     

Establishment of Model for Tire Steady State Cornering Properties using Experimental Modal Parameters

Modeling of tire cornering properties using experimental modal parameters is studied. With tire lateral experimental modal parameters, the distribution of side force and lateral deformation under total adhesive and sliding conditions are obtained. Side force, self-aligning, cornering stiffness and relaxation length under different loads and friction coefficients are also calculated. The calculated results are in correspondence to experimental results in the references qualitatively. The non-dimensional side force obtained from the calculated results is compared with the Fiala model, its modified expression by experiments and also the widely used empirical Magic Formula model. The calculated results tally well with the fitted results obtained using Magic Formula model. It can be seen that the tire steady state cornering model using experimental modal parameters proposed in this paper is better for an in-depth study of tire natural characteristics, and the labored experimental work can be avoided.     

Interaction of vehicle and steering system regarding on-centre handling

For the on-centre handling behaviour of vehicles the steering system is absolutely important. To investigate the interaction of the vehicle and steering system a validated, especially tailored simulation model was developed. Some meaningful vehicle and steering system parameters are altered to show the influence on steering wheel torque, steering feel and understeer. The results underline the importance of an accurate steering system model. Identified measures to improve the centre feel and steering response were a stiffer torsion bar, a higher cornering stiffness or a lower overall steering ratio. The steering response, however, suffers when the centre feel is improved by a higher trail. The steering rack friction reduces mainly the steering response while the steering column friction decreases the centre feel whereas a stiffer torsion bar lessens the understeer tendency.     

Material characteristics of a vehicle door seal and its effect on vehicle vibrations

The vibration characteristics of the door panels are affected by the weatherstrip seals used in between the doors and vehicle body along the perimeter of the doors. The weatherstrip seals exhibit nonlinear and viscoelastic material properties that vary with frequency, temperature, strain rate and amplitude, and previous load history. The material properties of the seal must be investigated carefully in order to predict the vibration characteristics of the automobiles under different loading conditions.

In this study, we developed hyperelastic and viscoelastic models of the weatherstrip seal to predict dynamic performance of a vehicle door and its effect on the overall vehicle dynamics. For this purpose, first, static compression and stress relaxation experiments were performed on the seal using a robotic indenter equipped with force and displacement sensors and then a finite element model utilising the results of these experiments was developed in ANSYS. Finally, a representative model of the seal was integrated into the finite element model of the vehicle door to investigate its effect on the vehicle vibrations. The model predictions were validated using experimental modal analysis performed on the vehicle door with and without the seal. It was observed that the seal has a significant effect on the vehicle dynamics.     

Heavy vehicle pitch dynamics and suspension tuning. Part I: unconnected suspension

The influence of suspension tuning of passenger cars on bounce and pitch ride performance has been explored in a number of studies, while only minimal efforts have been made for establishing similar rules for heavy vehicles. This study aims to explore pitch dynamics and suspension tunings of a two-axle heavy vehicle with unconnected suspension, which could also provide valuable information for heavy vehicles with coupled suspensions. Based on a generalised pitch-plane model of a two-axle heavy vehicle integrating either unconnected or coupled suspension, three dimensionless measures of suspension properties are defined and analysed—namely the pitch margin (PM), pitch stiffness ratio (PSR), and coupled pitch stiffness ratio (CPSR)—for different unconnected suspension tunings and load conditions. Dynamic responses of the vehicle with three different load conditions and five different tunings of the unconnected suspension are obtained under excitations arising from three different random road roughness conditions and a wide range of driving speeds, and braking manoeuvres. The responses are evaluated in terms of performance measures related to vertical and pitch ride, dynamic tyre load, suspension travel, and pitch-attitude control characteristics of the vehicle. Fundamental relationships between the vehicle responses and the proposed suspension measures (PM, PSR, and CPSR) are established, based on which some basic suspension tuning rules for heavy vehicles with unconnected suspensions are also proposed.     

Influence of the aerodynamic forces on the pantograph–catenary system for high-speed trains

Most of the high-speed trains in operation today have the electrical power supply delivered through the pantograph–catenary system. The understanding of the dynamics of this system is fundamental since it contributes to decrease the number of incidents related to these components, to reduce the maintenance and to improve interoperability. From the mechanical point of view, the most important feature of the pantograph–catenary system consists in the quality of the contact between the contact wire of the catenary and the contact strips of the pantograph. The catenary is represented by a finite element model, whereas the pantograph is described by a detailed multibody model, analysed through two independent codes in a co-simulation environment. A computational procedure ensuring the efficient communication between the multibody and finite element codes, through shared computer memory, and suitable contact force models were developed. The models presented here are contributions for the identification of the dynamic behaviour of the pantograph and of the interaction phenomena in the pantograph–catenary system of high-speed trains due to the action of aerodynamics forces. The wind forces are applied on the catenary by distributing them on the finite element mesh. Since the multibody formulation does not include explicitly the geometric information of the bodies, the wind field forces are applied to each body of the pantograph as time-dependent nonlinear external forces. These wind forces can be characterised either by using computational fluid dynamics or experimental testing in a wind tunnel. The proposed methodologies are demonstrated by the application to real operation scenarios for high-speed trains, with the purpose of defining service limitations based on train and wind speed combination.     

Asymptotic sideslip angle and yaw rate decoupling control in four-wheel steering vehicles

This paper shows that, for a four-wheel steering vehicle, a proportional-integral (PI) active front steering control and a PI active rear steering control from the yaw rate error together with an additive feedforward reference signal for the vehicle sideslip angle can asymptotically decouple the lateral velocity and the yaw rate dynamics; that is the control can set arbitrary steady state values for lateral speed and yaw rate at any longitudinal speed. Moreover, the PI controls can suppress oscillatory behaviours by assigning real stable eigenvalues to a widely used linearised model of the vehicle steering dynamics for any value of longitudinal speed in understeering vehicles. In particular, the four PI control parameters are explicitly expressed in terms of the three real eigenvalues to be assigned. No lateral acceleration and no lateral speed measurements are required. The controlled system maintains the well-known advantages of both front and rear active steering controls: higher controllability, enlarged bandwidth for the yaw rate dynamics, suppressed resonances, new stable cornering manoeuvres and improved manoeuvrability. In particular, zero lateral speed may be asymptotically achieved while controlling the yaw rate: in this case comfort is improved since the phase lag between lateral acceleration and yaw rate is reduced. Also zero yaw rate can be asymptotically achieved: in this case additional stable manoeuvres are obtained in obstacle avoidance. Several simulations, including step references and moose tests, are carried out on a standard small SUV CarSim model to explore the robustness with respect to unmodelled effects such as combined lateral and longitudinal tyre forces, pitch, roll and driver dynamics. The simulations confirm the decoupling between the lateral velocity and the yaw rate and show the advantages obtained by the proposed control: reduced lateral speed or reduced yaw rate, suppressed oscillations and new stable manoeuvres.