车用柴油机电控开发系统的软,硬件设计及应用

本文研制了一种新的发动机电 控燃油系统的开发系统的微机测控系统。     

未来平地机模型

通过对液压与电子控制技术发展的研究,并结合机、电、液一体化在工程机械领域的应用,从平地机恒速驱动的变速传动系统与基于CAN总线技术的电子控制两个方面进行详细论述,对未来平地机的发展提供了一种新的思路,并就未来平地机自动调平技术提供了可实施的解决方案.     

水泥混凝土搅拌输送车液压传动系统设计

以8 m3水泥混凝土搅拌输送车为例,介绍了混凝土搅拌输送车驱动方案和液压系统主要参数的确定,传动系统原理图的拟定以及各液压元件的选型及功率、扭矩校核,并对整个系统的扭矩和功率流程进行了校核,保证了整个系统设计的合理性和可靠性.     

Closed-form multiclass cell transmission model enhanced with overtaking,lane-changing,and first-in first-out properties

A novel multiclass macroscopic model is proposed in this article. In order to enhance first-in, first-out property (FIFO) and transmission function in the multiclass traffic modeling, a new multiclass cell transmission model with FIFO property (herein called FM-CTM) is extended from its prior multiclass cell transmission model (M-CTM). Also, to enhance its analytical compactness and resultant computational convenience, FM-CTM is formulated in this paper as a set of closed-form matrix equations. The objective is to improve the accuracy of traffic state estimation by enforcing FIFO property when a fast vehicle cannot overtake a slow vehicle due to a limitation of a single-lane road. Moreover, the proposed model takes into account a different priority for vehicles of each class to move forward through congested road conditions, and that makes the flow calculation independent from their free-flow speeds. Some hypothetical and real-world freeway networks with a constant or varying number of lanes are selected to verify FM-CTM by comparing with M-CTM and the conventional CTM. Observed densities of VISSIM and real-world dataset of I-80 are selected to compare with the simulated densities from the three CTMs. The numerical results show that FM-CTM outperforms the other two models by 15% of accuracy measures in most cases. Therefore, the proposed model is expected to be well applicable to the road network with a mixed traffic and varying number of lanes.     

Model based urban traffic control,part II: Coordinated model predictive controllers

The present paper describes how to use coordination between neighbouring intersections in order to improve the performance of urban traffic controllers. Both the local MPC (LMPC) introduced in the companion paper (Hao et al., 2018) and the coordinated MPC (CMPC) introduced in this paper use the urban cell transmission model (UCTM) (Hao et al., 2018) in order to predict the average delay of vehicles in the upstream links of each intersection, for different scenarios of switching times of the traffic lights at that intersection. The feedback controller selects the next switching times of the traffic light corresponding to the shortest predicted average delay. While the local MPC (Hao et al., 2018) only uses local measurements of traffic in the links connected to the intersection in comparing the performance of different scenarios, the CMPC approach improves the accuracy of the performance predictions by allowing a control agent to exchange information about planned switching times with control agents at all neighbouring intersections. Compared to local MPC the offline information on average flow rates from neighbouring intersections is replaced in coordinated MPC by additional online information on when the neighbouring intersections plan to send vehicles to the intersection under control. To achieve good coordination planned switching times should not change too often, hence a cost for changing planned schedules from one decision time to the next decision time is added to the cost function. In order to improve the stability properties of CMPC a prediction of the sum of squared queue sizes is used whenever some downstream queues of an intersection become too long. Only scenarios that decrease this sum of squares of local queues are considered for possible implementation. This stabilization criterion is shown experimentally to further improve the performance of our controller. In particular it leads to a significant reduction of the queues that build up at the edges of the traffic region under control. We compare via simulation the average delay of vehicles travelling on a simple 4 by 4 Manhattan grid, for traffic lights with pre-timed control, traffic lights using the local MPC controller (Hao et al., 2018), and coordinated MPC (with and without the stabilizing condition). These simulations show that the proposed CMPC achieves a significant reduction in delay for different traffic conditions in comparison to these other strategies.     

Dynamic traffic metering in urban street networks: Formulation and solution algorithm

Traffic metering offers great potential to reduce congestion and enhance network performance in oversaturated urban street networks. This paper presents an optimization program for dynamic traffic metering in urban street networks based on the Cell Transmission Model (CTM). We have formulated the problem as a Mixed-Integer Linear Program (MILP) capable of metering traffic at network gates with given signal timing parameters at signalized intersections. Due to the complexities of the MILP model, we have developed a novel and efficient solution approach that solves the problem by converting the MILP to a linear program and several CTM simulation runs. The solution algorithm is applied to two case studies under different conditions. The proposed solution technique finds solutions that have a maximum gap of 1% of the true optimal solution and guarantee the maximum throughput by keeping some vehicles at network gates and only allowing enough vehicles to enter the network to prevent gridlocks. This is confirmed by comparing the case studies with and without traffic metering. The results in an adapted real-world case study network show that traffic metering can increase network throughput by 4.9–38.9% and enhance network performance.     

新建隧道下穿多座隧道施工技术

以渝黔引入贵阳枢纽铁路龙宝冲隧道下穿6座已建及在建隧道工程为例,结合现场,详细分析、介绍了下穿隧道施工方案、原则、施工方法;提出了新建铁路隧道近距离下穿隧道交叉点附近施工爆破控制、防护方案,以及新建、既有隧道的监控量测、超前地质预报、安全性评估与评价等施工技术;解决了下穿隧道施工中既保证新建隧道施工安全,又保证既有隧道不受影响的问题。     

柴油机起动过程缸内窜机油现象的可视化研究

在单缸机上利用内窥镜技术观察到了起动过程中缸内有窜机油的现象。采用图像分析和试验验证相结合的方法,分析了缸内窜机油现象发生的原因,研究了转速和进气压力对柴油机起动倒拖工况下缸内窜机油现象的影响,研究了起动着火运行时缸内的窜机油现象以及炭烟排放特性。研究表明:柴油机高转速起动倒拖工况下,在压缩上止点前后以及排气上止点后均有机油窜入缸内;当转速升高时,窜入缸内的机油量增加;当缸内压力升高时,窜入缸内的机油量减少;在起动着火过程中,运行初期缸内出现窜机油现象,随着发动机运行时间增加,窜机油现象消失,炭烟减少。     

高速高频船舶舵机系统动态特性分析与研究

为船舶高速高频舵机的设计提供理论依据和技术支撑,提出了基于ADAMS、SIMULINK和AMESim的联合仿真分析的新方法,分析了船舶舵机分系统单元、非线性因素与整机系统动态特性的关系。基于ADAMS、SIMULINK和AMESim建立了船舶舵机系统联合仿真模型,从时频角度研究了变量泵、控制系统、反馈机构及传感器的特性,以及间隙、死区、泄露、灵敏度等非线性因素对舵机系统频响特性的影响关系和规律,得出了高速高频舵机设计的一般准则。     

带分布式动力吸振器基座振动传递特性研究

在弹性梁上等间距安装吸振器,构建带分布式动力器的基座系统,建立了Euler梁-吸振器-弹性支承耦合系统的力学模型。给出了子结构的导纳矩阵,推导了基座的动态特性传递方程,得到了基座系统的力传递率表达式,并详细讨论了系统参数对基座减振性能的影响。搭建了带分布式吸振器基座系统实验平台,对电阻应变式力传感器进行了标定,测试了基座的力传递率特性。数值仿真与实验测试结果均表明,带分布式动力吸振器基座在低频取得了优越的减振效果。