机床再生型切削颤振系统稳定性极限预测

推导了机床再生型切削颤振系统极限切削宽度随主轴转速变化的计算公式。提出了机床切削系统稳定性极限预测方法，就实验系统的切削稳定性极限进行了预测。预测结果与实验结果对比，最小极限切削宽度的预测误差为32％，与其相对应的主轴转速的预测平均误差小于。     

膨胀土路堑柔性挡墙边坡施工

在高速公路施工对生态环境保护要求越来越高的情况下,采用柔性挡墙的方案既能保证边坡的稳定,又能解决排水问题,是一种新型的膨胀土路堑边坡处理方法。     

Study on Bush Tree Growth in XLPE Using 3D PD Patterns

Exploitation of equipment with cross linked polyethylene (XLPE) insulationrequires its condition monitoring and diagnostic. Traditionally diagnostics of insulation is carriedout by means of partial discharge detection. However, such identification of a defect, forexample, void, inclusion or treeing, does not say about its danger from a point of view of fullinsulation gap breakdown and insulation construction failure. For this purpose a 29 kV CN-CVcable sample is studied. The experiment is based on research for determination of thedependencies between PD characteristics in XLPE upon time and three dimension PD patternsof corresponding treeing. The investigations were carried out by means of electricalmeasurement of PD current and simultaneous optical recording of treeing image. The needle-plane electrode is applied as the electrode. As a result,-q-n PD patterns which are used asthe bases to bush tree initialization and growth can be obtained. Test results show that PDpattern recognition can be applied as a powerful tool for recognizing electrical tree initializationand growth. This can make a good basis for on-line condition monitoring of high voltage powercable.     

挖方路堑坡度变更施工浅析

分析了挖方路堑施工中边坡坍塌的原因,并介绍了避免的方法及施工组织方面的技术措施。     

股动脉注射琥珀胆碱诱发肌梭传入对膈神经放电的影响

目的 观察肌梭传入活动是否对呼吸运动具有反射性调节作用。方法 实验用63只麻醉、制动、切断双侧颈迷走神经、肌松、人工呼吸的家兔,以膈神经放电作为呼吸观测指标,观察股动脉注射琥珀胆碱(Succinylcholine,Sch)诱发肌梭传入活动对呼吸的影响。结果 ①产生易化作用的有40例(63..49%),其中23例(36..51%)呈吸气延长效应;17例(26..98%)呈抑呼增频效应。产生抑制效应的有11例(17..46%),呈双相反应的4例(6..35%),8例(12..70%)无明显作用。②吸气延长效应主要表现为吸气时程(Ti)延长,呼吸时程(Te)有缩短趋势,但差异无显著性,Ti/Te比值增加,呼吸频率(RF)变化不明显;抑呼增频效应主要表现为Te缩短,Ti变化不明显,Ti/Te比值增加,RF加快。③肌注布比卡因破坏肌梭后,同剂量的Sch使上述呼吸易化效应明显减弱。结论 股动脉注射Sch诱发的肌梭传入活动对呼吸运动具有明显的增强作用。     

汉江崔家营航电枢纽泄水闸布置方案的优化

通过模型试验研究,得出了崔家营航电枢纽运行中的2个重要指标(正常蓄水位、最高通航流量)。对枢纽设计第Ⅰ方案中的泄水闸布置方案进行了修改,并得出推荐方案。     

急弯浅卵石滩航道整治技术研究

以坝油滩航道成功整治为例,论述了该浅滩河床演变特点、整治参数确定、整治原则及措施,卵石推移质动床模型设计及选沙,简要介绍了通过模型试验所获得的良好整治效果。     

基于因子分析模型的船舶企业节能减排评价及应用

以船舶类企业节能减排的评价及评价模型的应用为研究对象,基于因子分析法建立评价指标体系。通过数理计算,得出节能减排评价结果。针对结果进行分析,提出相关建议。     

低排量下并联甩泵分析与对策

乌鄯原油支干线乌鲁木齐输油首站低排量下给油泵特殊工况并联运行极易出现甩泵故障,给输油生产带来困扰和设备危害。通过对几年来甩泵分析,找出原因,制定对策（提高来油温度、缩小过滤器差压报警值、流量计并行、降低外输排量等）,减少了并联运行次数,避免了并联甩泵现象的再次发生,为密闭输油生产中合理配泵提供参考。     

White Layer of Hard Turned Surface by Sharp CBN Tool

IntroductionHard turning has been recognized as one of themost competitive clean machining technologies inreplacing of abrasive-based processes, with the de-velopment of high precision numerical machinetools and super-hardness tool material such as ce-ramic, CBN/PCBN (Cubic Boron Nitride/Poly-crystalline Cubic Boron Nitride)[1,2]. Hard turningoperation has shown geometrical flexibility, eco-nomics advantage, environmental friendliness, andsuperior surface integrity which is usually define…