A ‘sustainability window’ of urban form

With global environmental change and the rise of global megacities, environmental and social externalities of urban systems, and especially of urban form, become increasingly prevalent. The question of optimal urban form has been debated and investigated by different disciplines in numerous contexts, including those of transport costs, land consumption and congestion. Here we elucidate theoretically how urban form and the urban transport system systematically modifies sustainability concerns, such as greenhouse gas emissions, local air pollution and congestion. We illustrate our analytical considerations with empirical analysis. Denser urban form would almost unambiguously mitigate climate change, but it would also lead to undesired effects, such as a higher proportion of urban dwellers affected by air pollution. Our study presents a ‘sustainability window’ by highlighting trade-offs between these sustainability concerns as a function of urban form. Only a combination of transportation policies, infrastructure investments and progressive public finance enables the development of cities that perform well in several sustainability dimensions. We estimate that a residential population density between 50 and 150 persons/ha and a modal share of environmental modes above at least 50% corresponds to the sustainability window of urban form. The parameters of the sustainability window of urban form is subject to policy changes and technological progress.     

Environmental impacts of transformative land use and transport developments in the Greater Beijing Region: Insights from a new dynamic spatial equilibrium model

This paper reports the insights into environmental impacts of the ongoing transformative land use and transport developments in Greater Beijing, from a new suite of dynamic land use, spatial equilibrium and strategic transport models that is calibrated for medium to long term land use and transport predictions. The model tests are focused on urban passenger travel demand and associated emissions within the municipality of Beijing, accounting for Beijing’s land use and transport interactions with Tianjin, Hebei and beyond. The findings suggests that background trends of urbanization, economic growth and income rises will continue to be very powerful drivers for urban passenger travel demand across all main modes of transport beyond 2030. In order to achieve the dual policy aims for a moderately affluent and equitable nation and reducing the absolute levels of urban transport emissions by 2030, road charging and careful micro-level coordination between land use, built form and public transport provision may need to be considered together for policy implementation in the near future.     

A bi-objective bi-level signal control policy for transport of hazardous materials in urban road networks

A bi-objective bi-level signal control optimization for hazardous material (hazmat) transport is considered to assess trade-offs between travel cost and environment impacts such as public risk exposure. A least maxi-sum risk model with explicit signal delay is presented to determine generalized travel cost for hazmat carriers. Since the bi-level signal control problem is generally a non-convex program, a bundle method using generalized gradients is proposed. A bounding strategy is developed to stabilize solutions of the bi-level program and reduce relative gaps between iterations. Numerical comparisons are made with other risk-averse models. The results indicate that the proposed bi-objective bi-level model becomes even amiable to signal control policy makers since provides flexible solutions whilst is acceptable to carriers since takes account of travel delay at signal-controlled junctions. Moreover, the trade-offs between public risk and generalized travel costs are empirically investigated among different risk models with a variety of weights. As a result, the proposed model consistently exhibits highly considerable advantage on mitigation of public risk whilst incurred less cost loss as compared to other alternatives.     

Finding a balance: companies,seafarers and family life

Separation from partner and family has been found to be one of the most significant causes of stress for seafarers, with separation from the family one of the most important ‘stress’ factors influencing a decision to reduce planned sea service. Drawing on in-depth interviews with seafarers' partners in the UK, China and India, this paper focuses on the impact of seafaring on family life, with particular attention given to the effects of differing conditions of service and the range of company support available to seafarers and their partners. The paper concludes that the negative consequences of seafaring can be minimized by such policies as shorter trips, continuous employment (rather than employment by voyage) and opportunities for partners and families to sail. Whilst these measures may have financial costs, these can be off-set by improved retention of seafarers and the avoidance of stress-related illnesses. Indeed, at a time when there is a projected shortfall of well-trained seafarers, such steps may be sound company policy     

A decision support approach to the computerisation of some operational decision problems in community transport

Community Transport (CT) in the UK operates a diverse range of services, and organisations are computerising management and operational functions. This paper describes the approach which has been taken to computerising four operational decision making functions.

The paper considers models of human decision making and problem solving, with particular reference to an information processing view of cognitive activity and to perception and memory. The design of decision support systems is also discussed.

Four decision problems are considered. For each, the paper considers how people tackle the problem, how computers can be used to tackle it and the approach which has been adopted.

For allocating trips to vehicles using a diary, the approach has been to provide a representation on screen of a manual diary. For vehicle brokerage, vehicles are presented to the operator allocating a booking in an order based on the Sequence Number, an index of how ‘difficult to book’ a vehicle is, and the distance of the vehicle's base from the start point of the trip. For the sorting of passenger pick‐ups into an efficient tour, traditional solutions to the travelling salesperson problem have been rejected in favour of a solution using spacefilling curves. Finally, for allocating dial‐a‐ride passenger trips to vehicle shifts an approach has been chosen which presents the operator with appropriate information rather than attempting to automate the scheduling.

The paper concludes that the approach to the diary has been successful and accepted by operators, although the similar approach to the dial‐a‐ride scheduling has not, as the system has not yet been able to replace manual scheduling aids. The facility to order passenger pick‐ups is little used by operators. Finally, it is suggested that the vehicle brokerage problem may be an appropriate use of fuzzy logic.     

城市轨道交通行车配线冗余设计研究

结合配线设置原则与依据、典型城市已运营线路配线布置和故障情况,从辅助配线布置形式、救援方式等角度分析配线设置与故障发生的关系并反思配线设计的不足,提出后续线路配线设计中应坚持运营功能为主的原则,并给出提高配线冗余设计的相关建议。     

Route structures in air transportation—the situation in the federal republic of Germany

This paper deals with route structures in air transportation in general and describes the derivation of such structures. Based on an extensive analysis of scheduled air traffic in Germany, an overview of the situation in domestic and international air travel is given. In particular, relationships were found which permit—in connection with a number of influencing factors—to derive from the present situation route structures, which are also valid for a future year.

This approach was used for the assignment of origin‐destination‐passenger flows to air network routes in a forecast of demand and services in commercial air transportation of the Federal Republic of Germany for the year 1995.     

Stated choices and benefit estimates in the context of traffic calming schemes: Utility maximization,regret minimization,or both?

This paper proposes a discrete mixture model which assigns individuals, up to a probability, to either a class of random utility (RU) maximizers or a class of random regret (RR) minimizers, on the basis of their sequence of observed choices. Our proposed model advances the state of the art of RU–RR mixture models by (i) adding and simultaneously estimating a membership model which predicts the probability of belonging to a RU or RR class; (ii) adding a layer of random taste heterogeneity within each behavioural class; and (iii) deriving a welfare measure associated with the RU–RR mixture model and consistent with referendum-voting, which is the adequate mechanism of provision for such local public goods. The context of our empirical application is a stated choice experiment concerning traffic calming schemes. We find that the random parameter RU–RR mixture model not only outperforms its fixed coefficient counterpart in terms of fit—as expected—but also in terms of plausibility of membership determinants of behavioural class. In line with psychological theories of regret, we find that, compared to respondents who are familiar with the choice context (i.e. the traffic calming scheme), unfamiliar respondents are more likely to be regret minimizers than utility maximizers.     

Experienced travel time prediction for congested freeways

Travel time is an important performance measure for transportation systems, and dissemination of travel time information can help travelers make reliable travel decisions such as route choice or departure time. Since the traffic data collected in real time reflects the past or current conditions on the roadway, a predictive travel time methodology should be used to obtain the information to be disseminated. However, an important part of the literature either uses instantaneous travel time assumption, and sums the travel time of roadway segments at the starting time of the trip, or uses statistical forecasting algorithms to predict the future travel time. This study benefits from the available traffic flow fundamentals (e.g. shockwave analysis and bottleneck identification), and makes use of both historical and real time traffic information to provide travel time prediction. The methodological framework of this approach sequentially includes a bottleneck identification algorithm, clustering of traffic data in traffic regimes with similar characteristics, development of stochastic congestion maps for clustered data and an online congestion search algorithm, which combines historical data analysis and real-time data to predict experienced travel times at the starting time of the trip. The experimental results based on the loop detector data on Californian freeways indicate that the proposed method provides promising travel time predictions under varying traffic conditions.     

Stop-and-go traffic analysis: Theoretical properties,environmental impacts and oscillation mitigation

This study aims (i) to analyze theoretical properties of a recently proposed describing-function (DF) based approach (Li and Ouyang, 2011; Li et al., 2012) for traffic oscillation quantification, (ii) to adapt it for estimating fuel consumption and emission from traffic oscillation and (iii) to explore vehicle control strategies of smoothing traffic with advanced technologies. The DF approach was developed to predict traffic oscillation propagation across a platoon of vehicles following each other by a nonlinear car-following law with only the leading vehicle’s input. We first simplify the DF approach and prove a set of properties (e.g., existence and uniqueness of its solution) that assure its prediction is always consistent with observed traffic oscillation patterns. Then we integrate the DF approach with existing estimation models of fuel consumption and emission to analytically predict environmental impacts (i.e., unit-distance fuel consumption and emission) from traffic oscillation. The prediction results by the DF approach are validated with both computer simulation and field measurements. Further, we explore how to utilize advantageous features of emerging sensing, communication and control technologies, such as fast response and information sharing, to smooth traffic oscillation and reduce its environmental impacts. We extend the studied car-following law to incorporate these features and apply the DF approach to demonstrate how these features can help dampen the growth of oscillation and environmental impact measurements. For information sharing, we convert the corresponding extended car-following law into a new fixed point problem and propose a simple bisecting based algorithm to efficiently solve it. Numerical experiments show that these new car-following control strategies can effectively suppress development of oscillation amplitude and consequently mitigate fuel consumption and emission.