光滑质点流体动力学(SPH)及其算法特性

基于Lagrange观点的无网格方法计算是建立在一群可移动的自适应性的质点基础之上,对特大变形区域和自由表面的捕捉有着较高的精度.光滑质点流体动力学(SPH)是无网格方法的一种,本文阐述其理论基础和计算方法,主要包括:SPH的基本概念、核近似和粒子近似的基本原理,核函数的构造方法、SPH形式的流体运动方程、边界处理方法和数值算例等多方面内容.研究工作在了解SPH方法的理论特点和潜在优势的同时,也为相关问题的深入研究和改进奠定了理论和算法基础.     

跨坐式单轨交通预应力钢筋混凝土轨道梁动力性能试验与分析

对重庆跨坐式单轨交通的预应力钢筋混凝土轨道梁、墩体结构进行了动力试验,测试其动力特性及在不同行车速度下的动力响应.测试及分析结果表明,预应力钢筋混凝土轨道梁结构实测自振特性与理论计算结果基本相符;轨道梁结构具有较好的竖向刚度和结构强度;单轨车辆以不同速度通过桥梁时,试验梁横向基频、横向加速度等横向振动性能与<铁路桥梁检定规范>的要求有一定差异;运行单轨车辆对轨道梁结构有一定的冲击作用,但不显著;墩体结构横向动力性能良好,满足限值要求.     

国外典型大城市市郊轨道交通的发展及其启示

介绍了纽约、柏林、巴黎、伦敦和东京5个城市的市郊轨道交通的线网特征(线网发展、线网特点、车辆运用及供电技术),以及线网运营以及线网客流等发展情况,从中找出发展规律和可借鉴的经验.在此基础上,针对我国市郊轨道交通发展面临的问题,建议:重视市郊轨道交通的发展,提前做好规划;市郊轨道交通车站应根据沿线客流的需求布设,运营组织应有较大的灵活性,以提高运营效率;由于郊区的建筑密度较低,存在设置较高电压线的防护空间,应尽可能采用城市铁路系统制式.     

高速列车通信网络技术特点及其应用

现代列车朝高速化、自动化、舒适化方向发展已经成为必然趋势.列车通信网络已成为高速列车控制系统的关键技术.它能够通过对列车运行及车载设备动作的相关信息进行集中管理,从而保障列车安全高速运行.介绍了列车通信网络的两条总线,即纹线式列车总线(WTB)和多功能车辆总线(MVB),并分析了两层网络拓扑结构.根据现场总线技术在我国高速列车上的应用情况,比较了WTB、MVB、LonWorks、CAN等几种总线的特点,根据其特点可选取不同的应用领域.     

开发国产300 km/h以上速度动车组的设想

讨论了CRH系列动车组消化吸收再创新的总体目标与主要思路。提出了国产300km/h以上速度动车组的技术创新总体方案的初步设想和技术路线,以及需要研究解决和完成的主要任务、具体内容与所要达到的技术指标。     

基于水运系统的超大型集装箱船经济可行性论证

集装箱船大型化带来的规模经济效益受到航运公司的空前关注,但是市场运营环境变化时超大型集装箱船是否具有经济性的问题却并未引起足够的重视.文章通过选择两种典型的集装箱船型,当市场环境因素变化时,对它们的经济可行性进行论证.文章提出的单位综合营运成本模型对以往文献提出的模型进行了比较大的改进,并在实例中进行应用,可作为航运公司船型优选的参考.文章结论表明超大型集装箱船在不同的市场环境条件下有不同的经济可行性.     

Development of an LIF image processing technique for measuring drop sizes in a pre-swirl spray

Depth of field effects in laser sheet imaging were considered for droplet sizing of a pre-swirl spray. A pre-swirl spray is formed before the hollow-cone type main-swirl spray from a D.I. gasoline injector, and shows transient characteristics with high axial velocity. A microscopic imaging technique was applied to obtain high spatial resolution LIF tomograms of the pre-swirl spray. A 1 mm thick Nd:YAG laser sheet was used as a light source to make the LIF tomograms that were imaged using a high-resolution CCD camera. The droplet sizing of the pre-swirl spray was carried out using an image processing technique. In the image processing procedure, the laser sheet-straddling large-sized droplets were carefully taken into account to remove the errors caused by the depth of field effects from the limited thickness and the energy distribution of the laser sheet. The mean intensity of the individual droplets and the line profile of the LIF signal around the droplet edge were inspected to screen the laser sheet-straddling large-sized droplets. In order to consider the effects of the size-dependent LIF signal intensity, the size-classified or ensemble-averaged mean intensity of the individual droplets was introduced. The mean droplet sizes such as AMD and SMD were calculated using only screened droplets, and they slightly increase before considering the depth of field effects.     

Comparison of HC species from diesel combustion modes and characterization of a heat-up doc formulation

This study summarizes engine speed and load effects on HC species emissions from premixed charge compression ignition (PCI) and conventional diesel combustion, and it evaluates diesel oxidation catalyst (DOC) formulations on a gas flow reactor for the purpose of diesel particulate filter regeneration or lean NO_x trap desulfation. HC emissions are sampled simultaneously by a Tedlar bag for light HC species and by a Tenax TA™ adsorption trap for semi-volatile HC species, and they are analyzed by gas chromatography with a flame ionization detector. The bulk temperature and residence time during combustion are key parameters that are important for understanding the effects of speed and load on engine-out HC emissions. The degree of post-flame oxidation is higher in PCI than in conventional combustion, and it is increased for PCI with a higher speed and load, as indicated by a lower fuel alkanes/THC ratio, a higher alkenes/fuel alkanes ratio, and a higher methane/THC ratio. Ethene and n-undecane are two representative HC species, and they are used as a surrogate mixture in the gas flow reactor to simulate PCI and conventional combustion with in-cylinder post fuel injection. Among the three DOC formulations tested, the catalyst with constituent precious metals of platinum and palladium (PtPd) showed the best light-off performance, followed by PtPd with an addition of cerium dioxide (PtPd+CeO₂), and platinum (Pt), regardless of exhaust compositions. Conventional combustion exhaust composition shows a lower light-off temperature than that of PCI, regardless of catalyst formulation.     

Analysis process of a steering system using a concept model for idle vibration

This paper describes the development of an optimal design process for a steering column system and supporting system. A design guide is proposed at the initial concept stage of the development process to obtain sufficient stiffness of the steering system while reducing the idle vibration sensitivity of the system. Case studies on resonance isolation are summarized, where vibration modes among the systems are separated by applying a vibration mode map at the initial stage of the design process. This study also provides design guidelines for an optimal dynamic damper system using a CAE (computer aided engineering) analysis. The damper FE (finite element) model is added to the vehicle model to analyze the relation between the frequency and the sensitivity of the steering column system. This analysis methodology makes it possible to achieve target performance in the early design stage and reduction of damper tuning activity after the proto car test stage. Through the proposed steering column system development process, a lightweight vehicle with high stiffness is possible prior to the proto build stage. Furthermore, the improved process is expected to contribute to reducing the overall development period and the number of proto car tests necessary to achieve the desired steering system performance.     

土木工程结构健康监测研究进展

阐述了实施土木工程结构健康监测的必要性,介绍了结构健康监测系统的内涵、组成、监控内容、监控系统功能及其工程应用,讨论了结构损伤检测中的两类方法,重点对损伤识别中的动力指纹法、模型修正法、神经网络法、遗传算法进行了分析和比较,阐述了健康监测领域今后的主要研究问题和发展方向.