OBO改装船船体施工工艺的探讨

文章针对大型改装船采用传统施工工艺方法难以提高市场竞争力这一问题,提出借鉴造船的先进施工技术,才能有效提高大型改装船的改装效率并加以论证。     

桥墩盖梁的设计与计算分析

盖梁是桥梁结构中重要的受力部件,起着连接上下部结构的重要作用.盖梁设计需要通过上下部受力计算拟定盖梁尺寸并建立计算模型,进行内部受力分析.     

多年冻土地区路基不均匀融沉变形计算分析

采用Biot固结理论的有限元方程,对多年冻土地区路基的不均匀融沉变形进行计算与分析。为路面融沉附加应力计算提供依据。     

应用固有应变法计算焊接变形时材料模型的选择研究

分别采用理想弹塑性模型和双线性强化模型,推导出各自的固有应变计算公式,研究不同材料模型对于焊接结构变形的影响。研究结果表明,两种固有应变计算公式所预测的变形结果之间相对误差较小,即不同材料模型的选择对预测结构焊接变形的影响可以忽略。     

整体温差作用下高桩码头基桩内力计算方法

为研究高桩码头完建后整体温差对基桩内力的影响,结合工程实例,建立三维有限元模型,对上部平台温变规律进行分析,认为斜桩、直桩对上部平台温变约束作用均可忽略不计,平台处于自由温变状态,存在水平位移为零的温变发散中心。基于刚性平台自由温变规律,提出了考虑斜桩码头平动扭转的三维算法,三维算法的桩顶位移、内力与有限元结果接近。对于全直桩或近似对称的斜桩码头,还可简化为平动的二维算法。并给出了直桩、斜桩内力的估算简式,由估算式可知,位于发散同心圆上的直桩内力大于斜桩内力,桩顶轴力、弯矩与桩径2次、4次方成正比,桩径对温差内力的影响显著。     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

板裂围岩结构弯曲失稳分析

文章分析了板裂结构地质背景及板裂介质岩体特征,研究了板裂围岩破坏模式及力学机理,并结合工程实例,利用随机有限元模型对板裂结构屈曲破坏进行分析。     

软弱围岩隧道修建新方法——核心土加固变形控制法

2006年我国铁路系统相关施工单位开始接触变形控制法隧道施工技术,经过长达5年的基础理论学习研究与准备,在铁道部和兰渝铁路公司的支持下,2011年由中铁瑞威公司和意大利土力公司联合在兰渝铁路桃树坪隧道进行了中国首次隧道核心土加固变形控制法应用试验研究,并取得成功。文章通过工程实践,对桃树坪隧道的工程概况、地质问题、施工工艺、施工设备及核心土加固控制变形技术的应用效果作了较详细介绍。     

舰艇典型分段焊接工艺仿真及其变形规律分析

针对舰艇分段结构采用不同的装焊工艺顺序,会出现不同的焊接变形的问题,以某舰艇256#分段焊接的整体最小变形量为目标,基于热弹塑性和固有应变理论,对该分段焊接常用的六种不同焊接工艺顺序,采用ABAQUS有限元软件进行焊接变形数值仿真;对比六种不同的方案计算结果表明,舰艇分段焊接采用C方案以矩形块为单位,由中间向两端对称焊接、从船中向两舷焊接横向和纵向构件的工艺顺序,该分段整体变形量为最小,为最优焊接工艺顺序方案。