基于鲁棒性的空调自控系统设计

分析了空调自控系统的主要特性,并介绍了一种基于组合自校正控制策略的自适应控制算法,同时采取一些解决工程实际问题的辅助措施,以增强系统的抗干扰能力和对未建模动态、时变参数的鲁棒性.     

舰用柴油机预混合等压燃烧的数值模拟及试验研究

运用CFD软件Star-cd对一台舰用高速大功率柴油机实现预混合近似等压燃烧进行了缸内喷雾及燃烧过程的模拟计算,主要考察了不同压缩比的燃烧室型线,以及喷油器喷孔参数对柴油机性能、缸内温度场、速度场和NO排放的分布的影响.经过多方案的计算分析,确定了高速大功率柴油机实现预混合近似等压燃烧的压缩比和喷孔参数,并能在提高柴油机性能的同时降低排放.通过对最优方案的台架试验,在直喷式柴油机上实现了预混合等压燃烧要求的放热率.     

Ni—P—SiC化学复合镀层中SiC均匀共析的最佳参数研究

研究了镀复条件及工艺配方对 N-P-SiC 化学复合镀层中 SiC 均匀共析的影响.结果表明,Nj-P 合金基体中 SiC 微粒子均匀共析的最佳条件是:温度87±1℃,搅拌速度600r/min·K,pH=4.8,SiC 平均粒径 D_p=3.5μm,SiC 的添加量8g/L,析出速度12～14μm/h.本文还测定了镀层的显微硬度及磨损量,并用扫描电镜观察了磨损前后的表面形貌和结构.     

Railway wheel-flat and rail surface defect modelling and analysis by time–frequency techniques

Damage to the surface of railway wheels and rails commonly occurs in most railways. If not detected, it can result in the rapid deterioration and possible failure of rolling stock and infrastructure components causing higher maintenance costs. This paper presents an investigation into the modelling and simulation of wheel-flat and rail surface defects. A simplified mathematical model was developed and a series of experiments were carried out on a roller rig. The time–frequency analysis is a useful tool for identifying the content of a signal in the frequency domain without losing information about its time domain characteristics. Because of this, it is widely used for dynamic system analysis and condition monitoring and has been used in this paper for the detection of wheel flats and rail surface defects. Three commonly used time–frequency analysis techniques: Short-Time Fourier Transform, Wigner–Ville transform and wavelet transform were investigated in this work.     

混合交通流参数之间关系模型标定

提出了混合交通流参数之间关系模型的标定和超车换道率的计算方法,采用广深高速公路、广佛高速公路和沪宁高速公路的实测数据对模型进行了验证,并计算了各数据点的超车换道率.结果表明,流量、密度数据的相关系数都接近1,超车换道率介于-1和1之间.     

基于动态模量试验的沥青混合料老化性能研究

为研究沥青混合料老化过程中的动态特性,对在不同温度条件下经受不同频率的动荷载的沥青混合料在不同老化期的动态模量进行试验,分析温度和荷载频率对动态模量及相位角的影响,采用车辙因子对沥青混合料的高温稳定性进行评价,并根据时间温度等效原理建立了不同老化程度的动态模量主曲线。研究结果表明：老化沥青混合料的动态模量和相位角具有明显的温度和频率依赖性,老化使沥青混合料动态模量增大,相位角减小。动态模量主曲线研究结果表明老化使沥青混合料的动态模量在整个温度（或频率）范围内变化幅度减小。     

Empirical approaches to combining revealed and stated preference data: Some recent developments with reference to urban mode choice

This paper replaces the nested logit ‘trick’ used in estimation of a modal choice model, when stated preference (SP) and revealed preference (RP) data are pooled, with an error component mixed logit model that can (i) relax the IID condition attached to subsets of alternatives in nested logit models, (ii) accommodate correlated observations, and (iii) reveal the relevant scale parameter for subsets of alternatives. Such a model can also incorporate state dependence between data types and preference heterogeneity on observed attributes. An example of choice among bus, train and car modes illustrates the difference in empirical evidence, especially elasticity outputs.     

Fast direction of arrival algorithm based on vector-sensor arrays using wideband sources

An acoustic vector sensor （AVS） can capture more information than a conventional acoustic pressure sensor （APS）. As a result, more output channels are required when multiple AVS are formed into arrays, making processing the data stream computationally intense. This paper proposes a new algorithm based on the propagator method for wideband coherent sources that eliminates eigen-decomposition in order to reduce the computational burden. Data from simulations and lake trials showed that the new algorithm is valid： it resolves coherent sources, breaks left/right ambiguity, and allows inter element spacing to exceed a half-wavelength.     

高速单体船推进系统参数辨识方法研究

建立高速单体船推进系统参数辨识的数学模型,采用优化的方法辨识推进系统的各参数,将辨识结果与仿真结果进行比较,验证该辨识方法的可靠性.