某型导弹快艇装备器材保障管理系统的设计与实现

对系统的总体结构进行了设计,并基于此结构,根据器材管理信息和业务流程,选择了合理的硬件和软件平台,运用软件工程原理和面向对象的设计思想,采用网络技术、Oracle数据库和容错技术,实现了对系统的功能模块、软界面和数据库的设计。系统的研究严格遵循军用软件开发规范,整个软件开发过程规范化、系统化、工程化,保证了系统的实用性、先进性、可靠性和安全性。测试结果也充分表明,该系统基本能满足系统的功能要求和设计要求。     

基于信息系统的炮兵指挥信息能力评估研究

为提高基于信息系统的体系作战能力,对炮兵指挥信息能力构成进行了全面分析,建立了指挥信息能力评估指标体系,结合指挥信息对抗能力指标体系实例,引入云重心评判法对其进行科学评估,验证该方法的有效性,并得出结论为我军炮兵指挥信息系统建设提供了有益参考。     

盾构始发与到达设计与施工决策分析系统研制

为了控制盾构施工的风险和提高盾构设计与施工的决策效率,采用资料分析、理论计算和软件开发的方法,对盾构始发与到达施工决策相关基础与应用问题进行了全面研究。得到以下研究成果:1)提出盾构始发和到达的风险分类,并以此为基础,研究了不同加固方案下盾构始发与到达施工存在的风险问题;2)通过对端头地层稳定性的研究,提出端头地层稳定性分析与判别方法,构建始发与到达加固方案知识库;3)建立一个包含100个工程的案例数据库,为决策系统提供了数据库支撑;4)基于工程案例数据库,研制具有地层稳定性判别、加固方法选择、加固范围确定、反力架支撑验算、风险分析、施组设计标准化等功能的盾构始发与到达设计与施工决策辅助系统,有助于工程设计与施工方案的科学分析与决策。     

高精度随动系统的变结构控制

陀螺稳定平台控制系统是控制平台框架系统快速跟踪陀螺仪的高精度随动系统,是保证平台正常工作和精度的重要系统。用传统的PID调节器可以满足工作在系统线性区的要求。由于放大器、电机等存在饱和特性,因而在系统启动和随大的干扰产生大偏角时,系统将进入非线性区,PID调节器将难以满足稳定性的要求。滑模变结构控制器对非线性具有很好的适应性,对系统启动初始偏角没有限制要求,本文将应用变结构控制的方法对平台的控制系统进行设计。     

SiC功率器件在轨道交通行业中的应用

为解决轨道交通牵引及辅助系统的轻量化等问题,宽禁带半导体器件如SiC器件的应用需求越来越大。SiC材料具有禁带宽度大、击穿场强高、电子饱和漂移速率快等特性,能满足在中大功率、高温、高频条件下工作的应用要求。简述了SiC器件相比传统硅基器件的突出优势及商业化和实验室研发情况,介绍了SiC功率器件在轨道交通行业中的发展现状,同时对其在未来轨道交通装备业的发展提出了建议和展望。     

Fatigue damage estimation in non-linear systems using a combination of Monte Carlo simulation and the First Order Reliability Method

For non-linear systems the estimation of fatigue damage under stochastic loadings can be rather time-consuming. Usually Monte Carlo simulation (MCS) is applied, but the coefficient-of-variation (COV) can be large if only a small set of simulations can be done due to otherwise excessive CPU time. The reason is that the fatigue damage estimation is very sensitive to the largest values from the simulations. The paper suggests the additional use of the First Order Reliability Method (FORM) to get a better estimation of the tail in the distribution of the estimated fatigue damage and thereby reducing the COV. For a specific example dealing with stresses in a tendon in a tension leg platform the COV is thereby reduced by a factor of three.     

Towards data-driven car-following models

Car following models have been studied with many diverse approaches for decades. Nowadays, technological advances have significantly improved our traffic data collection capabilities. Conventional car following models rely on mathematical formulas and are derived from traffic flow theory; a property that often makes them more restrictive. On the other hand, data-driven approaches are more flexible and allow the incorporation of additional information to the model; however, they may not provide as much insight into traffic flow theory as the traditional models. In this research, an innovative methodological framework based on a data-driven approach is proposed for the estimation of car-following models, suitable for incorporation into microscopic traffic simulation models. An existing technique, i.e. locally weighted regression (loess), is defined through an optimization problem and is employed in a novel way. The proposed methodology is demonstrated using data collected from a sequence of instrumented vehicles in Naples, Italy. Gipps’ model, one of the most extensively used car-following models, is calibrated against the same data and used as a reference benchmark. Optimization issues are raised in both cases. The obtained results suggest that data-driven car-following models could be a promising research direction.     

Stability of transportation networks under adaptive routing policies

Growing concerns regarding urban congestion, and the recent explosion of mobile devices able to provide real-time information to traffic users have motivated increasing reliance on real-time route guidance for the online management of traffic networks. However, while the theory of traffic equilibria is very well-known, fewer results exist on the stability of such equilibria, especially in the context of adaptive routing policy. In this work, we consider the problem of characterizing the stability properties of traffic equilibria in the context of online adaptive route choice induced by GPS-based decision making. We first extend the recent framework of “Markovian Traffic Equilibria” (MTE), in which users update their route choice at each intersection of the road network based on traffic conditions, to the case of non-equilibrium conditions, while preserving consistency with known existence and uniqueness results on MTE. We then exhibit sufficient conditions on the network topology and the latency functions for those MTEs to be stable in the sense of Lyapunov for a single destination problem. For various more restricted classes of network topologies motivated by the observed properties of travel patterns in the Singapore network, under certain assumptions we prove local exponential stability of the MTE, and derive analytical results on the sensitivity of the characteristic time of convergence to network and traffic parameters. The results proposed in this work are illustrated and validated on synthetic toy problems as well as on the Singapore road network with real demand and traffic data.     

Development of control models for the planning of sustainable transportation systems

Planning of sustainable transportation systems requires integration of multiple systems while considering a holistic approach. A limited amount of research has been conducted that simultaneously considers all the transportation, economic activity, environmental and social effects. The proposed research envisages incorporating considerations related to sustainability and providing solutions to stakeholders in policy making. In this paper, a dynamic model for planning and development of sustainable transportation systems is presented. This is given by a system of three nonlinear differential equations representing the dynamics of the three independent states, namely, transportation, activity, and environmental systems. A policy scenario considering investment in energy efficient technologies and its effects on the states is discussed to assist making investment decisions. Optimal control techniques are used to design the controls. The results show that it is possible to formulate an optimal control to achieve the desired target. Numerical results, based on actual parameters, are presented to illustrate the long-term trends of the states. The methodology discussed in this paper will be helpful to decision makers in making optimal decisions. The contribution of this research work is the introduction of a systems and controls methodology to develop optimal policies for the design of sustainable systems.     

船舶智能设计浅析

随着《中国制造2025》提出综合实力进入世界制造强国前列的制造强国战略目标,基于新一代信息技术产业的智能制造工程正在各个产业迅速推进。但作为制造强国基础的智能工厂并不仅仅局限于智能制造,还应该包括智能设计、全范围的智能物流和智能管控等。其中智能设计是缩短产品研制周期的关键,通过智能设计产生最优化的数据、高正确率数据是缩减制造周期降低制造成本的关键。文章简要剖析智能设计在船舶行业的应用,基于现状展望智能设计的发展方向,并分析了发展智能设计所需的数据系统建设。