Intermodal transport in freight distribution: a literature review

There has been significant growth in research on intermodal transport in freight distribution since the 1990s. Differentiating itself from previously published literature reviews, this paper evaluates the current state of this research using Systematic Literature Review methodology. The complementary aims are: (a) to identify the research lines developed and to propose a criterion for classifying the literature, and (b) to discuss the empirical evidence that identifies existing interrelationships. The analysis has enabled three main lines of research to be identified. The first research line, basic principles of intermodal transport, groups together works related to the definition of intermodal transport and the results obtained using this transportation system. The second, improvements to the way that intermodal transport systems work, frames elements and variables that impact intermodal transport systems’ logistics efficiency, such as quality of service, information and communication systems, and freight planning and linkages among system operators to provide an adequate service. Finally, the third line, intermodal transport system modelling, identifies the main variables used to optimise these transport systems, the different focuses and approaches used in modelling, and the advantages and disadvantages of each focus. These research lines take in more specific sublines that incorporate articles that develop related research questions. Lastly, the discussion of the content of each of these research sublines enables us to identify gaps in the literature and comment on directions for future research.     

Direct formulation and algorithms for the probit-based stochastic user equilibrium traffic assignment problem

This paper proposes simple and direct formulation and algorithms for the probit-based stochastic user equilibrium traffic assignment problem. It is only necessary to account for random variables independent of link flows by performing a simple transformation of the perceived link travel time with a normal distribution. At every iteration of a Monte-Carlo simulation procedure, the values of the random variables are sampled based on their probability distributions, and then a regular deterministic user equilibrium assignment is carried out to produce link flows. The link flows produced at each iteration of the Monte-Carlo simulation are averaged to yield the final flow pattern. Two test networks demonstrate that the proposed algorithms and the traditional algorithm (the Method of Successive Averages) produce similar results and that the proposed algorithms can be extended to the computation of the case in which the random error term depends on measured travel time.     

道路运输行业安全监管现状分析及对策研究

结合道路运输行业安全监管现状,从道路运输行业安全监管职责和内容、监管方式、安全检查方面对道路运输行业安全监管存在的问题进行分析,并有针对性的提出了相应的建议和对策。     

The identification and empirical characterization of vehicular (Lagrangian) fundamental diagrams in multilane traffic flow

Traditional macroscopic traffic flow modeling framework adopts the spatial–temporal coordinate system to analyze traffic flow dynamics. With such modeling and analysis paradigm, complications arise for traffic flow data collected from mobile sensors such as probe vehicles equipped with mobile phones, Bluetooth, and Global Positioning System devices. The vehicle‐based measurement technologies call for new modeling thoughts that address the unique features of moving measurements and explore their full potential. In this paper, we look into the concept of vehicular fundamental diagram (VFD) and discuss its engineering implications. VFD corresponds to a conventional fundamental diagram (FD) in the kinematic wave (KW) theory that adopts space–time coordinates. Similar to the regular FD in the KW theory, VFD encapsulates all traffic flow dynamics. In this paper, to demonstrate the full potential of VFD in interpreting multilane traffic flow dynamics, we generalize the classical Edie's formula and propose a direct approach of reconstructing VFD from traffic measurements in the vehicular coordinates. A smoothing algorithm is proposed to effectively reduce the nonphysical fluctuation of traffic states calculated from multilane vehicle trajectories. As an example, we apply the proposed methodology to explore the next‐generation simulation datasets and identify the existence and forms of shock waves in different coordinate systems. Our findings provide empirical justifications and further insight for the Lagrangian traffic flow theory and models when applied in practice. Copyright © 2015 John Wiley & Sons, Ltd.     

Role of Bus‐Based Park and Ride in the UK: A Temporal and Evaluative Review

Abstract

The number of bus‐based Park and Ride (P&R) schemes in the UK has grown substantially over the past 40 years as a result of its encouragement by the Government as a tool to deal with increasing traffic congestion and traffic‐related pollution. The aim of this article is to analyse the degree to which P&R is effective in the contemporary policy context. The authors identify phases of development of P&R since its emergence as a local solution to transport capacity constraints in historic towns. Policy goals are identified against which a review of literature is used to highlight its effectiveness. It is concluded that P&R may increase the distance travelled by its users due to low load factors on dedicated buses, public transport abstraction and trip generation, although it is highlighted that there are areas in which further research is required to clarify its impacts.     

An improved cellular automaton with axis information for microscopic traffic simulation

Cellular Automaton (CA), an efficient dynamic modeling method that is widely used in traffic engineering, is newly introduced for traffic load modeling. This modeling method significantly addresses the modest traffic loads for long-span bridges. It does, however, require improvement to calculate precise load effects. This paper proposed an improved cellular automaton with axis information, defined as the Multi-axle Single-cell Cellular Automaton (MSCA), for the precise micro-simulation of random traffic loads on bridges. Four main ingredients of lattice, cells’ states, neighborhoods and transition rules are redefined in MSCA to generate microscopic vehicle sequences with detailed vehicle axle positions, user-defined cell sizes and time steps. The simulation methodology of MSCA is then proposed. Finally, MSCA is carefully calibrated and validated using site-specific WIM data. The results indicate: (1) the relative errors (REs) for the traffic parameters, such as volumes, speeds, weights, and headways, from MSCA are basically no more than ±10% of those of WIM data; (2) the load effects of three typical influence lines (ILs) with varied lengths of 50, 200 and 1000 m are also confidently comparable, both of which validate the rationality and precision of MSCA. Furthermore, the accurate vehicle parameters and gaps generated from MSCA can be applied not only for precise traffic loading on infrastructures but also for the accurate estimation of vehicle dynamics and safety. Hence, wide application of MSCA can potentially be expected.     

Estimating traffic volumes for signalized intersections using connected vehicle data

Recently connected vehicle (CV) technology has received significant attention thanks to active pilot deployments supported by the US Department of Transportation (USDOT). At signalized intersections, CVs may serve as mobile sensors, providing opportunities of reducing dependencies on conventional vehicle detectors for signal operation. However, most of the existing studies mainly focus on scenarios that penetration rates of CVs reach certain level, e.g., 25%, which may not be feasible in the near future. How to utilize data from a small number of CVs to improve traffic signal operation remains an open question. In this work, we develop an approach to estimate traffic volume, a key input to many signal optimization algorithms, using GPS trajectory data from CV or navigation devices under low market penetration rates. To estimate traffic volumes, we model vehicle arrivals at signalized intersections as a time-dependent Poisson process, which can account for signal coordination. The estimation problem is formulated as a maximum likelihood problem given multiple observed trajectories from CVs approaching to the intersection. An expectation maximization (EM) procedure is derived to solve the estimation problem. Two case studies were conducted to validate our estimation algorithm. One uses the CV data from the Safety Pilot Model Deployment (SPMD) project, in which around 2800 CVs were deployed in the City of Ann Arbor, MI. The other uses vehicle trajectory data from users of a commercial navigation service in China. Mean absolute percentage error (MAPE) of the estimation is found to be 9–12%, based on benchmark data manually collected and data from loop detectors. Considering the existing scale of CV deployments, the proposed approach could be of significant help to traffic management agencies for evaluating and operating traffic signals, paving the way of using CVs for detector-free signal operation in the future.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

Environmental impacts of public transport systems using real-time control method

Public Transport (PT) systems rely more and more on online information extracted from both operator’s intelligent equipment and user’s smartphone applications. This allows for a better fit between supply and demand of the multimodal PT system, especially through the use of PT real-time control actions/tactics. In doing so there is also an opportunity to consider environmental-related issues to approach energy saving and reduced pollution. This study investigates and analyses the benefits of using real-time PT operational tactics in reducing the undesirable environmental impacts. A tactic-based control (TBC) optimization model is used to minimize total passenger travel time and maximize direct transfers (without waiting). The model consists of a control policy built upon a combination of three tactics: holding, skip-stops, and boarding limit. The environmental-related measure is the global warming potential (GWP) using the life cycle assessment technique. The methodology developed is applied to a real life case study in Auckland, New Zealand. Results show that TBC could reduce the GWP by means of reduction of total passenger travel times and vehicle travel cycle time. That is, the TBC model results in a 5.6% reduction in total GWP per day compared with an existing no-tactic scenario. This study supports the use of real-time control actions to maintain a reliable PT service, reducing greenhouse gas emissions and subsequently moving towards greener PT systems.     

Cooperation in transit delivery in West German metropolitan areas

West Germany is densely populated, averaging 245 inhabitants/km², but varying widely between urban agglomerations and rural areas. Transport volume has increased by 40% since 1970, with virtually all growth due to private automobiles. Since 1981 public transit has been suffering from decreasing demand.A 1964 Expert's Report to the German federal government was the stimulus for initiating an effective funding mechanism for new public transit construction. In 1965 Germany's first federated transit authority was founded for the region of Hamburg.Principal among the goals of any cooperative agreement among transit companies are improvements for the passengers and improvement of revenues for the companies. To attain these ends, two distinct forms of transit aggrements have been developed in Germany: transit cooperative (Verkehrsgemeinschaft) and transit federation (Verkehrsverbund). The former is more suitable for smaller to medium-sized towns, while the latter is more suitable for larger cities. The two types are described in this article.German transit federations during the 1970s succeeded in significantly increasing ridership, while during the 1980s patronage has either remained steady or has declined. Yet transit federations showed much better perfomance than did public transit in general. In terms of costs and revenues, no public transit organization in Germany is able to break even; deficits vary between 42% and 55%. The author concludes, however, that hidden subsidies for automobile traffic are far higher, because of environmental damage and the high social cost of traffic accidents.