考虑疲劳损伤约束的车辆焊接结构轻量化设计

针对车辆焊接结构轻量化与疲劳寿命问题,提出考虑焊缝疲劳损伤约束的轻量化设计方法.采用国际焊接学会(IIW)的焊接接头与部件的疲劳设计评估标准,基于迈纳尔损伤累积理论,预测焊缝的疲劳累积损伤;以结构质量最小为目标,在应力、位移等常规约束基础上,加入焊缝疲劳累积损伤约束,建立了车辆焊接结构的轻量化模型.研究基于有限元分析的结构轻量化优化设计策略,采用试验设计方法对设计空间合理抽样,以样本数据建立近似响应模型,采用数值优化算法寻优,提高复杂工程问题优化计算的效率.利用该方法对某焊接构架进行了考虑焊缝疲劳损伤约束的轻量化设计,采用均匀设计法对14个设计变量进行50次试验,以样本数据及响应值建立径向基神经网络近似模型,采用序列二次规划算法进行优化设计,质量减轻12.5%.对实例的计算证明该方法的可行性与实用性.     

Evaluation of detection sensitivity and count performance of advanced vehicle detection technologies at a signalized intersection

This article evaluates the stop-bar detection and count performance of three advanced vehicle detection sensors under various environmental conditions at a signalized intersection. Continuing advancements to vehicle detection technologies and improvements to their detection capabilities to overcome issues from impacting conditions necessitates testing the performance of new and upgraded sensor products to evaluate their performance and identify the most suitable products for various climates and weather conditions. The three evaluated sensors were Autoscope Encore video, Iteris Vantage Edge 2 video, and Wavetronix SmartSensor Matrix microwave sensors. The three sensors performed with high detection sensitivity during ideal environmental conditions with up to 99.9% detection accuracy levels and are suitable for traffic monitoring centers that rely on remote access to the monitored sites and the collected data. However, they were affected by some extreme adverse weather conditions, mainly daytime and nighttime snow, daytime fog, dawn lighting, and strong winds (for high mounted devices). The selection of a sensor product will depend on the type of application and the priority given to the type of traffic data being collected. Overall, the Iteris video sensor performed with the highest detection sensitivity levels, with the Wavetronix Matrix microwave sensor performing similarly under most conditions (14 of 19 evaluated conditions). Autoscope video provided the highest count accuracies and also provides a much broader data collection capability. The results of this study will help transportation agencies in selecting suitable vehicle detection sensor technologies for future installations within their jurisdiction and improved data collection.     

浅析汽车自动变速器故障检测与维修

自动变速器与手动变速器相比较,它所关联的知识面更加的广泛,机械的结构也更加的复杂,控制的原理也更加的有难度,所以在自动变速器故障检测以及维修的要求也会更高。自动变速器如若发生故障之后,需要专门的工具以及按照相关的程序进行检测维修,才能及时准确的找出故障问题,并且能够降低返修机率的发生。本文主要对汽车自动变速器的工作原理介绍,并且提出了相关的故障形成原因,最后也给出了排除故障以及维修方法。     

列控系统动态检测计划管理辅助工具的研究与实践

列控系统动态检测计划的编制与管理,贯穿了整个高速铁路列控系统动态检测的全过程,从测试前期的计划编制,到测试过程中计划的改动,再到测试结束后计划的统计、查询。传统的计划管理方法对动态检测序列的管理通常比较分散,不容易查询,提出一种基于Excel VBA实现的高速铁路列控系统动态检测计划管理辅助工具,利用Excel非常强大的数据统计与数据处理能力,实现对动态检测计划的增、删、改、查、核对与输出功能,并通过实践,验证计划管理辅助工具的有效性与可靠性。     

采用计轴系统叠加轨道电路解决分路不良的探索与应用

主要针对站内轨道电路分路不良问题进行实际分析,利用计轴技术的优点,采用计轴系统叠加轨道电路作为解决轨道电路分路不良的方案。计轴系统通过对轨道区段两端计轴检测点统计的轴数进行比较,确认区段是否空闲,并控制相应的轨道继电器、实现自动检查区段状况;同时,合理地与既有电气集中设备有机结合,彻底解决分路不良问题,最大限度地保证行车安全。     

浅谈城市桥梁火灾后修复设计研究

合理利用城市桥下空间,对于充分利用道路空间资源、节省城市土地资源具有重要现实意义,也越来越引起人们的关注。近年来,各地区因为违规占用桥下空间引起的火灾越来越频繁。现结合实际工程,浅谈城市桥梁火灾后如何在保证交通不中断的情况下快速修复受损结构。     

Sensitivity analysis of the probabilistic damage stability regulations for RoPax vessels

In the light of the newly developed harmonised probabilistic damage stability regulations, set to come into force in 2009, this article presents a systematic and thorough analysis of the sensitivity of the Attained Subdivision Index with reference to a wide range of related design parameters. The sensitivity of the probabilistic regulations was investigated for a typical large RoPax vessel, with variation of parameters, such as the number, positioning and local optimisation of transverse bulkheads; the presence and position of longitudinal bulkheads below the main vehicle deck; the presence of side casings; and the height of the main deck and double bottom. The effects of water on deck and of operational parameters (draught, centre of gravity and trim) were also investigated. The results of the study, presented in graphical form, can provide valuable assistance to the designer when determining subdivision characteristics at the very early stage of the design process, resulting in optimal, efficient and safe ships.     

PHC管桩基础在住宅小区工程中的应用

以廊坊华元和庭小区PHC管桩基础施工应用为依托，分析管桩基础施工过程中的一些方法措施及检测结果。采用PHC管桩基础，在工程质量、环境、经济、施工工期等方面都是城区地基处理的一种好方法。     

Fault-tolerant control of heavy-haul trains

The fault-tolerant control (FTC) of heavy-haul trains is discussed on the basis of the speed regulation proposed in previous works. The fault modes of trains are assumed and the corresponding fault detection and isolation (FDI) are studied. The FDI of sensor faults is based on a geometric approach for residual generators. The FDI of a braking system is based on the observation of the steady-state speed. From the difference of the steady-state speeds between the fault system and the faultless system, one can get fault information. Simulation tests were conducted on the suitability of the FDIs and the redesigned speed regulators. It is shown that the proposed FTC does not explicitly worsen the performance of the speed regulator in the case of a faultless system, while it obviously improves the performance of the speed regulator in the case of a faulty system.     

灌浆技术处治旧水泥砼路面病害的研究

水泥砼路面接缝较多，受超载影响较大，易发生脱空、唧泥、裂缝等早期病害，从而导致路面的破损。因此，搞好水泥砼路面的养护，治理与预防脱空、唧泥等病害，延长公路的使用寿命并改善其通行能力，具有十分重要的意义。