基于无线数据采集技术的地铁车辆地面试验在线监测系统

地铁车辆地面试验是地铁调试的关键步骤,为了提高试验效率和可靠性,必须对其进行在线运行状态监测。文章针对地铁车辆分布式采集系统在数据传输上存在的困难,提出了一种基于无线数据采集技术的地铁车辆地面试验在线监测方案,该系统具有数据存储分析、状态监测、故障诊断的功能,可实现大范围内的地铁车辆运行状态的实时监控。     

高速公路通信技术发展趋势

我国高速公路通信建设发展速度较快,通信网技术水平起点较高,光纤数字传输系统从早期的PDH准同步数字传输模式发展到如今的SDH同步数字传输模式,只用了短短几年的时间.随着我国高速公路建设突飞猛进的发展,各省高速公路联网收费、集中监控等工作正在实施之中,对通信系统提出了更高的要求.     

基于GPS／GPRS／GIS的实时车辆监控指挥系统设计及实现

本给出了一种基于GPS／GPRS／GIS的实时车辆监控指挥系统的实现方案。中分析了GPRS、GIS、GPS技术的特点及结合的方法，着重阐述了实验系统结构和车载设备的软硬件设计。该系统综合集成了车辆定位、中心监控、指挥调度、语音数据双向通信等功能，满足城市交通一体化系统实时数据采集、传输、处理与轴助决策等的需要。     

地铁车辆电气数据采集诊断及无线传输方法研究

文章介绍了地铁车辆数据采集诊断及无线传输方法,并结合地铁车辆的调试工艺文件设计了地铁车辆电气数据采集方法、自动判定方法及无线传输方式。采用该系统可自动判定每个调试步骤的操作和结果,减少人为误判行为,大大提高地铁车辆的调试效率,文章最后在地铁车辆静态调试中进行了相关模拟测试,验证了该系统的可行性。     

A high-performance low cost inverse integer transform architecture for AVS video standard

A high-performance, low cost inverse integer transform architecture for advanced video standard (AVS) video coding standard was presented. An 8×8 inverse integer transform is required in AVS video system which is compute-intensive. A hardware transform is inevitable to compute the transform for the real-time ap-plication. Compared with the 4×4 transform for H.264/AVC, the 8×8 integer transform is much more complex and the coefficient in the inverse transform matrix Ts is not inerratic as that in H.264/AVC. Dividing the Ts into matrix S8 and R8, the proposed architecture is implemented with the adders and the specific CSA-trees instead of multipliers, which are area and time consuming. The architecture obtains the data processing rate up to 8 pixels per-cycle at a low cost of area. Synthesized to TSMC 0.18 μm COMS process, the architecture attains the operating frequency of 300 MHz at cost of 34 252 gates with a 2-stage pipeline scheme. A reusable scheme is also introduced for the area optimization, which results in the operating frequency of 143 MHz at cost of only 19 758 gates.     

A secure trust model for P2P systems based on trusted computing

Trust is one of the most important security requirements in the design and implementation of peer-to-peer （P2P） systems. In an environment where peers＇ identity privacy is important, it may conflict with trustworthiness that is based on the knowledge related to the peer＇s identity, while identity privacy is usually achieved by hiding such knowledge. A trust model based on trusted computing （TC） technology was proposed to enhance the identity privacy of peers during the trustworthiness evaluation process between peers from different groups. The simulation results show that, the model can be implemented in an efficient way, and when the degree of anonymity within group （DAWG） is up to 0.6 and the percentage of malicious peers is up to 70%7 the service selection failure rate is less than 0.15.     

Intelligent drug delivery system using UML diagrams analysis

A novel intelligent drug delivery system potential for the more effective therapy of the diabeticswas proposed, and the composition of system was analyzed. Based on the design of micro-electro-mechanicalsystems (MEMS), an iterative modeling process was introduced. Unified modeling language (UML) was em-ployed to describe the function requirement, and different diagrams were built up to explore the static model,the dynamic model and the employment model. The mapping analysis of different diagrams can simply verifythe consistency and completeness of the system model.     

地铁通信信号供电系统零地电压的形成机理与技术措施

引言 置随着城市交通的日益拥堵，快速公交建设成了各大城市共同考虑的重点，作为其骨干．地铁建设在当前愈发重要，目前国内上海、北京、昆明等大中城市都在加速建设。地铁所处环境较为特殊．一旦遭遇安全事故，很难逃生，而通信信号系统通过网络、自动化等技术．能够及时收集各种信息．更好地用于指挥地铁运行、联络、管理，进而保证其安全性。UPS电源在通信信号系统中重要性凸显，主要供电异常时及时发挥作用。电源系统的零地电压对信号、通信和信息传输都有重大影响．需有效控制。     

点式应答器传输模块测试技术

点式应答器传输模块(balise transmission module, BTM)是中国列车控制系统(CTCS)车载子系统必不可少的设备,可实现车地间信息的传输。文章针对实际车地传输中偶尔会有"丢点"现象,即无法收到地面应答器的报文信号的问题,提出设计开发一套应答器车载设备测试系统,阐述了该系统的原理和软、硬件架构。试验表明,该测试系统较好地实现了对应答器传输过程中上下链路关键参数的考核。     

无接触网有轨电车车地无线传输系统研究

针对无接触网有轨电车设计了一套基于大数据分析技术及物联网技术的车地无线传输系统。介绍了该系统的系统架构、系统功能及设计要点。该系统能够显著提升列车车地数据传输的安全性、高效性及便捷性,提高了无接触网有轨电车车地传输技术和智能化应用水平。同时,该系统具有良好的可扩展性,可满足各类城市轨道交通车辆车载设备调试、维护以及数据传输的应用需求。