基于AQWA的双浮箱-双水平板浮式防波堤水动力分析

运用AQWA软件,针对双浮箱-双水平板浮式防波堤,建立不规则波作用下浮体锚链的耦合模型,研究时域情况下,改变水平板与浮箱的垂直间距,分析浮体运动响应以及锚链受力情况;并深入探讨了不同波浪周期和波高情况下水平板长度对浮体运动响应以及锚链受力的影响.结果表明,增加水平板与浮箱的垂直间距和水平板长度,可以有效减小浮体运动响应和锚链受力.波高和波浪周期是浮体重要的水动力因素,波高越大,波浪周期越长,浮体运动响应越剧烈;当浮体水平板长度达到21米左右时,整个防波堤达到最佳锚泊状态.     

基于改进移动最小二乘法的结构可靠性分析

基于改进移动最小二乘法对结构可靠性问题进行分析,数值模拟结果表明,改进方法可有效提高计算精度.具体方法是使用椭圆范数代替二范数来度量样本点到中心点的距离,并根据上次迭代所得到的响应面在中心点处的法向量与坐标轴所成角度,对影响域进行旋转变换;从而将样本点的权重大小由样本点与中心点、响应面的距离共同决定,并将每次迭代得到的响应面函数在中心点处的法向信息包含在内.     

拖曳式试验系统拖缆平台振动测试与分析

工程应用中,拖曳式试验系统拖缆平台存在明显的振动现象,振动产生的辐射噪声会对环境声场产生影响.基于拖缆平台的结构及运行原理,分析其内部的主要激励源,并进行现场振动测试.测试试验对平台支柱、绞车系统和隔振装置的振动信号进行了测量和分析,结果表明,平台支柱存在一定程度的振动,绞车机架振动主要由传动装置激励产生,隔振螺栓隔振效果不佳.测试数据及结果可为系统在工程应用中的优化设计和振动控制提供参考.     

Electric vehicles for greenhouse gas reduction in China: A cost-effectiveness analysis

There have been ongoing debates over whether battery electric vehicles contribute to reducing greenhouse gas emissions in China’s context, and if yes, whether the greenhouse gas emissions reduction compensates the cost increment. This study informs such debate by examining the life-cycle cost and greenhouse gas emissions of conventional vehicles, hybrid electric vehicles and battery electric vehicles, and comparing their cost-effectiveness for reducing greenhouse gas emissions. The results indicate that under a wide range of vehicle and driving configurations (range capacity, vehicle use intensity, etc.), battery electric vehicles contribute to reducing greenhouse gas emissions compared with conventional vehicles, although their current cost-effectiveness is not comparable with hybrid electric vehicles. Driven by grid mix optimization, power generation efficiency improvement, and battery cost reduction, the cost-effectiveness of battery electric vehicles is expected to improve significantly over the coming decade and surpass hybrid electric vehicles. However, considerable uncertainty exists due to the potential impacts from factors such as gasoline price. Based on the analysis, it is recommended that the deployment of battery electric vehicles should be prioritized in intensively-used fleets such as taxis to realize high cost-effectiveness. Technology improvements both in terms of power generation and vehicle electrification are essential in improving the cost-effectiveness of battery electric vehicles.     

深水SPAR风机系统全耦合动力响应分析研究

文章采用联合开发的计算程序对深水SPAR风机的浮体、锚泊和风机各子系统进行了水—气动力的全耦合数值分析,研究了深水浮式风机系统的动力响应特点。浮体水动力计算采用基于二阶精度的混合波浪模型(Hybrid Wave Model)的MORISON公式,锚泊系统采用细长杆理论通过非线性有限元方法实现,风机系统的空气动力分析采用基于多体气动弹性理论的FAST模块。以浮体控制方程为主体,通过模块间的载荷与位移传递在每个时间步上迭代求解,形成完全耦合的时域分析方法。通过对NREL的5MW SPAR风机系统在随机海况下的水动力响应分析,验证了该方法的有效性,并分析了浮式风机子系统间的混合动力作用。     

超声冲击处理对高强钢焊接接头残余应力影响的数值模拟

超声冲击处理(UIT)是一种有效的焊后改善焊接接头疲劳性能的工艺措施,其借助机械撞击和超声振动的共同作用,使焊趾表面产生塑性变形从而引入有益的压缩残余应力。为评价UIT技术对焊接接头残余应力的影响,该文提出了一套新的数值分析方法,包括焊接数值模拟及随后的超声冲击处理过程的动态弹塑性有限元分析。在有限元模型中考虑了实际的工艺参数和超声促成的材料软化效应。以船用高强钢AH36非承载十字焊接接头为研究对象,将预测的超声冲击处理前后的残余应力分布与实验结果进行对比,两者有较好的吻合。在此基础上,探讨了静态预载荷对超声冲击处理态残余应力再分布的影响。     

基于任务需要的海警大型舰艇基本需求建模与分析

以线性和非线性需求结合方式建立了以满足任务需要为条件的海警大型舰艇基本需求组合模型,预测计算了多个样本国海警大型舰艇基本需求数,结果表明该模型有一定的实用性.据此对中国海警大型舰艇基本需求进行预测,预测结果可对中国海警大型舰艇发展规划提供参考.     

Simulating ad-hoc demand-responsive transportation: a comparison of three approaches

Transport models are used to evaluate new infrastructure and public transport services, varied levels of demand, and new ideas for demand management. Exploring these proposals virtually is easier than implementation and testing in situ. However, existing models are based around traditional forms of transportation. As part of a feature analysis using a case study approach, three different simulation packages (a simple custom-developed package, traffic microsimulation, and agent-based simulation) are used to develop and demonstrate simulations of demand-responsive transportation (DRT) and analyze the advantages and disadvantages of each simulation approach for evaluating DRT. While the simulations display some relational replication (meaning they produce similar relational patterns with respect to certain variables), they do not show distributional replication (that is, the value of the results is not statistically similar), meaning that under- or over-estimation of predicted travel could occur. Recommendations for the application of each modeling approach are made.     

青岛地铁蓄电池工程维护车车钩挂梁结构设计

文章分析了青岛地铁2号线蓄电池工程维护车出现车钩"低头"现象的原因,并给出了一种通过加装车钩挂梁结构以支撑车钩的解决方案。文章还对挂梁结构进行了强度校核,确保该结构满足实际工况需求。     

Fueling for contingencies: The hidden cost of unpredictability in the air transportation system

The aviation community is increasing its attention on the concept of predictability when conducting aviation service quality assessments. Reduced fuel consumption and the related cost is one of the various benefits that could be achieved through improved flight predictability. A lack of predictability may cause airline dispatchers to load more fuel onto aircraft before they depart; the flights would then in turn consume extra fuel just to carry excess fuel loaded. In this study, we employ a large dataset with flight-level fuel loading and consumption information from a major US airline. With these data, we estimate the relationship between the amount of loaded fuel and flight predictability performance using a statistical model. The impact of loaded fuel is translated into fuel consumption and, ultimately, fuel cost and environmental impact for US domestic operations. We find that a one-minute increase in the standard deviation of airborne time leads to a 0.88 min increase in loaded contingency fuel and 1.66 min in loaded contingency and alternate fuel. If there were no unpredictability in the aviation system, captured in our model by eliminating standard deviation in flight time, the reduction in the loaded fuel would between 6.12 and 11.28 min per flight. Given a range of fuel prices, this ultimately would translate into cost savings for US domestic airlines on the order of $120–$452 million per year.