钢制车体疲劳强度校核方法

介绍了在缺乏材料疲劳性能数据时进行钢制车体疲劳强度校核的方法,从静态应力极限值和焊接疲劳数据的选取、Goodman疲劳极限线图的绘制方法、常用焊接接头类型、疲劳许用应力极限的确定、设计应用等方面对该方法进行了讨论。     

试验研究作用于准椭圆沉箱群墩上的不规则波波浪力（英文）

An experimental investigation of irregular wave forces on quasi-ellipse caisson structures is presented. Irregular waves were generated based on the Jonswap spectrum with two significant wave heights, and the spectrum peak periods range from 1.19 s to 1.81 s. Incident wave directions relative to the centre line of the multiple caissons are from 0° to 22.5°. The spacing between caissons ranges from 2 to 3 times that of the width of the caisson. The effects of these parameters on the wave forces of both the perforated and non-perforated caissons were compared and analyzed. It was found that the perforated caisson can reduce wave forces, especially in the transverse direction. Furthermore, the relative interval and incident wave direction have significant effects on the wave forces in the case of multiple caissons.     

泰州长江大桥巨型深水沉井施工技术

泰州长江大桥中塔沉井号称"世界第一巨型深水沉井",高76m,入土深度达55m,详细介绍了该沉井施工的整体工艺流程,其多项创新性施工工艺对类似沉井施工具有借鉴意义。     

An Adaptive Joint Source/Channel Coding Using Error Correcting Arithmetic Codes

An approximately optimal adaptive arithmetic coding (AC) system using a forbidden symbol (FS) over noisy channels was proposed which allows one to jointly and adaptively design the source decoding and channel correcting in a single process, with superior performance compared with traditional separated techniques. The concept of adaptiveness is applied not only to the source model but also to the amount of coding redundancy. In addition, an improved branch metric computing algorithm and a faster sequential searching algorithm compared with the system proposed by Grangetto were proposed. The proposed system is tested in the case of image transmission over the AWGN channel, and compared with traditional separated system in terms of packet error rate and complexity. Both hard and soft decoding were taken into account.     

动车铝合金车体焊接接头非线性疲劳累积损伤模型

动车铝合金车体焊接接头疲劳寿命对加载顺序比较敏感,而传统的Miner法无法考虑载荷加载顺序。本文在损伤曲线法的基础上,提出非线性累积损伤模型的数学表达式及参数拟合算法,给出平均应力情况下使用此模型的扩展算式,并对铝合金焊接的对接接头、角接接头进行两级加载实验。实验结果证明:本文模型计算误差小于10%,比传统的Miner模型有更高的精确度,说明这一模型可用于铝合金焊接结构疲劳寿命计算。     

大连港矿石码头项目中外合资的影响分析及相关建议

通过大连矿石码头功能地位的分析,揭示了合资经营矿石码头对全国进口铁矿石接卸系统和对我国东北地区矿石接卸系统的影响,并提出了相关的建议。     

基于Cruise-Carsim联合仿真的电动汽车动力性经济性分析

为了解决单一软件对电动汽车性能仿真分析中存在的误差和不足的问题,提出了一种基于Cruise-Carsim联合仿真的建模方法.首先将Carsim中内置的传动系统与Simulink平台建立的电池、电机及控制策略模型相匹配,建立了某型电动汽车的Carsim整车模型,然后将Cruise中建立的以传动系统为核心的电动汽车模型与C...     

银川黄河大桥拓宽的纵向缝设计

大桥加宽是交通发展所面临的新问题,无论采用单侧或双侧加宽,均存在新、旧桥之间的衔接问题,本文所述的是新、旧桥采用分离设计,且用柔性桥面纵向缝的设计方案。     

某下穿通道快速化预制拼装工艺总体设计方案

随着国家城市化进程的不断加快,传统现浇工艺存在着施工质量相对较差、对周边环境影响较大、劳动力成本不断上升等一系列问题,与国家提出的高质量发展目标存在一定差距,为此国家从政策方面开始推行预制拼装工艺。以某斜交下穿通道工程采用预制拼装工艺为例,从结构分块、接缝形式及防水、吊点布置等关键环节进行了系统性的研究与探讨,提出了一整套的设计方案,为工程的建成提供了有力的技术支撑,同时也为类似工程提供了有意义的参考借鉴。     

浅谈沥青混合料路面接缝的施工方法

根据施工经验介绍了沥青混合料路面接缝的施工方法.