Corrosion rate measurements in steel sheet pile walls in a marine environment

Corrosion of steel structures in the marine environment is a major problem. The deterioration of this kind of structures is costly and difficult to predict both when designing new structures and when estimating the remaining service life time for existing structures. The aim of this investigation was to find indicative values for the corrosion rate of steel sheet piles on the Swedish west coast. Such corrosion rates (mm/year) can be used both when designing new structures by oversizing the steel thickness and when estimating the bearing capacity of existing sheet pile structures. Earlier investigations on the corrosion rates along the Swedish east coast – with salinity from about 0.2% to 0.8% – are still used today as guidelines for the corrosion rate of all steel structures in the Swedish maritime environment even though the salinity on the west coast can be as high as 3.0%.Steel sheet pile wharfs located in the port of Halmstad on the Swedish west coast were inspected by ultrasonic measurements. Three wharf structures with a total length of about 700 m were inspected. None of the inspected wharfs had or have had cathodic protection. The thickness measurements of the steel sheet pile structures were performed by divers.The age of the three inspected sheet pile structures ranged from 36 to 51 years. The dimensions of the original sheet pile sections are known. One of the quay structures is located along a river. The salinity at all wharfs varied from low values at the surface to approx. 2% at the bottom (also in the river outflow).The measured average corrosion rates were in the same order as the design values in the European code. However, the results indicate increased corrosion rates about 1 m below the mean water surface and at the level of the propellers from the ships berthing the most frequented of the inspected wharfs, 3–6 m below water surface.The tolerances of steel sheet thicknesses – usually in the order of ±6% – are often neglected when investigating the remaining thickness in steel sheet piles. A simple calculation model shows that the sheet pile must be almost 50 years of age before an accurate estimation on the corrosion rate can be made, considering the tolerances, if the true original sheet pile thickness is not known.     

兰州市五人制足球运动开展现状调查分析

本文运用文献资料法、专家访谈法、问卷调查法、数理统计法对兰州市五人制足球运动的开展规模、教练员情况、场地设施、社会参与人群状况等问题进行调查分析,提出了针对性建议,旨在为进一步推动兰州市五人制足球的健康快速发展,同时促进兰州市足球运动的普及与提高尽一份力。     

In situ colonization of marine biofilms on UNS S32760 duplex stainless steel coupons in areas with different water qualities: Implications for corrosion potential behavior

In the presence of biofilms, stainless steels （SS） exhibits an increase in corrosion potential, called ennoblement. In the present study, the corrosion potential （Eco,） behavior of the duplex SS UNS S32760 was recorded simultaneously with the in situ marine biofilm formation in two areas at Arraial do Cabo, Southeastern Brazil. The biofilm at Forno Harbor （an anthropogenically disturbed area） was characterized by higher relative abundances of Bacteria at day 2, followed by diatoms （especially Navicula sp.） on day 10 and dinoflagellates on day 18, whereas no clear trend was recorded at Cabo Frio Island （an undisturbed area）. The ennoblement of Ecor values was site-dependent. In a complementary laboratory assay, biofilms were removed and the Eco values registered in sterile conditions for the subsequent 10 days and corroborated in situ results. Understanding biofilms and SS interactions has important implications for materials science and engineering decisions as well as helping to fill in imnortant gaps in this knowledge.     

中频电源逆变换相失败保护的研究

分析了并联逆变型晶闸管中频电源产生换相失败的原因,提出老换相失败保护新措施,经过实验和实践结果表明,新措施对各种原因产生的换相失败均有保护作用,且简单实用、效果良好。     

预应力锚索腐蚀原理与防腐技术方法初探

从腐蚀机理出发,阐述预应力锚索受腐蚀的现状及其防腐蚀的技术方法,提出浅显的建议。     

钢管桩三层熔结环氧粉末涂敷技术

杭州湾跨海大桥位于强潮河口浅海湾内,其基础工程处在潮差大、水流急、含砂量高和海水腐蚀性强等恶劣环境中,钢管桩防腐蚀采用三层熔结环氧粉末涂敷。钢管桩涂装生产线,日最大涂敷能力达6 800 m2,涂敷工艺处于国内领先水平,涂敷质量优于其他工艺。     

不等时距GM(1,1)模型在预测输气管道腐蚀中的应用

根据等时距GM(1,1)模型建立了不等时距GM(1,1)预测模型,该模型可应用于利用腐蚀指标的原始数据来预测以后的输气管道腐蚀情况。验证表明:不等时距灰色模型扩大了等时距灰色模型的应用范围,在小样本的情况下同样可以做出较准确预测,为输气管道的防腐提供了可靠的依据。     

车用电涡流缓速器试验方法的探讨

在分析比较国外相关的辅助制动法规和研究车用电涡流缓速器基本性能要求的基础上，探讨了车用电涡流缓速器的台架试验方法，研制了电涡流缓速器试验台。介绍了所研制试验台的工作原理，提出了试验方法和试验步骤。该试验方法的提出为国内制定电涡流缓速器相关标准提供了一定的理论依据。     

埋地输水管线牺牲阳极的阴极保护

通过对大连市引英入连输水应急工程土壤腐蚀性的现场勘察,为该工程钢质输水管网设计了牺牲阳极的阴极保护方法。30个月的实践证明,钢质输水管线经牺牲阳极的阴极保护后,整个阴极保护系统稳定,电位分布均匀,阳极保持较负的工作电位,提供较高的驱动电压,使管网处于良好的保护状态,防止了土壤的电化学腐蚀,达到了设计标准。