异步牵引电机磁场定向控制解耦算法的研究

针对异步牵引电机,研究了磁场定向控制系统的电压解耦问题。就一种新的解耦算法,从动态响应、抗参数变化、弱磁区转矩响应等方面,借助理论分析和计算机仿真,与现有的解耦算法进行比较。研究表明:该方法更适合于大功率牵引电机的解耦计算。     

城市高架公路新型声屏障研究

在分析城市交通噪声主要特征的基础上 ,探讨声屏障的声学设计、结构设计及强度设计方法 ,介绍城市高架公路新型声屏障的试验室测试结果和应用情况。测试和应用结果表明 ,这种新型声屏障是城市高架公路控制噪声的有效设施。     

多源激励水下复杂壳体结构振动与辐射声场试验研究

设计了一个接近实际情况的多舱段复杂壳体模型,安装小型机械设备,分别进行了单台设备激励与多台设备同时激励的水下复杂壳体振动与声辐射试验;试验结果表明,多源激励下水中复杂壳体的结构响应、辐射声场近似为单源激励下结构响应、辐射声场的非相干叠加.然后从结构声辐射理论上推导了激励源与结构响应、辐射声场之间的传递关系,并以两个源激励为例分析了非相干叠加引起的误差,从而解释了多源激励下结构响应、辐射声场近似为单源激励下结构响应、辐射声场非相干叠加的合理性.这些研究表明,非相干叠加方法可推广应用于水下复杂壳体在多源激励情况下的振动与声场计算,对指导工程设计具有重要价值.     

不同轨道结构减振效果测试分析

在地铁运营期间,通过对采用浮置板、弹性支承块及弹性扣件轨道的轨道结构和隧道壁的振动测试,在时域和频域内,分析了不同地铁轨道结构的减振效果,为今后地铁轨道结构设计选型提供试验依据。     

Development of an LIF image processing technique for measuring drop sizes in a pre-swirl spray

Depth of field effects in laser sheet imaging were considered for droplet sizing of a pre-swirl spray. A pre-swirl spray is formed before the hollow-cone type main-swirl spray from a D.I. gasoline injector, and shows transient characteristics with high axial velocity. A microscopic imaging technique was applied to obtain high spatial resolution LIF tomograms of the pre-swirl spray. A 1 mm thick Nd:YAG laser sheet was used as a light source to make the LIF tomograms that were imaged using a high-resolution CCD camera. The droplet sizing of the pre-swirl spray was carried out using an image processing technique. In the image processing procedure, the laser sheet-straddling large-sized droplets were carefully taken into account to remove the errors caused by the depth of field effects from the limited thickness and the energy distribution of the laser sheet. The mean intensity of the individual droplets and the line profile of the LIF signal around the droplet edge were inspected to screen the laser sheet-straddling large-sized droplets. In order to consider the effects of the size-dependent LIF signal intensity, the size-classified or ensemble-averaged mean intensity of the individual droplets was introduced. The mean droplet sizes such as AMD and SMD were calculated using only screened droplets, and they slightly increase before considering the depth of field effects.     

Wind pressure distribution and wind-induced dynamic response for spatial groined latticed vaults

The wind pressure distribution and wind-induced vibration responses of long-span spatial groined latticed vaults (SGLVs) were numerically simulated, which always are ones of the most important problems in the structural wind resistance design. Incompressible visco-fluid model was introduced, and the standard k-εtwo equation model and semi-implicit method for pressure linked equation (SIMPLE) were used to describe the flow turbulence. Furthermore, the structural dynamic equation was set up, which is solved by Newmark-β method. And several sort of wind-induced vibration coefficients such as the wind-induced vibration coefficient corresponding to the nodal displacement responses and wind loads were suggested. In the numerical simulation where the SGLV consisting of the cylindrical sectors with different curved surface was chosen as the example,the influence on the relative wind pressure distribution and structural wind-induced vibration responses of the closed or open SGLV caused by such parameters as the number of cylindrical sectors, structural curvature and the ratio of rise to span was investigated. Finally, some useful conclusions on the local wind pressure distribution on the structural surface and the wind-induced vibration coefficients of SGLV were developed.     

简易机场道面结构的疲劳特性试验

为了分析简易机场的合理道面结构,依托陕西西安、湖南耒阳的室内外试验段,利用直径30cm刚性承载板模拟机轮荷载圆,使用反力架、千斤顶及疲劳试验机,通过人工和机械定点重复加载模拟飞机通行,研究了薄层沥青混凝土面层 水泥稳定细粒土基(垫)层道面结构在重复荷载作用下的疲劳特性。试验结果表明:推荐道面结构早期承载能力较高,在60d龄期内,整体回弹模量为200～300MPa,弯沉小于1mm;此时道面可承受飞机荷载几万至十几万次的起降通行而不破坏,并保持良好的使用性能;推荐道面结构的疲劳特性可以满足简易机场的应急使用需求。     

桥、隧、路、堤组合结构应用技术

为解决受周边既有环境影响下隧道出入口的展线难题,依托长沙市营盘路隧道工程实例开展系统性研究。结合桥、隧相连工程的实际特点,提出一种桥、隧、路、堤组合结构方案,并对该方案实施的可行性进行详细分析及阐述。通过运用Plaxis2D有限元软件对组合方案进行受力计算,结果表明: 护壁墙与隧道结构在位移的变化上基本达到协同变形,所设置的联系横、纵梁结构能有效地将护壁墙与隧道结构连接成整体,起到整体受力的作用。同时,在工程施工期间进行现场监测,结果显示： 大堤周边地表累计最大沉降量为15.44 mm,水平最大位移为6.72 mm,实际监测量均小于数值模拟的最大沉降量（21.34 mm）和最大水平位移（8.77 mm）。模拟结果对施工起到一定的指导作用,组合方案在满足承载力要求的前提下,最大限度地保留既有原始地貌,解决了特殊条件下的交通功能问题。     

Field measurements of the evolution of wheel wear and vehicle dynamics for high-speed trains

This investigation demonstrates the wheel wear evolution and related vehicle dynamics of high-speed trains with an operating distance (OD) of around two million kilometres. A long-term experimental test lasting two years was conducted to record the wheel profiles and structural vibrations of various trainsets. The wheel wear, namely the profile shape, worn distribution and wheelset conicity, is investigated for several continuous reprofiling cycles. Typical results are illustrated for the stability analysis, and the ride quality is examined with increasing OD. In addition, the vibration transition characteristics between suspensions are investigated in both the time and frequency domains. The experiments show that the dominant wear concentrates on the nominal rolling radius, and the wear rate increases with OD because of the surface softening resulting from the loss of wheel material. The vibration of structural components is aggravated by the increase of the equivalent conicity of the wheelset, which rises approximately linearly with the wheel wear and OD. High-frequency vibrations arise in the bogie and car body related to the track arrangement and wheel out-of-roundness, causing the ride comfort to worsen significantly. Additionally, the system vibration characteristics are strongly dependent on the atmospheric temperature. Summaries and conclusions are obtained regarding the wheel wear and related vehicle dynamics of high-speed trains over long operating times and distances.     

郑万高铁隧道大型机械化配套全断面法施工围岩-支护结构相互作用力学特性研究

为研究郑万高铁大型机械化配套全断面法施工围岩-支护结构相互作用力学特性,依托郑万高铁隧道现场实测数据,确定台阶法和大型机械化配套全断面法2种工法施工的围岩压力分布特征,并采用数值模拟的方法建立围岩-支护结构有限元模型,分析2种工法对围岩压力和结构内力的影响规律。研究结果表明： 1)台阶法多次施工扰动易导致支护结构和围岩之间产生空隙而发生脱空,大型机械化配套全断面法施工对围岩扰动次数少,初期支护快速封闭成环,可保证初期支护及围岩之间良好的密贴性; 2)在软弱围岩中,采用大型机械化配套全断面法施工比台阶法更有利于改善结构受力,减缓结构内部偏心受压的程度,能有效发挥拱形隧道结构承载力; 3)大型机械化配套全断面法在软弱围岩快速施工、控制支护结构变形、保证支护结构受力安全等方面具有综合优势。