多模块连接半潜式平台稳性对比分析

为开发我国海洋丰富的渔业、油气和旅游资源,可以在指定海域布设超大型浮式结构物,作为综合保障基地,提供船舶停靠、人员居住、渔业加工、油气开发、环境监测、飞机起降等多种功能.考虑到建造、运输等因素,超大型浮式结构物一般由多个相同或相似模块连接组成.本文基于一型半潜式平台模块,分别开展单、双、三模块的稳性分析,并对其稳性分析结果进行对比分析,探讨模块数量对平台稳性的影响,为超大型浮式结构物的后续设计与运营提供参考.     

沿海半潜观光船破舱稳性的计算

本文就客船破舱稳性计算中浮体等相关问题作了简要介绍。     

Spar基础浮式风机系泊系统全耦合分析

本文以OC3 Hywind Spar基础浮式风机为研究对象,采用先进的空气动力-水动力耦合时域分析方法,针对其在中国南海某海域风浪流共同作用下,系泊系统、浮式基础运动以及风机与塔桶载荷响应进行分析。对比了定常风与湍流风模型对浮式风机系泊系统、整体运动响应以及风机载荷的影响。计算结果表明：相比于湍流风,采用定常风进行浮式风机系泊系统分析将得到偏于危险的结果,同时浮式风机运动响应与风机载荷结果偏小。本文建议在系泊系统初始设计阶段采用定常风方法进行设计,在系泊分析阶段采用湍流风进行分析,以保证浮式风机长期服役安全。     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Effects of Overloading on the Mechanical Properties of Tunnel Structures in the Silty Ground --A Case Study of Sutong River-crossing GIL Utility Tunnel北大核心CSCD

Based on the Sutong GIL utility tunnel project, which is constructed by the shield machine under the river, and as for the overloading problem at the river bank slope during operating period, the refined threedimensional finite element model was established to study the deformation and cracking characteristics of the tunnel segment structure under different forms of overloading. The evolution laws of section convergence, joint opening and structural stress were analyzed, and the structure damage mechanisms were revealed under conditions of large area loading and local loading. The surface-surcharge control standard was proposed. For the big diameter shield tunneling crossing the silty clay, the research results show that: (1) the deformation failure process is divided into three stages under large area loading condition, taking the design load and compressive yield of rebars inside haunch as the critical points respectively. The first stage is characterized by the elastic stress, the second stage is in plastic state with fracture, and the third stage is accelerating deformation and instability stage. The vertical convergence is 110.5 mm with no opening of joints when rebars are yielded; (2)the deformation failure process under local loading condition is also divided into elasticity, plasticity and instability stages, taking the design load and tensile yield of rebars outside haunch as the critical points respectively. The vertical convergence is 152.6 mm with joint opening of 4.36 mm; (3) the early-warning values of additional stress on the ground under conditions of large area loading and local loading are 110 kPa and 70 kPa respectively. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

An integrated methodology for the design of mooring systems and risers

Traditionally, the design of mooring lines and risers of floating production systems (FPS) has been performed separately, by different teams, employing uncoupled analysis tools that do not consider the nonlinear interaction between the platform hull and the mooring lines and risers. Design processes have been focused on fulfilling the design criteria of the respective component (mooring/riser) alone, with few or no consideration to the other component, and little interaction between the design teams. Nowadays the importance of employing analysis tools based on coupled formulations is widely recognized, and analysis strategies have been proposed to consider feedback between mooring lines and risers within their respective design processes.In this context, this work details a proposal of one single and fully integrated design methodology for mooring systems and risers for deep-water FPS. In this methodology, the design stages of both risers and mooring lines are incorporated in a single spiral, allowing the full interaction of different teams; mooring design implicitly considers the riser integrity, and vice-versa, leading to gains in efficiency and cost reduction.Different analysis strategies are employed, taking advantage of uncoupled and coupled numerical models. The models generated at the initial/intermediate design stages can be reused in subsequent stages: simpler models are used in the initial stages, and more refined models are gradually introduced, to reach an ideal balance between computational cost and accuracy of results. In the advanced stages, the exchange of information between mooring/riser also allows the definition of criteria for the selection of governing/critical loading cases to be revised and verified in detail. This leads to the reduction of the original loading case matrix, allowing a feasible use of time-consuming fully coupled analysis.Results of a case study illustrating the application of some of the main processes of the methodology are included.     

大容积气袋数值模拟方法的研究

气袋缓冲技术已广泛用于工业产品的缓冲保护,其数值模拟技术是设计和验证过程中的一个重要手段。本文针对实际工业应用中的某大容积缓冲气袋,通过数值模拟与试验对比,获得了与实际缓冲特性较为一致的气袋模型。通过对模拟结果的研究,讨论了模拟中3种主要控制参数对缓冲特性的影响,得到了一种适合于工业应用的设计方法。     

大体积承台混凝土施工

文章以新寨河特大桥主墩承台施工为例,介绍了大体积混凝土施工的质量控制要点、施工工艺及质量保障措施,并重点讲述了大体积混凝土在施工中,如何预防因温度应力而引起混凝土开裂的温度监测措施。     

武汉阳逻长江公路大桥前期设计工作概况

介绍近期准备开工建设的武汉阳逻长江公路大桥的工程建设方案和工程规模。     

汕头（石）石大桥钢桥面SMA铺装层施工质量管理与检测

重点介绍汕头石大桥钢桥面改性沥青 SMA铺装层的施工工艺与质量管理 ,说明质量管理与检测在保证铺装工程质量中所起的关键作用