导电密封胶对不锈钢车体电阻点焊焊接性能影响研究

分析了电阻点焊原理,对相同的点焊搭接方式,分别采用3种工况进行焊接试验。3种工况分别采用相同焊接参数对搭接接触面涂导电密封胶和不涂导电密封胶的试件进行焊接;优化焊接参数后,对搭接接触面涂导电密封胶的试验件进行焊接。对3种工况下完成的焊接试件进行拉伸力检测试验、金相熔核尺寸检测和缺陷检测试验,对熔核直径、拉伸力、熔核内部缺陷的试验结果进行分析。试验结果表明:导电密封胶对电阻点焊的焊接性能存在影响;通过适当优化焊接参数,可以提高涂导电密封胶试件的焊接性能,焊接质量能够满足产品焊接要求。     

船用电器柜抗冲击设计研究

为增强船内部电器柜的抗冲击性能,采用有限元法对船内不同安装型式的电器柜结构进行了模态和抗冲击性能仿真分析,通过对比分析得出了使用撑杆加固型式安装的电器柜能显著提高船内电器柜的抗冲击性能的结论,并确定了电器柜抗冲击优化设计方案。     

Mode jumping in the lateral buckling of subsea pipelines

Unburied subsea pipelines under high-temperature conditions tend to relieve their axial compressive stress by forming localised lateral buckles. This phenomenon is traditionally studied under the assumption of a specific lateral deflection profile (mode) consisting of a fixed number of lobes. We study lateral thermal buckling as a genuinely localised buckling phenomenon by applying homoclinic (‘flat’) boundary conditions. By not having to assume a particular buckling mode we are in a position to study transitions between these traditional modes in typical loading sequences. For the lateral resistance we take a realistic nonlinear pipe-soil interaction model for partially embedded pipelines. We find that for soils with appreciable breakout resistance, i.e., nonmonotonicity of the lateral resistance characteristic, sudden jumps between modes may occur. We consider both symmetric and antisymmetric solutions. The latter turn out to require much higher temperature differences between pipe and environment for the jumps to be induced. We carry out a parameter study on the effect of various pipe-soil interaction parameters on this mode jumping. Away from the jumps post-buckling solutions are reasonably well described by the traditional modes whose analytical expressions may be used during preliminary design.     

基于职业能力的高职会计实践教学体系的重构

文章通过分析高职会计专业构建实践教学体系的必要性入手，分析会计职业能力的内涵，从会计课程体系、实训项目体系、实训项目教学设计三个方面探索了现代高职会计实践教学体系的构建，拓展会计实践教学的实训资源，完善构建实践教学体系的机制。     

递进式连锁经营管理专业实践教学改革研究——基于加盟创业项目视角

连锁经营管理专业人才培养目标大多定位在一线服务员或基层管理者，所培养的学生必须具备较强的连锁专业能力和创业能力，而大多数高职院校培养出来的学生在这些方面所表现出来的能力却差强人意，尤其是创业能力方面。本文提出将加盟创业项目贯穿于连锁经营管理实践教学全过程，按照“仿真训练-校内孵化-校内模拟-市场全真”四个阶段，形成一个递进式的实践教学流程，从而促使学生的专业能力和创业能力实现递进式提升。     

Design,analysis and performance evaluation of a third order distributed protocol for platooning in the presence of time-varying delays and switching topologies

This paper is concerned with the problem of designing a decentralized consensus protocol for platooning of non-identical vehicles in the presence of heterogeneous time-varying communication delays. The proposed control protocol makes use of a state feedback and to this aim drivetrain dynamics are modeled as third-order linear systems. Necessary and sufficient conditions for convergence and exponential stability, derived by using an appropriate Krasovskii functional, demonstrate the ability of the platoon in reaching the required regime with an exponentially bounded behavior. The proposed LMI-based approach allows to estimate both delay margin and decay rate. Moreover, convergence is proven under switching communication network topologies by means of a Lyapunov-Razumikhin function, and the assessment of a string stable behavior has been also theoretically investigated. High-fidelity simulations with Plexe show the effectiveness of the theoretical results in different driving conditions and in the presence of external disturbances and communication impairment. Different communication channel models are used in the validation stage to further prove robustness of the proposed methodology with respect hard delay and packets losses.     

盾构下坡掘进对推进阻力的影响研究

以神华新街6°煤矿斜井盾构工程为背景,针对盾构下坡掘进工况,通过建立盾构上作用的水土压力载荷与坡度的数学关系模型,推导出推进阻力与坡度的数学公式。结合工程实例,计算水平掘进与6°下坡掘进各推进阻力值,并利用MATLAB软件绘制下坡掘进时推进阻力随坡度变化的曲线。结果表明:1)6°下坡掘进的总推进阻力相对于水平掘进仅减小了约8%,坡度小于13°时,可通过水平掘进时的推进阻力减去重力沿掘进轴线上的分量来近似求得,且偏差小于10%;2)总推进阻力会随坡角的不断增大而减小;3)当坡度大于50.4°后,盾构有自动向下滑移的趋势,刀盘将自动压紧开挖面,导致刀具自动嵌入开挖面,增加了启动扭矩与换刀的难度。     

CCS水电站引水隧洞双护盾TBM施工围岩分类研究

为了对双护盾TBM隧洞施工中的围岩进行分类,以厄瓜多尔CCS水电站引水隧洞为例,参考RMR围岩分类方法,通过伸缩护盾的间隙和刀盘的空隙对洞壁和掌子面围岩进行观测,结合岩渣及掘进参数,获取岩石的质量指标RQD、节理间距和节理性状等信息。通过综合分析,选取岩石的回弹值、围岩的完整性、岩石的质量指标RQD、刀盘推力、刀盘扭矩、片状岩渣含量和地下水渗流量作为围岩分类的指标,然后对7个指标分别赋值,建立围岩的分类标准,并通过求和的方法进行综合围岩分类。分类结果表明:选取的7个指标可以克服双护盾TBM施工时无法对围岩进行全面地质素描的困难,可以满足TBM快速施工的需要,并且能较真实地反映围岩的情况,分类结果可靠。     

城市地下道路分(合)流匝道通风阻力特性

为分析多点进出结构的城市地下道路空气流动特性,以长沙市营盘路湘江隧道为原型,通过现场实测、缩尺模型试验以及CFD软件数值模拟方法,对分(合)匝道通风阻力特性进行了研究,考察了雷诺数、风量比、分岔角度对分(合)流匝道阻力特性的影响规律。研究结果表明:1)主隧道与匝道风量比、主隧道与匝道夹角是影响分(合)流匝道局部阻力系数的关键因素;2)城市地下道路分(合)流匝道局部阻力变化特性,不宜简单套用通风管道的三通构件的参数;3)结合最小二乘法和Matlab软件对计算结果进行多因素回归分析,给出了基于长沙营盘路湘江隧道的分(合)流匝道主隧道和匝道的局部阻力系数关联式。研究结果可为复杂结构城市地下道路通风系统阻力特性分析及通风工程优化设计提供方法参考。     

Direct yaw moment control and power consumption of in-wheel motor vehicle in steady-state turning

Driving force distribution control is one of the characteristic performance aspects of in-wheel motor vehicles and various methods have been developed to control direct yaw moment while turning. However, while these controls significantly enhance vehicle dynamic performance, the additional power required to control vehicle motion still remains to be clarified. This paper constructed new formulae of the mechanism by which direct yaw moment alters the cornering resistance and mechanical power of all wheels based on a simple bicycle model, including the electric loss of the motors and the inverters. These formulation results were validated by an actual test vehicle equipped with in-wheel motors in steady-state turning. The validated theory was also applied to a comparison of several different driving force distribution mechanisms from the standpoint of innate mechanical power.