基于基准有限元模型的箱梁TMD振动控制研究

针对高架桥梁结构引起的振动噪声问题,研究TMD控制箱梁结构振动的特性。为了获得精准的箱梁有限元模型,首先以铁路32 m简支箱梁桥为原型,按10:1的几何相似比设计制作简支箱梁缩尺试验模型,应用ANSYS软件建立初始动力有限元模型;对有限元模型模态分析与试验模型模态测试得到的自由模态信息进行误差分析,并采用基于灵敏度分析的模型修正技术对初始动力有限元模型弹性模量和密度进行修正,得到基准有限元模型,误差确认结果显示修正后的有限元模型更精准地反应箱梁的振动特性;进一步利用基准有限元模型,开展TMD控制简支箱梁桥振动的研究,研究结果表明TMD对于抑制桥梁竖向共振有很好的效果。     

福州轨道交通建设安全管控平台的设计与应用

福州城市轨道交通建设规模不断增大，复杂的地质、环境条件以及众多工种施工的交叉作业和人员活动，给安全生产带来挑战。针对建设全过程安全管控的具体业务关系和需求分析，梳理和固化工作岗位、职责、流程、响应、整改等安全管理的事项和要求，强化对管控过程的追溯和考核管理。研究信息平台的业务需求、平台架构、网络拓扑、功能模块、数据库设计方法和实现思路，利用Ssm框架、Quartz框架、Encache技术以及SQLServer数据库技术，设计开发基于B/S模式的城市轨道交通安全管控信息系统，应用于在建的5条线路。信息平台的应用，可实现安全管理的标准化、科学化和精细化，极大地提高管理水平和工作效率。     

Coloured Petri net-based traffic collision avoidance system encounter model for the analysis of potential induced collisions

The Traffic Alert and Collision Avoidance System (TCAS) is a world-wide accepted last-resort means of reducing the probability and frequency of mid-air collisions between aircraft. Unfortunately, it is widely known that in congested airspace, the use of the TCAS may actually lead to induced collisions. Therefore, further research regarding TCAS logic is required. In this paper, an encounter model is formalised to identify all of the potential collision scenarios that can be induced by a resolution advisory that was generated previously by the TCAS without considering the downstream consequences in the surrounding traffic. The existing encounter models focus on checking and validating the potential collisions between trajectories of a specific scenario. In contrast, the innovative approach described in this paper concentrates on quantitative analysis of the different induced collision scenarios that could be reached for a given initial trajectory and a rough specification of the surrounding traffic. This approach provides valuable information at the operational level. Furthermore, the proposed encounter model can be used as a test-bed to evaluate future TCAS logic changes to mitigate potential induced collisions in hot spot volumes. In addition, the encounter model is described by means of the coloured Petri net (CPN) formalism. The resulting state space provides a deep understanding of the cause-and-effect relationship that each TCAS action proposed to avoid an actual collision with a potential new collision in the surrounding traffic. Quantitative simulation results are conducted to validate the proposed encounter model, and the resulting collision scenarios are summarised as valuable information for future Air Traffic Management (ATM) systems.     

深圳地铁永磁同步牵引系统研究分析

牵引传动系统是轨道交通车辆装备实现机电能量转换的“心脏”单元,其性能在某种程度上决定轨道交通车辆的动力品质、能耗和控制特性,是轨道交通车辆节能升级的关键系统。而永磁同步牵引系统以其高效率、高可靠性和低能耗的优势特点,受到轨道交通行业的密切关注。文章阐述深圳地铁10号线永磁同步牵引系统批量装车概况,重点分析永磁同步牵引系统组成及优势,指出推广应用永磁同步牵引系统的经济和社会效益显著。     

CACC车头时距与混合交通流稳定性的解析关系

研究协同自适应巡航控制(Cooperative Adaptive Cruise Control，CACC)车头时距对不同CACC比例下混合交通流稳定性的影响关系，进而为CACC车头时距设计提供参考. 应用优化速度模型(Optimal Velocity Model，OVM)作为手动车辆的跟驰模型，PATH真车实验标定的模型作为CACC车辆的跟驰模型. 基于传递函数理论，推导混合交通流稳定性判别条件，计算关于CACC比例与平衡态速度的混合交通流稳定域. 分析混合交通流在任意速度下稳定所需满足的临界CACC比例与CACC车头时距的解析关系，提出随CACC比例增加的可变 CACC车头时距设计策略，并通过数值仿真实验验证所提可变CACC车头时距策略的正确性. 研究结果表明：在所提可变CACC车头时距策略下，CACC车头时距随CACC比例增加而逐渐降低，避免取值较大影响混合交通流通行能力的提升；当CACC比例大于35%时，混合交通流在任意速度下稳定.研究结果可为大规模CACC真车实验的实施提供理论设计参考.     

船舶甲板智能抛丸机器人设计

为解决在船舶外场涂装阶段除锈和拉毛施工效率低、质量不稳定、环境污染严重等问题,设计一款用于船舶甲板的智能抛丸机器人。简介该型机器人系统组成,阐述其抛丸分系统、除尘分系统和越障辅助机构的硬件设计及其软件设计,并设计手动遥控和自主导引操作方式。实船测试结果表明,该型机器人可满足船舶甲板除锈清理的工作要求。     

轨道交通信号控制系统LCC估算方法研究与应用

从产品全生命周期成本概念出发,阐述了轨道交通信号控制系统生命周期的特点和成本构成;从企业视角提出了一种轨道交通信号控制系统的LCC估算方法;通过企业项目成本管理信息化系统统计产晶LCC的各项数据,结合财务数据进行归一化估算,并定期进行回归迭代,规范化实施分析与评价,从而得出产話的LCC改进建议,为公司战略决策提供了重要参考依据。     

Controller design for gating traffic control in presence of time-delay in urban road networks

Recent studies demonstrated the efficiency of feedback-based gating control in mitigating congestion in urban networks by exploiting the notion of macroscopic or network fundamental diagram (MFD or NFD). The employed feedback regulator of proportional-integral (PI)-type targets an operating NFD point of maximum throughput to enhance the mobility in the urban road network during the peak period, under saturated traffic conditions. In previous studies, gating was applied directly at the border of the protected network (PN), i.e. the network part to be protected from over-saturation. In this work, the recently developed feedback-based gating concept is applied at junctions located further upstream of the PN. This induces a time-delay, which corresponds to the travel time needed for gated vehicles to approach the PN. The resulting extended feedback control problem can be also tackled by use of a PI-type regulator, albeit with different gain values compared to the case without time-delay. Detailed procedures regarding the appropriate design of related feedback regulators are provided. In addition, the developed feedback concept is shown to work properly with very long time-steps as well. A large part of the Chania, Greece, urban network, modelled in a microscopic simulation environment under realistic traffic conditions, is used as test-bed in this study. The reported results demonstrate a stable and efficient behaviour and improved mobility of the overall network in terms of mean speed and travel time.