骨架密实结构水泥稳定碎石离析原因及改善措施

骨架密实结构水泥稳定碎石混合料中粗集料的含量增加,实际使用过程中混合料离析的可能性较大.在分析其产生离析的原因后,分别从混合料的材料组成设计、混合料的拌和装车、运输和摊铺等方面提出了改进措施,同时给出了定量评价混合料离析程度的试验方法和相应指标.     

低剂量水稳基层防治薄面层沥青路面反射裂缝研究

采用低剂量水泥稳定碎石基层作为防治薄面层沥青路面反射裂缝的主要方案,利用室内试验和试验路工程分别得到不同剂量水泥稳定碎石基层的收缩特性以及强度发展规律。力学分析和观测结果都证明该方法可以有效防治薄面层沥青路面反射裂缝。     

水泥混凝土路面结构模糊随机可靠度设计方法研究

我国水泥混凝土路面设计经历了3个发展阶段：经验法、力学一经验法和可靠度设计法。由于荷载、环境作用和结构设计参数的随机性和模糊性，它们都将影响路面结构的可靠度水平。为了更好地发展现有路面设计理论，系统地分析了现有水泥混凝土路面设计规范，对路面结构可靠度进行了定义和讨论。采用模糊随机可靠度理论，对水泥混凝土路面结构可靠度设计方法进行了系统分析，研究提出了路面模糊随机可靠度的设计公式，讨论了各个设计变量的变异性，并结合具体设计提出了详细的步骤和思路。     

水泥混凝土路面质量病害问题探讨

根据目前水泥混凝土路面建设比较普遍的情况,针对施工中出现比较多的质量病害进行了分析,分别从水泥混凝土路面的裂缝产生的过程,材料、配合比、水灰比、施工操作等对质量的影响,以及产生外观质量缺陷的原因进行了评述.     

Fitness-for-purpose assessment of cracked offshore wind turbine monopile

In this paper, the procedure for flaw acceptability assessment is examined through a case study of a semi-elliptical surface crack in an offshore monopile as it grows till it forms a through thickness crack. Using the procedure prescribed in an industrial standard (BS 7910), the fracture ratio, K_r is shown to increase monotonically with increasing crack depth. The load ratio, L_r, is initially insensitive to the crack depth. However, there is a rapid increase in L_r when the crack depth to thickness ratio exceeds 80%. L_r values obtained from detailed 3D FE limit analysis using elastic-perfectly-plastic material behaviour do not exhibit the asymptotic behaviour predicted by BS 7910 as the flaw transitions from deep crack to through-thickness crack. Furthermore, K_r predicted by BS 7910 is shown to be an over-estimation for the typical dimensions of offshore monopiles. The findings suggest that a structure with a deep flaw may be identified as unacceptable based on BS 7910 when it may still possess a non-trivial amount of structural residual life. This is a concern for monopiles where crack growth as a large flaw forms a significant part of the total life.     

汽车高压线束中高压端子的压接性能分析

高压线束是新能源汽车动力和信号传输分配系统的重要载体,高压线束端子的压接性能是新能源汽车最重要的性能指标。论文针对新能源汽车高压线束端子压接性能建立数据分析模型,通过分析相关数据,找出高压线束端子压缩比的最佳适配范围,以提高高压线束冷压接的工艺能力和质量水平。     

Centrifuge modelling of pipe-soil interaction in clay with crust layer

Seabed in regions, such as the Gulf of Guinea and North West Shelf of Australia, may exhibit a crust layer where the undrained shear strength can be an order of magnitude higher than that of the immediately underlying sediment. This can complicate design of steel catenary risers, where fatigue depends on the cyclic vertical stiffness of the pipe-soil interaction. Potential punch-through of the riser into the underlying soft soil may invalidate design assumptions based on the pipe-soil stiffness within the crust layer. The long-term evolution of pipe-soil stiffness within the crust layer, which exhibits similar properties to an over-consolidated soil, is also poorly understood. This paper describes centrifuge model tests undertaken in a clay sample with a crust layer, simulating the punch-through process of a pipe under load control and investigating the pipe-soil stiffness during long-term cyclic loading tests under displacement control. Results confirm that the potential for punching-through the crust layer depends strongly on the relative ratio of pipe diameter to crust layer thickness. The long-term evolution of pipe-soil stiffness showed a steady increase after an initial remoulding stage in contractile soils (normally consolidated and lightly over-consolidated), but a steady reduction in the heavily over-consolidated, more dilatant, crust. The magnitude of pipe-soil stiffness changes (during both remoulding and reconsolidation) is governed by the over-consolidation ratio of the soil and the amplitude of the cyclic displacements. This study provides insights on the relevant cyclic stiffness to consider when assessing SCR fatigue life in over-consolidated soils and soils exhibiting a superficial crust layer.     

道路混凝土分层结构评价方法与指标研究(英文)

结合机理探寻、试验分析和对大量实体工程检测数据的提炼集成,系统研究了道路混凝土外分层与内分层结构,建立起混凝土分层结构模型及评价方法。建议采用密度变异性和吸水率变异性指标评价道路混凝土外分层和内分层结构,为工艺控制道路混凝土内、外分层奠定了基础。     

Assessment of fatigue strength of steel butt-welded joints in as-welded condition – Alternative approaches for curve fitting and mean stress effect analysis

Experimental fatigue data for butt-welded joints in as-welded condition and under constant amplitude tensile loading (secondary bending included) were analyzed using the nominal stress system and the notch stress system. Two approaches were used; a standard fitting procedure and minimization of the sum of squared perpendicular distances from a line with a fixed and free slope. In all cases, the latter method gave better agreement between the experimental and predicted fatigue life and fatigue strength. The analyses showed both with all broken specimen data included and with reduced data that the FAT225 curve, as recommended by IIW, might be too optimistic for the notch stress approach in the case of butt-welded joints in as-welded condition. It was also found that use of the local stress ratio instead of the applied stress ratio might explain many issues concerning current observations and apparent inconsistencies in reported literature.