The design of single allocation incomplete hub networks

The hub location problem deals with finding the location of hub facilities and allocating the demand nodes to these hub facilities so as to effectively route the demand between any origin–destination pair. In the extensive literature on this challenging network design problem, it has widely been assumed that the subgraph induced by the hub nodes is complete. Relaxation of this basic assumption constitutes the starting point of the present work. In this study, we provide a uniform modeling treatment to all the single allocation variants of the existing hub location problems, under the incomplete hub network design. No network structure other than connectivity is imposed on the induced hub network. Within this context, the single allocation incomplete p-hub median, the incomplete hub location with fixed costs, the incomplete hub covering, and the incomplete p-hub center network design problems are defined, and efficient mathematical formulations for these problems with O(n³) variables are introduced. Computational analyses with these formulations are presented on the various instances of the CAB data set and on the Turkish network.     

Research and application of non-clay low damage temporary bridging drilling/ completion fluids system

Following the basic theory of protecting gas-reservoirs from damage with the temporary bridging technology, inert calcium carbonate (CaCO3) particles, whose diameter is consistent with the size of pores or apertures in the reservoir, were selected as the bridging agent, and modified resolvable starch was selected as filtration loss reducing particles to form the non-clay low damage temporary bridging drilling/completion fluids system (NLTDFS). Under the simulated condition of the well bottom during real drilling, NLTDFS was used to conduct dynamic and static damage experiments of cores for 48 hours, respectively, and then the experimented cores were permeated with pure nitrogen from the undamaged end to the damaged one to measure their recovery of permeability. The results showed that the permeability recovery rate of the core reached 90% or so, and the damaged depth was less than 1 cm, which demonstrates that NL TDFS has higher temporary bridging effectiveness and lower damage to the gas-reservoir than other drilling fluids system. NLTDFS has been used to drill many horizontal wells, and four of them have obtained high yield of natural gas. The yield of natural gas of LPl well reached 85 X 104 m3/day after completion with the rump pipe. The formation of the stable well wall and smooth drilling led to an API loss less than 4 mL and an HTHP loss less than 15 mL.     

某型散货轮主机膨胀节损坏原因及优化改进措施

文章就某型散货轮主机膨胀节损坏原因进行分析，从设计和膨胀节的本身入手展开研究，找出损坏原因所在，对膨胀节的选型和布置进行了改进和优化。     

沥青路面水损害的影响因素和发展过程

针对沥青路面水损害问题,分析总结了引发水损害的影响因素,并探讨了水损害的发展过程, 以期明确沥青路面水损害现象的形成机理.     

公路工程试验检测方法的原理及应用

试验检测是公路工程中重要的管理方式,主要是对工程项目进行检测,是工程质量管理中的重要环节。文章介绍了公路工程试验检测方法的原理及应用情况。     

小波变换在结构损伤识别中的应用研究

针对土木工程结构的复杂性和数据的不完备性，以小波分析为理论基础，结合多尺度分析理论和数值模拟，对结构损伤识别进行了研究。主要分析了结构动力参数在损伤后的变化特征，对单自由度框架的加速度信号进行小波分析，得到结构损伤的时刻；研究了利用空间域信息对结构损伤位置的识别问题，对带裂缝悬臂梁的变形曲线进行小波变换，判定了结构损伤位置。     

跨境供应链网络海外仓的鲁棒性选址模型及算法

新经济形态下，全球政治、经济形势瞬息万变，多种人为和自然因素导致商业供应链的生存环境日益严峻. 跨境供应链网络作为典型的时效性和运营环境等都具有极大不确定性的复杂网络，研究其鲁棒性问题具有一定的理论意义和实际应用场景. 首先阐明了跨境供应链网络的内涵，认为海外仓的选址优化是控制网络鲁棒性的重要手段；随后基于最小最大后悔值构建了海外仓的鲁棒性选址模型，利用情景松弛算法对模型进行求解. 算例分析结果证明，所构建的海外仓鲁棒性选址模型及算法适用于跨境供应链网络情景.     

重载区段接触网电气设备烧损原因分析

对大秦线重载区段接触网电气设备烧损问题进行分析,针对烧损原因提出设备改造方案和监测防范措施,有效的防止了重载区段接触网电气设备烧损问题,提高重载区段接触网供电设备的可靠性。     

Development of a new time domain-based algorithm for train detection and axle counting

This paper presents an innovative train detection algorithm, able to perform the train localisation and, at the same time, to estimate its speed, the crossing times on a fixed point of the track and the axle number. The proposed solution uses the same approach to evaluate all these quantities, starting from the knowledge of generic track inputs directly measured on the track (for example, the vertical forces on the sleepers, the rail deformation and the rail stress). More particularly, all the inputs are processed through cross-correlation operations to extract the required information in terms of speed, crossing time instants and axle counter. This approach has the advantage to be simple and less invasive than the standard ones (it requires less equipment) and represents a more reliable and robust solution against numerical noise because it exploits the whole shape of the input signal and not only the peak values. A suitable and accurate multibody model of railway vehicle and flexible track has also been developed by the authors to test the algorithm when experimental data are not available and in general, under any operating conditions (fundamental to verify the algorithm accuracy and robustness). The railway vehicle chosen as benchmark is the Manchester Wagon, modelled in the Adams VI-Rail environment. The physical model of the flexible track has been implemented in the Matlab and Comsol Multiphysics environments. A simulation campaign has been performed to verify the performance and the robustness of the proposed algorithm, and the results are quite promising. The research has been carried out in cooperation with Ansaldo STS and ECM Spa.     

施工便道用漫水桥结构设计

为保证某漫水桥的正常通行,在考虑施工现场条件的基础上,设计了一种施工便道用漫水桥结构。介绍该漫水桥的结构设计,对其结构安全进行检算,并从桥位、桥面高程、桥型、桥台和行车道等方面总结设计思路。结果表明,该施工便道用漫水桥结构设计总体上安全可靠,将该漫水桥应用于现场施工,使用期间漫水桥结构稳定,效果良好。