瑞典条分法在南京江宁河边坡稳定计算中的应用

选取江宁河典型性断面,结合河道工程地质条件,合理选取参数,运用瑞典条分法对江宁河堤防工程边坡现状进行稳定分析计算。     

福厦铁路玉塘洋特大桥台尾路基垮塌原因分析及处理措施

东南沿海地区滨海软土特别发育,临时工程的不当设置,将影响铁路工程路基的稳定。结合福厦铁路玉塘洋特大桥台尾路基垮塌实例,对垮塌原因进行分析,提出了以桥代路方案,实施结果保证了路基工程的稳定性,和福厦铁路施工的顺利推进。     

Fault classification method for the driving safety of electrified vehicles

A fault classification method is proposed which has been applied to an electric vehicle. Potential faults in the different subsystems that can affect the vehicle directional stability were collected in a failure mode and effect analysis. Similar driveline faults were grouped together if they resembled each other with respect to their influence on the vehicle dynamic behaviour. The faults were physically modelled in a simulation environment before they were induced in a detailed vehicle model under normal driving conditions. A special focus was placed on faults in the driveline of electric vehicles employing in-wheel motors of the permanent magnet type. Several failures caused by mechanical and other faults were analysed as well. The fault classification method consists of a controllability ranking developed according to the functional safety standard ISO 26262. The controllability of a fault was determined with three parameters covering the influence of the longitudinal, lateral and yaw motion of the vehicle. The simulation results were analysed and the faults were classified according to their controllability using the proposed method. It was shown that the controllability decreased specifically with increasing lateral acceleration and increasing speed. The results for the electric driveline faults show that this trend cannot be generalised for all the faults, as the controllability deteriorated for some faults during manoeuvres with low lateral acceleration and low speed. The proposed method is generic and can be applied to various other types of road vehicles and faults.     

洞新高速公路岩溶路基处理工程实例

在分析总结国内外相关研究成果的基础上,基于洞新高速公路现场施工处治经验,开展现场变形预测分析,总结提出适用的溶洞路基施工处治技术,并采用有限元计算与理论分析相结合的方法,对加固效果进行分析。     

浅析涂装涂膜缺陷分析工具及方法

文章结合涂装车间生产现场实例,介绍了涂膜缺陷在线放大观察法,偏光显微镜法,逐层打磨+在线放大观察法,断面取样+显微放大法,扫描电镜+能谱分析仪法所使用工具,操作方法,优缺点及实例图片,对涂膜缺陷分析具有一定得指导意义。     

闵浦二桥主塔下横梁预应力分析及施工技术

上海闵浦二桥工程是一座公轨两用一体化双层特大桥,主桥为独塔双索面连续钢板桁组合梁双层斜拉桥。该文通过理论模拟分析计算,对主塔下横梁施工过程预应力进行了分析,并介绍了其施工技术。     

手动油泵溢油问题的工艺分析及解决

本文针对生产现场出现的液压手动油泵排气孔溢油现象,从液压翻转机构工作原理出发,分析手动油泵溢油产生的原因,使问题得以解决,取得良好效果。     

230m网状吊杆组合梁拱桥设计分析

深汕大桥为主跨230 m网状吊杆钢混组合梁拱桥,主梁采用钢-混组合脊骨梁断面,全宽56 m,大挑臂长18 m;主拱采用二次抛物线拱轴线,六边形截面,拱高41.273 m,矢跨比为1/5.5。大桥为网状吊杆在市政超宽桥面桥梁中的首次尝试运用,对拱轴线、矢跨比、拱截面形式、拱高、拱倾角、风撑设置、吊杆间距、主梁形式等参数进行了比选分析。     

某出口米轨动车组(Tc车)车体设计及试验对比研究

介绍了使用大型通用计算机辅助工程软件ANSYS和有限元方法,对某出口米轨动车组(Tc车)进行了分析计算的过程,并通过实际物理样机试验数据与计算数据的比对,分析车身强度的可靠性。     

Statistical comparison of trace metal concentrations in wild mussels (Mytilus galloprovincialis) in selected sites of Galicia and Gulf of Biscay (Spain)

Concentrations of five trace metals (Cd, Hg, Pb, Cu and Zn) in wild mussels (Mytilus galloprovincialis) from the Galician and Gulf of Biscay areas in Spain were monitored from 2000 to 2004. A pool of mussel soft tissue was prepared using 50 or more individuals representing the available size range (35–60 mm) present at the sampling points (A Coruña, Pontevedra and Vigo–Galicia, NW of Spain—and Avilés, Bilbao and Santander–Gulf of Biscay). Metals were analysed by atomic absorption spectrometry, AAS, (flame–AAS: Cu and Zn; graphite furnace–AAS: Cd and Pb; flow injection-cold vapour–AAS: total Hg). Quality of the chemical analyses was assessed by participation in periodic QUASIMEME intercalibration exercises carried out from 2000 to 2004, while the present study was developed . Univariate statistical studies, Anova (Analysis of the Variance) and Principal Component Analysis (autoscaled data, Varimax rotation) were carried out. Differences between the two areas as well as certain temporal trends were found and, in general, the Gulf of Biscay samples showed higher metallic contents, mainly close to Avilés, where iron and steel factories thrown residues for years into a nearby coastal area.