轨道交通供电系统功率因数分析及补偿方案研究

研究目的:近年来我国轨道交通建设事业迅猛发展,但功率因数问题一直是困扰轨道交通供电系统的重要问题,常常导致电力部门的高额罚款。为提高功率因数,需对无功补偿方案进行研究。在分析国内城市轨道交通供电系统无功补偿现状的基础上,通过对整个供电系统综合功率因数的分析计算,研究几种无功补偿方案,并最终确定一种新的综合无功补偿方案。研究结论:城市轨道交通线路的无功补偿方案应根据自身供电系统的实际情况,并通过综合功率因数分析计算或实测分析,来综合考虑采用高压、低压侧相结合的无功补偿方案;在条件允许时,建议采用主所设SVG+各车站变电所0.4 kV侧设APF的综合补偿方案。     

基于期权理论的铁路货运定价模型

为了规避铁路运输企业和协议客户在市场价格波动情况下所面临的风险,在铁路货运的定价过程中引入期权的概念,利用二叉树模型为期权定价,在此基础上构建了基于铁路运输企业和协议客户收益最大条件下的铁路货运定价模型。研究结果表明:通过铁路运输企业和协议客户的最优定价决策可以求得铁路运输企业制定的协议价格和协议客户的期权购买量;协议价格与现货市场价格正相关,与铁路运输企业的长期准备成本正相关、短期准备成本负相关;随着期权价格和期权执行价格的升高,协议客户在契约市场所购买的期权数量逐渐减少。     

混合动力--未来城市公交的明星动力

本文阐述了目前国内外混合动力总成常用的几种方案,介绍了一种适合康明斯发动机的混合动力方案,展望了该动力总成的开发前景。     

城市公交客车发展趋势

本文从未来十年城市社会经济和文化发展的角度分析了公交客车发展的趋势:即动力设计环保化、形体设计大型化、技术配置多样化、性能选择人本化、信息沟通智能化、外观设计艺术化、操作系统自动化、应急设置可靠化、总成寿命同步缩短化、车身结构轻型化。     

Introduction: Habitual travel choice

In this introduction to the special issue on habitual travel choice, we provide a brief account of the role of habit in travel behaviour, discuss more generally what habitual choice is, and briefly review the issues addressed in the solicited papers. These issues include how habitual travel behaviour should be measured, how to model the learning process that makes travel choice habitual, and how to break and replace car-use habits.     

CM模式在我国城市轨道交通项目管理中的应用

为探索城市轨道交通建设项目管理模式,本文在揭示了目前城市轨道工程特点及存在主要矛盾的基础上,介绍了新型CM建设管理模式的特征和优点;分析了在我国城市轨道交通建设领域采用CM模式的必要性和可行性,提出了推行CM模式的相应方案和步骤。     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.     

Experimental evaluation of Heavy Duty Vehicle speed patterns in urban and port areas and estimation of their fuel consumption and exhaust emissions

Exhaust emissions and fuel consumption of Heavy Duty Vehicles (HDVs) in urban and port areas were evaluated through a dedicated investigation. The HDV fleet composition and traffic driving from highways to the maritime port of Genoa and crossing the city were analysed. Typical urban trips linking highway exits to port gates and HDV mission profiles within the port area were defined. A validation was performed through on-board instrumentation to record HDV instantaneous speeds in urban and port zones. A statistical procedure enabled the building-up of representative speed patterns. High contrasts and specific driving conditions were observed in the port area. Representative speed profiles were then used to simulate fuel consumption and emissions for HDVs, using the Passenger car and Heavy duty Emission Model (PHEM). Complementary estimations were derived from Copert and HBEFA methodologies, allowing the comparison of different calculation approaches and scales. Finally, PHEM was implemented to assess the performances of EGR or SCR systems for NO_X reduction in urban driving and at very low speeds.The method and results of the investigation are presented. Fuel consumption and pollutant emission estimation through different methodologies are discussed, as well as the necessity of characterizing very local driving conditions for appropriate assessment.     

Hierarchal assessment of noise pollution in urban areas – A case study

Noise pollution in urban areas has many harmful effects on the citizens. There are varieties of noise generation sources of which the traffic noise could be a major source. The point which is perhaps less noticed is that sound level is not the only parameter to indicate the extent and intensity of noise pollution. Situation of urban land uses, distribution of population centers and types of passages can deeply affect the concern on this environmental issue but not with a similar ratio. This article presents an overlaying technique to define noise prone areas using all different factors involved. A case study was carried out in the District 14 of Tehran Metropolitan City where there are busy streets and highways. For this purpose, the share of each criterion in noise pollution intensity was determined using Analytical Hierarchy Process (AHP). Afterwards, the map layers were overlaid based upon the relative importance of the criteria to get the final map on which the noise prone areas are specified. The developed method could be used as a tool for indirect estimation of noise pollution by which instead of direct measurement of the equivalent sound level, it would be possible to predict noise susceptible areas considering the most important influential factors.     

The desulphurisation of shipping: Past,present and the future under a global cap

As from January 2020, the International Maritime Organization (IMO) is implementing a global 0.5% limit on the sulphur content of fuel, commonly known as the global sulphur cap. This limit is the latest policy in the efforts to reduce sulphur emissions from shipping, following the designation of emission control areas (ECAs) and other regional regulations. In this paper, a literature review is conducted of academic studies that have dealt with issues relating to the reduction of maritime sulphur emissions. Various recurring research themes are identified, spanning the areas of operations research, maritime economics and transport policy. The effects and implications of available compliance options are then analyzed from the perspectives of ship operators, shippers and consumers. Using lessons learned from the enforcement of ECA regulations, this is followed by an appraisal of various potential issues related to the enforcement of these new global regulations. It is found that a homogeneous enforcement regime is required to ensure a level playing field amongst ship operators and that the global sulphur cap may lead to serious market distortion, due to the potential short term rise of fuel prices. The paper concludes with a set of recommendations for future research on sulphur emissions from shipping in the aftermath of the global cap and, looking forward, to its relationship to the IMO strategy on the reduction of greenhouse gas (GHG) shipping emissions.