Delivering improved alerts,warnings, and control assistance using basic safety messages transmitted between connected vehicles

When vehicles share their status information with other vehicles or the infrastructure, driving actions can be planned better, hazards can be identified sooner, and safer responses to hazards are possible. The Safety Pilot Model Deployment (SPMD) is underway in Ann Arbor, Michigan; the purpose is to demonstrate connected technologies in a real-world environment. The core data transmitted through Vehicle-to-Vehicle and Vehicle-to-Infrastructure (or V2V and V2I) applications are called Basic Safety Messages (BSMs), which are transmitted typically at a frequency of 10 Hz. BSMs describe a vehicle’s position (latitude, longitude, and elevation) and motion (heading, speed, and acceleration). This study proposes a data analytic methodology to extract critical information from raw BSM data available from SPMD. A total of 968,522 records of basic safety messages, gathered from 155 trips made by 49 vehicles, was analyzed. The information extracted from BSM data captured extreme driving events such as hard accelerations and braking. This information can be provided to drivers, giving them instantaneous feedback about dangers in surrounding roadway environments; it can also provide control assistance. While extracting critical information from BSMs, this study offers a fundamental understanding of instantaneous driving decisions. Longitudinal and lateral accelerations included in BSMs were specifically investigated. Varying distributions of instantaneous longitudinal and lateral accelerations are quantified. Based on the distributions, the study created a framework for generating alerts/warnings, and control assistance from extreme events, transmittable through V2V and V2I applications. Models were estimated to untangle the correlates of extreme events. The implications of the findings and applications to connected vehicles are discussed in this paper.     

船舶低硫柴油系统设计的分析与优化

就新辟航线首制船“汉亚直达”集装箱船的低硫柴油系统,叙述了船舶低硫柴油系统的设计经验,从当前国内外对船用燃油硫含量的要求、应对方案到船舶低硫柴油冷却方式选择、低硫柴油冷却系统设计、高/低硫柴油转换、使用低硫柴油风险分析及处理等方面进行详细叙述,为业内同行提供参考。     

船用厨房和具有烹调设备的配餐室的通风计算及空气处理方法

本文介绍了ISO 9943-2009国际标准和GBT 20846-2007中国国家标准中对船用厨房和具有烹调设备的配餐室的通风计算及空气处理中提出的送风量的计算方法，提出另一种更易于大家理解和接受的简易计算方法和空气处理过程，供工程技术及设计研究人员参考。     

Modeling free-flow speed according to different water depths—From the viewpoint of dynamic hydraulic pressure

In this paper, we propose a method of modeling free flow speed from the viewpoint of hydroplaning. First, the lift forces for different water depths were estimated using Bernoulli’s equation. Compared with the result of the experimental test performed by the Japan Automobile Research Institute, the hydrodynamic pressure coefficient was determined to be 0.03 (tf s²/m⁴). The validation of the predicted lift force is found in another published paper. A very good match is found between the computed values by the proposed numerical model and the data in other published papers. Then, the loss of contact force is considered to evaluate the hydroplaning performance of a tire. To simulate the hydroplaning speed, a tire-sliding model was utilized to obtain the traction and friction forces between the road surface and the tire. The observation data obtained in Japan in 2009 is compared with the physically computed hydroplaning speed, yielding the conclusion that the traction force at the measured desired speed is, on average, 23.4% of the traction force at hydroplaning speed. The analytical model offers a useful tool to quantitatively show that the free flow speed changes as the water depth increase.     

BIM技术在清华珠三角公建项目施工中的应用研究

随着科技的进步及项目管理水平的提高,BIM技术应运而生。本文以清华珠三角研究院粤港澳大湾区创新基地项目为依托,从应用目标、应用前准备工作、前期策划管理、技术管理、质量安全管理、物资设备管理、进度管理、经济成本管理等方面开展BIM技术在公建项目施工中的应用研究,结果表明:使用BIM技术,使项目管理走向精细化、全面化、高效化,并提高质量标准,增加安全保障,减少项目成本,提高项目利润率;同时与AI技术相结合,使BIM技术更加具有简便性,产出更大效益。     

一种基于动态分析的突变和异常波动预警方法

针对模拟量的突变和异常波动预警,给出一种基于动态分析的、可以应用于各种模拟量的统一预警方法,该方法已被应用于CSM-TH型集中监测程序和智能分析系统中,在多条线700余站现场运行的7年中,收到良好效果,得到用户认可。     

Extreme hawser tension assessment for FPSO vessel during offloading operation in Bohai bay

The Floating Production Storage and Offloading Unit (FPSO) is an offshore vessel that produces and stores crude oil prior to tanker transport.Robust prediction of extreme hawser tensions during Floating Production Storage and Offloading (FPSO) operation is an important safety concern. Excessive hawser tension may occur during offloading operations, posing an operational risk. In this paper, AQWA has been used to analyze vessel response due to hydrodynamic wave loads, acting on a specific FPSO vessel under actual sea conditions. Experimental validation of numerical results has been discussed as well.This paper advocates methodology for estimating extreme response statistics, based on simulations (or measurements). The modified ACER (averaged conditional exceedance rate) method is presented in brief detail. Proposed methodology provides an accurate extreme value prediction, utilizing all available data efficiently. In this study the estimated return level values, obtained by ACER method, are compared to the corresponding return level values obtained by Gumbel method. Based on the overall performance of the proposed method, it is concluded that the improved ACER method can provide more robust and accurate prediction of the extreme hawser tension.Data declustering issue has been addressed. Paper highlights ability of ACER method to account for a set of varying sea state probabilities, as required in engineering long term statistical analysis.Described approach may be well used at the vessel design stage, while defining optimal vessel parameters that would minimize potential FPSO hawser tension.     

共享停车泊位数量可变下交通流逐日演化规律

为了揭示在共享停车泊位数量可变条件下的网络交通流逐日演化规律,首先构建了共享泊位交易系统,并考虑了交易市场中的共享泊位提供者可以选择2种异质性的价格预期方式,即理性预期方式和幼稚预期方式;而后对共享泊位的均衡价格、2种提供者的占比差、高峰时段公交和小汽车需求的演化规律进行了分析;其次,以2条平行路径的路网为例,对网络交通流量分配的最终演化结果进行了分析;最后,在对上述2个系统的最终演化状态给出定量判据后,以北京市实际路网为例进行了数值试验。理论分析和数值试验结果表明:①对于共享泊位交易系统,若供给曲线斜率小于需求曲线斜率,则共享泊位交易系统的唯一均衡解可实现无条件渐进稳定;否则若理性提供者的交易与预测成本之和大于幼稚提供者,则存在临界提供者选择强度,使得共享泊位交易系统在大于此临界值条件下出现分岔或混沌现象;②对于网络交通流系统,若出行成本对路径流量敏感度小,路径选择概率对出行成本敏感度小,小汽车需求量不大,则系统唯一的均衡解可能是渐进稳定的,否则系统会出现分岔或混沌状态;③当共享泊位交易系统处于渐进稳定状态时,若提供者对共享泊位的价格变动不敏感,用户对其价格变动敏感,潜在共享泊位需求量不大,理性提供者的交易与预测成本之和并非远大于幼稚提供者,提供者选择强度不大,则由于受到共享泊位交易总量的限制,高峰时段的均衡小汽车需求不大,导致网络交通流系统的最终演化状态容易趋向于渐进稳定;④当共享泊位交易系统处于混沌状态时,网络交通流系统会产生更加严重的分岔与混沌现象。     

新建本科院校市场营销专业模块化教学改革——基于岗位和能力导向的应用技术人才培养

通过行业论证和企业调查,明确市场营销职业岗位类别设置及特征,掌握这些职业岗位对应用技术性本科学生知识、能力和素质等方面的现实需求,通过问卷调查本校市场营销专业学生对专业教学的现状及建议,参考广东部分新建本科院校的做法,建立市场营销专业的岗位需求、工作内容、职业能力、模块教学和任务学习为一体的教学模式。     

Evaluating determinants of attractiveness and their cause-effect relationships for container ports in Taiwan: users’ perspectives

The attractiveness of ports is usually a pre-requisite and necessary condition for ports to achieve competitiveness, as well as the springboard to explore the competitive advantages of ports. To determine whether a port is competitive, it is necessary to explore whether it boasts certain factors that make the port attractive to users. The main purpose of this article is to apply the Analytic Hierarchy Process (AHP) method and the Decision Making Trial and Evaluation Laboratory (DEMATEL) technique to evaluate key determinants of attractiveness and their cause/effect relationships for container ports in Taiwan. The empirical results showed that: (1) Top six determinates of attractiveness for container ports are ‘ample cargo sources,’ ‘favorable port charges,’ ‘dense ship network and routes,’ ‘low transshipment costs,’ ‘efficient wharf operations,’ and ‘adequate wharfs and back-line land,’ respectively. (2) Among the above six determinants of attractiveness, ‘ample cargo sources’ is the cause determinant. Three determinants of port attractiveness, ‘favorable port charges,’ ‘dense ship network and routes,’ ‘low transshipment costs,’ which are the effect determinants. They are affected by the determinants of attractiveness of ‘ample cargo sources’. In addition, this study discusses the above findings and expects to provide the study results to Taiwan’s port authorities for reference.