Roll- and pitch-plane-coupled hydro-pneumatic suspension. Part 2: dynamic response analyses

In the first part of this study, the potential performance benefits of fluidically coupled passive suspensions were demonstrated through analyses of suspension properties, design flexibility and feasibility. In this second part of the study, the dynamic responses of a vehicle equipped with different configurations of fluidically coupled hydro-pneumatic suspension systems are investigated for more comprehensive assessments of the coupled suspension concepts. A generalised 14 degree-of-freedom nonlinear vehicle model is developed and validated to evaluate vehicle ride and handling dynamic responses and suspension anti-roll and anti-pitch characteristics under various road excitations and steering/braking manoeuvres. The dynamic responses of the vehicle model with the coupled suspension are compared with those of the unconnected suspensions to demonstrate the performance potential of the fluidic couplings. The dynamic responses together with the suspension properties suggest that the full-vehicle-coupled hydro-pneumatic suspension could offer considerable potential in realising enhanced ride and handling performance, as well as improved anti-roll and anti-pitch properties in a very flexible and energy-saving manner.     

Fuzzy and adaptive fuzzy control for the automobiles’ active suspension system

Two typical criteria for good vehicle suspension performance are their ability to provide good road handling and increased passenger comfort. The main disturbance affecting these two criteria is terrain irregularities. Active suspension control systems reduce these undesirable effects by isolating car body motion from vibrations at the wheels. This paper describes fuzzy and adaptive fuzzy control (AFC) schemes for the automobile active suspension system (ASS). The design objective is to provide smooth vertical motion so as to achieve the road holding and riding comfort over a wide range of road profiles. The efficacy of the proposed control schemes is demonstrated via simulations. With respect to the optimal linear quadratic regulator (LQR), it is shown that superior results have been achieved by the AFC.     

Non-stationary random vibration analysis of three-dimensional train–bridge systems

The quarter car model has been used extensively to study the benefits of active, semi-active and passive suspensions. Despite the evident simplicity of the model, the insights obtained from this model have been found to have counterparts in half- and full-car suspension models. Among the most interesting results of the analysis of the quarter car are the relationships among certain transfer function and invariant points in the frequency response functions. These results are of great interest for the application of linear control techniques to the design of active suspensions and the optimisation of linearised passive suspensions. This paper attempts to show why some of the limitations implied by the model are less absolute than they at first seem.     

提速车辆转向架橡胶球铰刚度分析

根据提速客车转向架橡胶球铰的结构特点，结合橡胶的本构模型及相关系数，利用ABAQUS软件对其径向刚度、轴向刚度、偏转刚度和扭转刚度进行了分析，并将计算结果和试验结果进行了比较。结果表明：计算结果和试验结果具有较好的一致性，利用有限元分析能指导橡胶球铰及同类产品的结构设计。     

Scott变压器内部故障暂态仿真模型

结合Scott变压器接线原理与基本方程，建立了由2个单相变压器组成的Scott变压器的内部故障仿真模型，分析了故障发生时单相变压器各端口电压同三相电源之间的关系，仿真计算了其内部故障电流及励磁涌流。     

内燃机车柴油机振动烈度评定方法探讨

从机车在"0位"时柴油机晃动现象入手,对"柴油机振动烈度评定方法"进行了分析探讨。重点对测量点、测量参数计算、评定准则进行了阐述,重新提出了"柴油机振动烈度评定方法",同时给出了振动位移的控制值。     

客车寿命周期成本模型研究

依据IEC300-3-3《寿命周期成本分析》标准中有关寿命周期成本分析的基本原理，以25型客车为对象，采用成本项目建模方式，建立了其寿命周期成本模型。运用该寿命周期成本模型，可为客车的设计、生产、销售及维修决策提供经济性依据。     

关于互通选型与规模的几点认识

立交型式的选择是立交建设中重要的前期工作，型式不同，将使整个立交的交通功能、投资、景观及社会和经济效益等方面均受到影响。     

考虑疲劳损伤约束的车辆焊接结构轻量化设计

针对车辆焊接结构轻量化与疲劳寿命问题,提出考虑焊缝疲劳损伤约束的轻量化设计方法.采用国际焊接学会(IIW)的焊接接头与部件的疲劳设计评估标准,基于迈纳尔损伤累积理论,预测焊缝的疲劳累积损伤;以结构质量最小为目标,在应力、位移等常规约束基础上,加入焊缝疲劳累积损伤约束,建立了车辆焊接结构的轻量化模型.研究基于有限元分析的结构轻量化优化设计策略,采用试验设计方法对设计空间合理抽样,以样本数据建立近似响应模型,采用数值优化算法寻优,提高复杂工程问题优化计算的效率.利用该方法对某焊接构架进行了考虑焊缝疲劳损伤约束的轻量化设计,采用均匀设计法对14个设计变量进行50次试验,以样本数据及响应值建立径向基神经网络近似模型,采用序列二次规划算法进行优化设计,质量减轻12.5%.对实例的计算证明该方法的可行性与实用性.     

基于CarSim自适应巡航控制建模与仿真

文章首先利用模糊法则建立能够反映驾驶员反应时间的隶属度函数,并根据制动过程理论建立安全距离模型,通过安全距离模型建立期望加速度模型。然后分别建立加速和制动模型,在此基础上制定控制模式转换策略,基于PID算法设计巡航控制器。最后在Matlab/Simulink和CarSim联合仿真环境中验证所设计的控制系统的有效性。