Comparative Analysis of Calculation Methods for Jacking Force of Jacking Pipes北大核心CSCD

Jacking force is the most important parameter in jacking pipe engineering, and reasonable calculation of jacking forces plays an important role in safe and smooth pipe jacking construction. There are many calculation methods for pipe jacking force at present, and the calculation results may be affected to some extent by different cal⁃ culation methods. For this reason, calculation methods of jacking force (frictional resistance) were collected and a comparative analysis was conducted with aspects to the advantages, disadvantages and applicabilities. The results show that as for the jacking force calculated by empirical formulae, the soil layer classifications corresponding to giv⁃ en frictional force per unit area and relevant factors to be considered are different, and the values of frictional force per unit area between pipe and soil in the same soil layer are also different; as for the jacking force calculated by theo⁃ retical formulae, the calculation methods for vertical earth pressure at crown are different and much effected by the pipe buried depth; as for the jacking force calculated by numerical simulation, the selected theories for the simula⁃ tion program and the construction factors to be considered during simulation are different. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Structural Optimization and Strength Analysis of the Lifting Arm of a Wet Shotcrete Spraying Unit北大核心CSCD

Wet shotcrete spraying units are widely used in underground engineering, for railways, highways, water conservancy and hydropower stations, municipal works, mining and military and other industries. Structural analysis and mechanical behavior optimization are conducted regarding the lifting arm of a TKJ series shotcrete spraying unit, and optimization of the hinge point position and working scope of the lifting arm is realized. The optimal layout scheme for the hinge force is given based on the Monte Carlo method, the hinge force of the lifting arm is improved for the mean and maximum values, and the maximum and average hinge force of the lifting cylinder decrease by 23.14% and 7.70%, respectively, compared with that of the original scheme. The static strength is checked using Ansys-Workbench for the optimized scheme, and the results show that the optimized scheme has a larger safety re-serve and that the structural design is more reasonable than the original scheme. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Experimental Study on Mechanical Behaviors of Prefabricated Column-Base Joint with Grouted Sleeves Connecting Longitudinal Reinforcements in Tunnels北大核心CSCD

In recent years, large shield tunnels with internal double-decked lanes have been developing rapidly in the field of highway tunnels, and prefabricated elements are increasingly adopted in internal structure. Based on the columns-base joint in Zhuguanglu tunnel, which is under construction, 2 full-scale specimens are designed for the quasi-static test, one specimen is connected with grout sleeve splicing and the other is cast in place. The test results show that: the bearing capacity of specimen with grout sleeve splicing is equal to that of cast-in-situ specimen, but its ductility and energy dissipation capacity are worse than that of the cast-in-situ specimen. And for the specimen with grout sleeve splicing, there exists crack concentration on the area above the sleeve. The crack width is too larger in this area. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Soil Body Deformation Caused by Construction of a Double-Line Shield Tunnel with Multiple Factors北大核心CSCD

Considering the influence of many factors (soil loss, frontal additional thrust, the friction force of the shield shell and the additional grouting force), a method for improving the uniform soil body movement model is pro-posed, and a mechanical calculation model is established to study the calculation method for soil body deformation caused by double-line parallel shield driving. Based on the Mindlin solutions of elastic mechanics, the theoretical solutions for soil body deformations caused by the last three factors are calculated; considering the uniform soil body movement model, the theoretical solutions for soil body deformations caused by soil loss are calculated, then the to-tal theoretical solutions for soil body deformations under multiple factors are obtained by means of superposition. The vertical surface settlement, vertical horizontal displacement, and vertical displacements of the soil body at different depths of Hangzhou Metro Line 1 are calculated to analyze the variation laws. Meanwhile the influential factors for horizontal displacement variation are studied. The research shows that with a change of depth, the settlement of the soil body changes within the scope of 10 to 13 m in the horizontal direction near where the maximum settlement occurs;the direction of the horizontal displacement of the soil body changes with a change of the positional relationship be-tween the calculation points and the tunnel; and with an increase of interval J for the two tunnels, the horizontal dis-placement of the soil body of a deep double-line tunnel decreases while the displacement near the surface changes slightly. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Formulating cargo inventory costs for liner shipping network design

This study examines how to incorporate the inventory costs of containerized cargoes into existing liner service planning models such that the designed networks could be improved while not causing extra modeling/computational burden. Two approaches are compared: (i) not considering the inventory costs at all and (ii) incorporating the inventory costs associated with onboard time and those related to transshipment by assuming a fixed connection time. The two models are compared with the ideal model capturing the exact inventory costs on a route choice problem and a capacity planning problem based on extensive randomly generated and practical numerical experiments. The results show that: first, ignoring the inventory costs in service planning models may lead to network design with much higher costs (poor network design decisions); second, in service planning models assuming weekly frequency, the inventory costs associated with onboard time could be formulated exactly, and those related to the connection time of weekly services could be approximated by assuming fixed connection time of 3.5 days for ports with 1 day’s minimum connection time and 4.5 days for ports with 2 days’ minimum connection time.     

长江口深水航道疏浚吹填一体化施工工艺

针对长江口地区近年来出现的新圈围造地工程,因条件限制或成本控制不宜设置储泥坑的情况,通过长兴潜堤工程实例,介绍长江口深水航道疏浚吹填一体化施工工艺,对工艺中的疏浚施工、艏吹抛锚定位以及吹泥施工等关键技术进行重点阐述。该工艺无需设置中转储泥坑,疏浚土一次性吹填上岸,并用于造地成陆,在长江口地区应用效果较好。     

桩侧及桩端后注浆对超长桩承载力的影响

以海南省某跨海大桥为工程背景,采用平行对比试验法,以桩侧桩端后注浆及施工桩长为变量,对3根超长灌注桩进行了竖向抗压静载试验,并对试验过程中试桩穿越各土层的分段侧摩阻力及桩端阻力进行测试。通过比对试验结果,分析桩侧桩端后注浆对超长灌注桩承载力性状、荷载传递规律及桩侧、桩端阻力发挥特性的影响。结果表明:进行桩侧、桩端后注浆能显著提高超长灌注桩的承载能力,减小桩基沉降;对于超长灌注桩,桩侧注浆对承载能力的增加效果远远大于桩端注浆;桩侧桩端注浆后,超长桩的荷载传递规律不变,依然是上部侧阻力先于下部侧阻力激发;桩侧注浆处土体表现出与桩体水泥胶结的性质,其抗剪强度较大且随位移增长而增加得更快。     

内河航道维护疏浚中岸坡稳定的控制办法

目前,维护疏浚已成为内河航道主要的养护方式之一。由于大多航道两岸的护岸建设年代久远,所以很难收集到完整的航道沿线护岸资料。为此,维护疏浚既要改善航道通航条件,又要保证航道沿线两岸岸坡稳定和建(构)筑物结构安全,成为维护疏浚设计和施工的重点和难点。结合上海市2010—2017年已实施的近百条内河航道维护疏浚项目的工程经验,总结维护疏浚过程中岸坡稳定控制办法。     

AASHTO概率模型在船桥碰撞风险评估中的应用

近年来随着航道等级的提升,设计通航船舶尺度增大,要求的通航净空尺度增加,桥区通航水域条件发生显著变化。桥梁存在船撞风险,需对船撞桥梁风险实施评估、为实施防撞设施工程提供依据。国内外因船舶撞击而导致桥梁垮塌或严重破坏的事故逐渐增多,平均每年就有一座大型桥梁因为船舶撞击而遭受严重破坏甚至倒塌。北江航道乌石至三水河口航段经整治由Ⅳ级提升为Ⅲ级后,桥梁存在船撞风险。以船撞桥概率模型(AASHTO)为研究方法,分析了整治河段清远北江二桥参数对船撞桥概率的影响,计算了船舶撞击桥梁各涉水桥墩的年撞击概率,确定了存在较大船撞风险的桥梁与涉水桥墩,建立了船撞桥损伤概率模型,分析桥梁各部位抗撞能力、桥梁各部位船舶撞击力及各部位的年撞击频率,得出通航孔桥墩的年撞击倒塌频率。     

柳江红花二线船闸输水系统布置与水力学模型试验研究

红花二线船闸是广西西江黄金水道首批重点建设项目,是提升柳江及西江通航能力、实现西江亿吨黄金水道的重要工程,其闸室规模与三峡船闸一致、工作水头近20 m、输水能量巨大。结合工程特点,选择了闸底长廊道侧支孔输水系统,设计了输水系统具体布置,并提出采用汇合廊道改善单边阀门运行输水流态的措施。通过比尺为1∶30的物理模型试验,对不同阀门运行工况下输水系统水力特性、闸室船舶停泊条件、进出水口水流条件等开展研究,推荐了使水力指标满足规范和设计要求的阀门开启方式。