基于遗传算法优化的小波神经网络对船舶受扰力及力矩建模预报

首先构造小波神经网络,建立船舶横向和纵向运动模型及其运动受扰力模型,采用小波神经网络对船舶受扰力建模预报,并用遗传算法对其进行优化,对预报结果进行分析比较,给出超前5秒、15秒的船舶运动受扰力与力矩预报结果.     

光滑质点流体动力学(SPH)及其算法特性

基于Lagrange观点的无网格方法计算是建立在一群可移动的自适应性的质点基础之上,对特大变形区域和自由表面的捕捉有着较高的精度.光滑质点流体动力学(SPH)是无网格方法的一种,本文阐述其理论基础和计算方法,主要包括:SPH的基本概念、核近似和粒子近似的基本原理,核函数的构造方法、SPH形式的流体运动方程、边界处理方法和数值算例等多方面内容.研究工作在了解SPH方法的理论特点和潜在优势的同时,也为相关问题的深入研究和改进奠定了理论和算法基础.     

跨坐式单轨交通预应力钢筋混凝土轨道梁动力性能试验与分析

对重庆跨坐式单轨交通的预应力钢筋混凝土轨道梁、墩体结构进行了动力试验,测试其动力特性及在不同行车速度下的动力响应.测试及分析结果表明,预应力钢筋混凝土轨道梁结构实测自振特性与理论计算结果基本相符;轨道梁结构具有较好的竖向刚度和结构强度;单轨车辆以不同速度通过桥梁时,试验梁横向基频、横向加速度等横向振动性能与<铁路桥梁检定规范>的要求有一定差异;运行单轨车辆对轨道梁结构有一定的冲击作用,但不显著;墩体结构横向动力性能良好,满足限值要求.     

上海铁路西站南广场综合交通枢纽规划与设计

基于铁路上海西站枢纽的最新规划方案,在充分虑上海西站改建、城市轨道交通建设、城市综合交通枢纽成及上海西站南广场地块开发的背景下,从地下和地上空利用、设施布局、交通组织等角度,提出了一种新的上海西南广场综合交通枢纽的一体化规划设计方案.其设计理是:以轨道交通为核心,各种交通方式之间无缝衔接、复合同发展的铁路车站站前广场.     

开发国产300 km/h以上速度动车组的设想

讨论了CRH系列动车组消化吸收再创新的总体目标与主要思路。提出了国产300km/h以上速度动车组的技术创新总体方案的初步设想和技术路线,以及需要研究解决和完成的主要任务、具体内容与所要达到的技术指标。     

Development of an LIF image processing technique for measuring drop sizes in a pre-swirl spray

Depth of field effects in laser sheet imaging were considered for droplet sizing of a pre-swirl spray. A pre-swirl spray is formed before the hollow-cone type main-swirl spray from a D.I. gasoline injector, and shows transient characteristics with high axial velocity. A microscopic imaging technique was applied to obtain high spatial resolution LIF tomograms of the pre-swirl spray. A 1 mm thick Nd:YAG laser sheet was used as a light source to make the LIF tomograms that were imaged using a high-resolution CCD camera. The droplet sizing of the pre-swirl spray was carried out using an image processing technique. In the image processing procedure, the laser sheet-straddling large-sized droplets were carefully taken into account to remove the errors caused by the depth of field effects from the limited thickness and the energy distribution of the laser sheet. The mean intensity of the individual droplets and the line profile of the LIF signal around the droplet edge were inspected to screen the laser sheet-straddling large-sized droplets. In order to consider the effects of the size-dependent LIF signal intensity, the size-classified or ensemble-averaged mean intensity of the individual droplets was introduced. The mean droplet sizes such as AMD and SMD were calculated using only screened droplets, and they slightly increase before considering the depth of field effects.     

Comparison of HC species from diesel combustion modes and characterization of a heat-up doc formulation

This study summarizes engine speed and load effects on HC species emissions from premixed charge compression ignition (PCI) and conventional diesel combustion, and it evaluates diesel oxidation catalyst (DOC) formulations on a gas flow reactor for the purpose of diesel particulate filter regeneration or lean NO_x trap desulfation. HC emissions are sampled simultaneously by a Tedlar bag for light HC species and by a Tenax TA™ adsorption trap for semi-volatile HC species, and they are analyzed by gas chromatography with a flame ionization detector. The bulk temperature and residence time during combustion are key parameters that are important for understanding the effects of speed and load on engine-out HC emissions. The degree of post-flame oxidation is higher in PCI than in conventional combustion, and it is increased for PCI with a higher speed and load, as indicated by a lower fuel alkanes/THC ratio, a higher alkenes/fuel alkanes ratio, and a higher methane/THC ratio. Ethene and n-undecane are two representative HC species, and they are used as a surrogate mixture in the gas flow reactor to simulate PCI and conventional combustion with in-cylinder post fuel injection. Among the three DOC formulations tested, the catalyst with constituent precious metals of platinum and palladium (PtPd) showed the best light-off performance, followed by PtPd with an addition of cerium dioxide (PtPd+CeO₂), and platinum (Pt), regardless of exhaust compositions. Conventional combustion exhaust composition shows a lower light-off temperature than that of PCI, regardless of catalyst formulation.     

Transient characteristics of emissions during engine start/stop operation employing a conventional gasoline engine for HEV application

In this paper, we investigate the transient characteristics of combustion and emissions during engine start/stop operations in hybrid electric vehicle (HEV) applications. Hydrocarbon (HC) emissions during the initial 2^nd∼9^th cycles are found to be significantly greater when the engine is quickly started under the original engine calibration mode. Lower intake manifold absolute pressure (MAP) was also found to cause larger residual gas dilution and poor combustion, resulting in a higher HC concentration when the cranking speed was increased. The post-catalyst HC concentration was found in the way of initially decrease and then to increase again as the cranking speed was increased. A lowest concentration value was achieved at a cranking speed of 1000 r/min. Engine shut-down by fuel cut-off was shown to produce lower emissions than shut-down by ignition cut-off as one can avoid misfire of the last fuel injection cycle. The fuel deposited during the stop process seems to impact engine restart enrichment mostly during the initial 0.7 s for this engine, whose performance is dominated by the MAP transition characteristic and the time coefficient for fuel vaporization in this time period     

Analysis process of a steering system using a concept model for idle vibration

This paper describes the development of an optimal design process for a steering column system and supporting system. A design guide is proposed at the initial concept stage of the development process to obtain sufficient stiffness of the steering system while reducing the idle vibration sensitivity of the system. Case studies on resonance isolation are summarized, where vibration modes among the systems are separated by applying a vibration mode map at the initial stage of the design process. This study also provides design guidelines for an optimal dynamic damper system using a CAE (computer aided engineering) analysis. The damper FE (finite element) model is added to the vehicle model to analyze the relation between the frequency and the sensitivity of the steering column system. This analysis methodology makes it possible to achieve target performance in the early design stage and reduction of damper tuning activity after the proto car test stage. Through the proposed steering column system development process, a lightweight vehicle with high stiffness is possible prior to the proto build stage. Furthermore, the improved process is expected to contribute to reducing the overall development period and the number of proto car tests necessary to achieve the desired steering system performance.     

基于ADAMS的双横臂独立悬架的优化设计

利用机械系统动力学分析软件ADAMS,建立了带有转向系统的双横臂独立前悬架虚拟样机模型,并在ADAMS/Car模块中对其进行仿真分析.采用优化分析对悬架不合理数据进行优化,进一步改善悬架系统性能,以提高产品开发质量.