柴油机电子调速器可靠性设计

文章阐述了柴油机电子调速器可靠性质量指标的重要性，提出了可靠性设计是提高电子调速器可靠性的基础，并具体地介绍了柴油机电子调速器的可靠性设计，采用裕度设计，降额设计，保护电路设计和耐振设计等技术措施，多年的实际应用证明，其可靠性是能够得到了分保证的。     

上海地铁轨面接触疲劳裂纹伤损的产生、影响及防治

随着上海地铁运营年限的不断增加,系统设备也不断老化,特别是钢轨的伤损越来越频繁.对上海轨道交通1号线钢轨伤损的类型特点进行了分析,并依据其特点对1号线自1999年来发现的伤损钢轨进行了统计.在众多的钢轨伤损中,轨面裂纹伤损非常严重.运用轮轨接触力学分析了轨面裂纹伤损产生及发展的主要原因,并提出了防治措施.     

Parametric study of the main parameters influencing the catalytic efficiency of a diesel oxidation catalyst: Parameters influencing the efficiency of a diesel catalyst

This work studies the impact of five parameters: CO and HC engine-out emissions, space velocity, average value and profile of exhaust temperature, on Diesel CO and HC tail-pipe emissions. The first part of this work is conducted on a reactor and shows that both HC and CO light-off temperature increases with CO and HC input concentration. CO and HC initial concentration influence the adsorption/desorption capacities of HC only at high temperatures. Space velocity also influences CO and HC conversion efficiency. The second part of this work studies the impact of different combinations of HC and CO engine-out emissions on CO and HC conversion and tail-pipe emissions in the case of New European Driving Cycle. This part proposes that a Diesel oxidation catalyst must be mainly studied at the Urban Part of NEDC, as the CO and HC conversions are very high at the extra-urban part of NEDC. CO and HC conversion efficiencies are also dependent on exhaust temperature and catalytic volume. In the case of two different profiles of exhaust temperature with the same average temperature, CO and HC conversion efficiency is lower in the case of the smoother profile.     

Comparison of HC species from diesel combustion modes and characterization of a heat-up doc formulation

This study summarizes engine speed and load effects on HC species emissions from premixed charge compression ignition (PCI) and conventional diesel combustion, and it evaluates diesel oxidation catalyst (DOC) formulations on a gas flow reactor for the purpose of diesel particulate filter regeneration or lean NO_x trap desulfation. HC emissions are sampled simultaneously by a Tedlar bag for light HC species and by a Tenax TA™ adsorption trap for semi-volatile HC species, and they are analyzed by gas chromatography with a flame ionization detector. The bulk temperature and residence time during combustion are key parameters that are important for understanding the effects of speed and load on engine-out HC emissions. The degree of post-flame oxidation is higher in PCI than in conventional combustion, and it is increased for PCI with a higher speed and load, as indicated by a lower fuel alkanes/THC ratio, a higher alkenes/fuel alkanes ratio, and a higher methane/THC ratio. Ethene and n-undecane are two representative HC species, and they are used as a surrogate mixture in the gas flow reactor to simulate PCI and conventional combustion with in-cylinder post fuel injection. Among the three DOC formulations tested, the catalyst with constituent precious metals of platinum and palladium (PtPd) showed the best light-off performance, followed by PtPd with an addition of cerium dioxide (PtPd+CeO₂), and platinum (Pt), regardless of exhaust compositions. Conventional combustion exhaust composition shows a lower light-off temperature than that of PCI, regardless of catalyst formulation.     

泥岩边坡的病害特征及破坏模式研究

高边坡问题在基础建设的发展过程中不断出现,尤其是泥岩边坡问题。文中通过分析泥岩边坡6种病害坡体结构:顺倾层状结构、反倾层状结构、陡倾层状结构、基座式上软下硬结构、交叉式楔形结构,得出了泥岩边坡在不同坡体结构下可能的破坏方式;最终归纳总结出了5种典型的泥岩边坡破坏模式:风化剥落、楔体破坏、倾倒破坏、滑移-拉裂破坏、牵引式滑动破坏。     

基于CML的多重边复杂公交线路网络相继故障研究

为给城市公交系统的规划、建设和管理优化提供决策依据,在现有公交网络模型的基础 上,以常规公交线路为网络的节点,公交线路间的若干个公共停靠站点为连边,建立了基于耦合 映像格子的多重边复杂公交线路网络模型,基于该模型研究了多重边复杂公交线路网络的相继故 障问题。通过Matlab 数值仿真技术,详细分析了扰动幅值和耦合强度对网络相继故障的影响。研 究结果表明：蓄意攻击多重边复杂公交线路网络中度最大的节点最容易造成网络全局故障;另 外,耦合强度和扰动幅值越大,多重边复杂公交线路网络越容易发生相继故障。     

泥石流对公路工程的影响及其防护措施

介绍泥石流的形成条件及其对公路工程的影响,结合"5·12"汶川地震后泥石流灾害工程的防治对策,对公路工程泥石流防治的措施进行分析和探讨,对震后修建的防治泥石流灾害新型结构进行总结。     

数值仿真中单元密度对材料失效应变的影响

对普通船用低碳钢拉伸实验进行数值校准计算,确定用于数值仿真计算中的材料最大失效应变参数。通过改变有限元网格大小,确定不同网格密度对应的材料失效应变与工程断裂应变的关系,绘制了数值计算中材料失效应变的修正系数α曲线。     

加筋地基极限承载力的极限平衡分析

从分析加筋地基的破坏模式:在加筋垫层底部形成剪切契体的密加筋地基破坏模式和在加筋垫层顶部形成剪切楔体的疏加筋地基破坏模式入手,采用极限平衡分析方法,分析了加筋地基的极限承载力。     

用内阻法预测阀控铅酸蓄电池故障

免维护电池不等于不需要维护。本文介绍了用内阻法测量蓄电池故障的原理及方法,并通过试验得出:根据免维护电池内阻值的变化可预测出机车蓄电池的故障。