A method for estimation of vehicle inertial parameters

In this paper, a new method is presented for estimating the current sprung mass inertial parameters of a vehicle, such as the mass, pitch and roll mass moments of inertia, and lateral and longitudinal centre of gravity locations. The method measures the sprung mass response when the vehicle is driven over an unknown and unmeasured random road profile. From these measurements, the equivalent free-decay responses are extracted and modal analysis techniques used to estimate the sprung mass natural frequencies, damping ratios and mode shapes. This information is combined with a simplified vehicle estimation model, least squares analysis and known equivalent stiffness parameters to estimate the vehicles’ inertial parameters. The results obtained from several simulation examples show that estimates of the inertial parameters generally have small relative errors.     

坝陵河大桥钢桁加劲梁合龙关键技术

为保证坝陵河大桥钢桁加劲梁架设的顺利进行,针对合龙过程中可能出现的竖向、横向、扭转偏差及跨中合龙段合龙口长度偏小,上、下弦合龙口长度偏差不同等难点,对合龙口特征、参数敏感性、各种偏差调整措施及合龙方案进行了研究.研究结果表明,采用在两桥塔处对梁端进行牵引措施可较好解决合龙口纵向长度不配匹的难点,保证钢桁梁合龙杆件安装顺利实施;采用合龙段前端吊索暂不安装并辅以临时吊索的措施,可有效解决上、下弦合龙口偏差问题,同时也可作为钢桁梁横向、扭转偏差的调整措施.     

采用灰色-马尔可夫耦合模型预测古树屋边坡变形

基于预测拟合值和实际监测值的相对误差划分不同的预测状态,利用马尔可夫链对灰色GM(1,1)预测值进行修正,计算得到边坡变形的范围和相应的预测值。以古树屋开挖边坡为研究对象,利用耦合模型对其变形进行预测,得到边坡的变形预测值为57.006 0 mm,预测的变形范围大小在56.845 8～61.755 4 mm之间。实例分析结果表明:与线性回归模型以及单纯灰色模型预测结果比较,采用灰色-马尔可夫耦合模型对开挖边坡变形进行预测的结果精度较好,且能较准确地预测边坡变形大小的范围。     

调整参数对柴油机性能的影响

基于摩擦磨损理论和柴油机的燃烧理论,分析了供油提前角、供油量、气门间隙、喷油压力等调整参数对柴油机性能的影响,并且提醒广大机械设备的使用者和维修人员,应重视对调整参数的检查与调整,以便保持柴油机的整机性能。     

基于断裂力学方法的冷再生基层材料疲劳寿命研究

利用断裂力学方法对冷再生基层材料的疲劳裂纹扩展进行分析,选择合适的断裂力学公式及参数,进而推导出疲劳寿命预估方程,分析方程中参数的取值并给出算例.通过算例得到的结果对影响疲劳寿命的因素进行分析,并与通过试验得到的数据进行对比.结果表明,用断裂力学方法预测含裂缝冷再生基层材料的疲劳寿命更合理.     

公轨两用桥钢混结合段的疲劳荷载参数研究

介绍菜园坝大桥钢混结合段轨道交通疲劳荷载参数确定方法。该方法基于轻轨车辆相遇符合正态分布的假设,采用雨流计数法统计出轨道交通造成钢混接头结构的疲劳内力幅值,然后按照Miner线性累积损伤准则等效成便于试验研究的等幅疲劳荷载。该方法可为同类桥梁设计和研究提供参考。     

车辆跟驰行为建模的回顾与展望

系统地回顾了跟驰理论60年的发展历程,依据建模思想将跟驰行为模型分为交通工程角度和统计物理角度。交通工程角度的跟驰模型包括刺激-反应类、安全距离类、心理-生理类及人工智能类模型;统计物理角度的跟驰模型包括优化速度模型、智能驾驶模型和元胞自动机模型。针对各类模型分别阐述了其建模思路、模型结构、参数标定及其扩展研究。最后,展望了跟驰行为建模的发展趋势与研究方向,为建立适合中国交通流特点的跟驰模型提供参考。     

长波作用下与KC数相关的柔性植被对海岸结构物受力的影响(英文)

Extreme coastal events require careful prediction of wave forces.Recent tsunamis have resulted in extensive damage of coastal structures.Such scenarios are the result of the action of long waves on structures.In this paper,the efficiency of vegetation as a buffer system in attenuating the incident ocean waves was studied through a well controlled experimental program.The study focused on the measurement of forces resulting from cnoidal waves on a model building mounted over a slope in the presence and absence of vegetation.The vegetative parameters,along with the width of the green belt,its position from the reference line,the diameter of the individual stems as well as the spacing between them,and their rigidity are varied so as to obtain a holistic view of the wave-vegetation interaction problem.The effect of vegetation on variations of dimensional forces with a Keulegan-Carpenter number(KC) was discussed in this paper.It has been shown that when vegetal patches are present in front of structure,the forces could be limited to within F*￡1,by a percentile of 92%,90%,55%,and 96%,respectively for gap ratios of 0.0,0.5,1.0,and 1.5.The force is at its maximum for the gap ratio of 1.0 and beyond which the forces start to diminish.     

利用改进的Lackenby进行船型变换与优化

基于FRIENDSHIP系统提出改进的Lackenby变换方法,改进的Lackenby变换使用B样条曲线,而不是采用传统的多项式进行船型变换。经过CFD计算验证,效果较好。