Pragmatic regularization of element-dependent effects in finite element simulations of ductile tensile failure initiation using fine meshes

For the evaluation of the structural response in accidental scenarios like ship collisions, the simulation of tensile failure initiation is inevitable. Here, one difficulty is that the process of failure initiation is a very local process, which cannot be simulated in its details at present due to the computing effort which would be required. However, there are various approaches how the failure initiation can be simplified and simulated in finite element models of large thin-walled structures. A short overview of these approaches is given. A pragmatic approach, which is suitable for relatively small elements for the simulation of failure initiation in uniaxial to biaxial stress states, is chosen within this paper for further investigations regarding the applicability for thin-walled steel structures. Exemplary simulations with solid and, in particular, shell elements are used to demonstrate how the effects of element size and other element properties can be considered in the simulation of failure initiation. The focus is also on imperfections that are relevant in simulations with small elements. For this purpose, an indentation experiment is simulated with different imperfections.     

地铁隧道二次衬砌钢筋网防裂性能研究

为了定量分析防裂钢筋网提高隧道衬砌结构抗裂性能的机理和幅度,以地铁双线隧道二次衬砌结构为研究对象,采用荷载结构法和杆系有限元数值模拟方案,定量分析二次衬砌结构不设置与设置钢筋网这2种情况下的开裂临界荷载。其中素混凝土结构以达到极限拉应变为临界状态,衬砌结构增设钢筋网后以达到GB 50157-2013《地铁设计规范》允许的最大裂缝宽度0.2mm为临界状态。分析结果表明,配置防裂钢筋网后,Ⅲ级和Ⅳ级围岩衬砌结构抗裂性能可分别提高22.4%和19.3%,Ⅴ级围岩衬砌结构抗裂性能提高15.2%;Ⅲ级和Ⅳ级围岩二次衬砌结构的破坏形式由脆性破坏变为延性破坏,从而提高了其安全性能。     

Numerical study on the dynamic response of a truncated ship-hull structure under asymmetrical slamming

Dynamic response of ship-hull structure under slamming has tracked widespread attention in the marine structural design. However, our understanding on the dynamic characteristics largely relies on the symmetrical slamming cases. This paper presented a preliminary numerical investigation on the dynamic response of a truncated ship-hull structure under asymmetrical slamming based on the uncoupled CFD-FE method. Asymmetrical slamming loads were predicted through combining the seakeeping analysis and CFD method. In there, three kinds of motions (vertical, horizontal and roll motions) of 2D ship sections were obtained through the seakeeping analysis and then the slamming pressure was predicted through simulating the water entry with various motions based on CFD method. The dynamic response was analyzed through finite element method. Numerical predictions including ship motions, slamming loads and dynamic analysis were validated against published experimental data and numerical calculations. The characteristics of asymmetrical slamming loads were analyzed showing obvious asymmetry in space, and the dynamic characteristic of the ship bow structure was further clarified through discussing the deformation and stress distribution. These results are useful for readers for better understanding the dynamic characteristics of the bow structure under slamming.     

大跨度上承式铁路钢桁梁桥建设管理与创新

大跨度上承式连续钢桁梁是铁路桥梁结构的创新形式,能有效降低桥墩的建筑高度,降低基础与桥墩的施工难度和工程造价,技术、经济优势突出,在山区铁路桥梁建设中具有较强的适用性.这种新的铁路桥梁结构形式技术标准尚待完善.本文依托新建玉溪至磨憨铁路的重点控制性工程元江特大桥(108.0+151.5+249.0+151.5+108.0)m上承式连续钢桁梁,分析总结大跨度上承式连续钢桁梁在结构设计、加工制造、现场架设等方面的创新成果,为类似桥梁建设提供借鉴.     

激光焊接技术在轨道交通车辆中的应用

为解决轨道交通车辆不锈钢车体电阻点焊的外观质量差、密封性差、效率低等缺点,对部分熔透激光焊接工艺在不锈钢车体焊接中的应用开展了研究。研究包括:部分熔透激光叠焊原理、参数优化试验、显微组织分析、疲劳性能分析,以及激光焊接不锈钢车辆侧墙的结构改进。研究结果表明,不锈钢车体焊接中采用部分熔透激光叠焊工艺,可以获得高质量的表面状态及疲劳强度,车体结构强度高于EN12663标准中的要求。     

真空断路器用单稳态永磁机构概述

本文对单稳态永磁机构与传统机构以及双稳态永磁机构的特点进行了对比,对其结构与工作原理进行了简单说明,并对其发展前景进行了简要探讨。     

Analysis of structural crashworthiness of double-hull ships in collision and grounding

A conceptual design framework for collision and grounding analysis is proposed to evaluate the crashworthiness of double-hull structures. This work attempts to simplify the input parameters needed for the analysis, which can be considered as a step towards a design-oriented procedure against collision and grounding. Four typical collision and grounding scenarios are considered: (1) side structure struck by a bulbous bow, (2) side structure struck by a straight bow, (3) bottom raking, (4) bottom stranding. The analyses of these scenarios are based on statistical data of striking ship dimensions, velocities, collision angles and locations, as well as seabed shapes and sizes, grounding depth and location. The evaluation of the damage extent considers the 50- and 90-percentile values from the statistics of collision and grounding accidents. The external dynamics and internal mechanics are combined to analyse systematically the ship structural damage and energy absorption under accidental loadings.     

基于ANSYS的三通道储罐结构加固及修复技术

以一台三通道储罐为分析对象,此储罐在轻微压力环境下即发生了局部开裂。以ANSYS有限元方法为基础,通过在内部合理布置T型钢加强筋的方式进行结构加固。并在确保结构强度的前提下,计算出了板制T型钢厚度的最优解。自加固修复后,此三通道储罐已安全运行2 a以上,这种基于ANSYS的结构加固及修复技术,体现了良好的工程实用性和经济性。     

自装卸式驮背多功能运输车及关键技术

介绍了自装卸式STX₁/STX₂型驮背多功能运输车的主要技术参数、结构配置及适应的装载工况,阐述了该车的关键技术和站场配套要求。     

船舶开孔梁局部屈曲的无网格MLPG分析方法

[目的]针对船舶开孔梁板易产生局部屈曲效应、受到较高的集中载荷作用会产生明显的结构响应和屈曲破坏力的问题,提出采用无网格数值方法对该类问题进行数值分析。[方法]首先,以问题域离散节点为基础建立其紧支函数,运用加权余量法建立系统位移场离散方程,并由移动最小二乘法构造离散节点的形函数,以获得位移函数的逼近函数;然后,结合经简化的屈曲评估法,将屈曲方程特征值求解进行降阶处理,得到更为精确的屈曲载荷因子;最后,进行算例演示,比较所提方法和传统计算方法并进行验证。[结果]结果显示,所提方法有效,其结果与原结构有着更高的契合度。[结论]针对开孔板梁的无网格法数值分析特性可为分析各种形状的蜂窝状板梁结构提供一种新的思路。