自动驾驶中座椅旋转速度对乘员的影响

为提高自动驾驶车辆的安全性,提出用一种旋转速度曲线把座椅旋转至指定角度,研究此旋转速度下的乘员生物力学响应.首先,根据所建立的碰撞模型与假人试验数据进行对比验证;其次,改变座椅旋转方向和速度研究乘员旋转至指定位置乘员的生物力学响应.结果表明:在200 ms内采用等腰梯形旋转速度曲线旋转至±45°和±90°不会引起乘员额...     

多元评价体系组合模型在铁路隧道变形预测中的应用

为克服传统预测模型结构单一、预测精度及稳定性不足等缺陷,提出多元体系组合预测模型的建模思路。首先,基于支持向量机、BP神经网络及ARMA模型3种单一预测模型,构建铁路隧道变形预测体系;再以均方根误差、误差平方和及平均绝对误差等为评价准则或指标,构建各预测结果的误差评价体系,求解各单项预测模型的权值贡献指数,得到最优组合权值;然后利用后验差检验、残差检验和关联度检验构建预测精度校验体系,对组合预测结果进行检验,评价预测模型的有效性;最后,结合工程实例,对多元体系组合预测模型在特大断面隧道中的变形预测效果进行检验。结果表明:多元评价体系组合模型预测相对误差值均小于2%,具有较高的预测精度,且较单一预测模型具有更高的预测精度,也一致通过相关检验,验证了多元体系组合预测模型的有效性。     

Assessing the performance of SpeedInfo radar traffic sensors

Traffic speed is a crucial input for real-time traffic management applications. Operating agencies typically deploy their own sensors to collect the measurements, e.g., loop detectors. Recently, SpeedInfo emerged with a different paradigm for traffic speed collection: instead of selling hardware to operating agencies, at each link the company deploys its own Doppler radar in a self-contained wireless unit to measure traffic speeds and then sells the speed data. This study uses well-tuned loop detector-based speed measurements to evaluate 15 of the Doppler radar sensors over several months while the two traffic data collection systems were operating concurrently. The extended study period includes potentially challenging and transient conditions for the radar sensors: both recurrent (rush hour congestion and late night low flow) and nonrecurrent (incidents and precipitation). The analysis took a broad overview, comparing speed measurements from the radar sensors against the concurrent loop detector data and then explicitly looked for any anomalous pattern in the radar data such as latency and system outages. The work found the radar measurements are generally good, but also identified several points that should be considered before deployment, including latency, different biases in free flow and congestion, vulnerability to precipitation, and sensitivity to mounting angle.     

傅立叶变换在柴油机瞬态转速计算中的应用研究

介绍了一种计算瞬态转速的方法,原理是通过对曲轴转速波动信号进行傅立叶变换,在频谱中获取缺齿出现的频率,以此来换算出转速。在YC6112ZLQ柴油机上进行了实机试验,计算值与实测值比较的结果表明,此方法计算发动机瞬态转速准确而有效。     

Development of analytical procedure for selection of control measures to reduce congestions at various freeway bottlenecks

Variable speed limit (VSL) and ramp metering (RM) affect freeway traffic operations in different ways and, accordingly, result in different effects on system travel time. The primary objective of this study is to propose an analytical procedure to help determine which control measure should be selected given different freeway bottlenecks and traffic conditions. The bottlenecks considered included an isolated merge bottleneck, a merge bottleneck with a closely spaced upstream off-ramp, and a diverge bottleneck with a closely spaced upstream on-ramp. Two RM and a VSL control strategies were considered, including the ALINEA, ALINEA/Q and feedback based VSL. The maximum achievable improvements in system efficiency by various control measures were calculated and the results were tested using modified cell transmission models. A coordinated control strategy that combined ALINEA/Q and VSL control was also proposed. The effects of VSL and RM control on system travel time at different freeway bottleneck areas were compared to identify the applicable conditions of different control measures. The analytical procedure was proposed for the selection of control measures at different bottlenecks and the ex-ante estimation of control effects were also discussed.     

郑万高铁隧道大断面机械化施工关键技术研究

为实现大断面隧道机械化施工,针对郑万高速铁路湖北段隧道机械化施工所面临的掌子面稳定性控制、支护结构参数优化、机械化施工工法及施工工艺参数选取等主要问题,采取现场试验、资料调研、理论分析等手段,提出掌子面稳定性综合分级方法及稳定性控制措施,并对超前支护、洞身支护参数进行优化。郑万高速铁路采用全断面法和微台阶法2种工法进行施工,同时,对高压劈裂注浆、低预应力锚杆、超挖控制、高标号初喷混凝土等施工工艺进行探索和应用; 在信息化项目管理平台的基础上,建立基于施工动态管理的隧道作业面分类管理方法。研究成果在郑万高速铁路的成功应用将极大提高隧道建设的机械化水平,为隧道机械化施工提供参考。     

郑万高铁大型机械化施工隧道位移控制基准研究

依托郑万高铁湖北段大断面隧道洞群,针对其开挖断面面积大、软弱围岩占比高、采用大型机械化大断面法施工的特点,开展初期支护位移现场监控量测,对监控量测数据进行分类统计、包络回归分析,得到Ⅳ、Ⅴ级围岩深、浅埋不同大断面法（全断面法、微台阶法）开挖下初期支护位移沿隧道纵向的函数表达式及各工况下分段位移占极限位移的比值。最后结合 Q/CR 9218-2015《铁路隧道监控量测技术规程》中初期支护极限位移值,给出郑万高铁大型机械化施工隧道各工况下初期支护位移控制基准建议值。结果表明： 郑万高铁隧道Ⅳ、Ⅴ级围岩采用深、浅埋不同大断面法开挖时,按距掌子面距离的分阶段位移控制基准相差较大,现行Q/CR 9218-2015《铁路隧道监控量测技术规程》中统一规定不合理;围岩级别、埋深及开挖方法相同时,拱顶沉降和洞周水平收敛规律基本一致。     

隧道衬砌可靠指标的优化求解方法

为解决JC法计算隧道衬砌可靠指标过程中极限状态选用方法的缺陷,通过随机有限元方法和Monte-Carlo法对时速350 km高速铁路双线隧道Ⅲa、Ⅳb型衬砌进行抽样计算,得到2种衬砌各截面偏心距平均值和变异系数; 通过对素混凝土和钢筋混凝土衬砌极限状态功能函数及其适用条件的分析,引入几何优化法,以约束函数表示功能函数的约束条件,建立可靠指标的优化求解模型; 选用寻优性能良好的Global Search函数,对2种衬砌各截面可靠指标进行优化求解,并与JC法进行对比,证明优化方法的优势。     

软弱围岩隧道机械化全断面爆破开挖初期支护受力特性研究

软弱围岩隧道开挖后自稳能力差,易发生大的变形、钢架扭曲等现象。为降低安全风险,依托郑万高铁高家坪隧道进口机械化全断面爆破施工,对支护体系下的围岩压力、钢架应力、初喷混凝土应力、锚杆轴力、围岩内部位移、掌子面挤出变形等进行系统试验研究。试验结果表明： 围岩压力、钢架应力、初喷混凝土应力受岩性条件、施工扰动等因素影响显著,随时间推移均呈现“急剧增大、缓慢增大、波动变化、稳定收敛”的变化规律; 通过锚杆轴力峰值位置可以初步判定围岩塑性区范围约为距洞壁3.0 m。基于现场试验监测,通过数值模拟分析了初期支护结构压应力、轴力和弯矩的分布情况,与现场量测数据相符,较好地反映了初期支护受力特征。本次试验的相关方法、手段和结论对隧道机械化大断面施工软弱围岩变形与支护体系受力研究具有借鉴作用,同时也为建立科学合理的支护结构体系提供了参考。     

郑万高铁隧道大型机械化配套全断面法施工围岩-支护结构相互作用力学特性研究

为研究郑万高铁大型机械化配套全断面法施工围岩-支护结构相互作用力学特性,依托郑万高铁隧道现场实测数据,确定台阶法和大型机械化配套全断面法2种工法施工的围岩压力分布特征,并采用数值模拟的方法建立围岩-支护结构有限元模型,分析2种工法对围岩压力和结构内力的影响规律。研究结果表明： 1)台阶法多次施工扰动易导致支护结构和围岩之间产生空隙而发生脱空,大型机械化配套全断面法施工对围岩扰动次数少,初期支护快速封闭成环,可保证初期支护及围岩之间良好的密贴性; 2)在软弱围岩中,采用大型机械化配套全断面法施工比台阶法更有利于改善结构受力,减缓结构内部偏心受压的程度,能有效发挥拱形隧道结构承载力; 3)大型机械化配套全断面法在软弱围岩快速施工、控制支护结构变形、保证支护结构受力安全等方面具有综合优势。