Numerical and experimental analysis of bow flare slamming on a Ro–Ro vessel in regular oblique waves

A method for the prediction of slamming loads on ship hulls is presented and validated for a 20-knot, 120-m car carrier. A nonlinear strip theory is used to calculate the relative motions of ship and wave. The relative vertical and roll velocities for a slamming event are given as input to the slamming calculation program, which is based on a generalized two-dimensional Wagner formulation and solved by the boundary element method. The method is fast and robust. Model tests of a car carrier have been carried out in regular head, bow, and bow quartering waves of various heights. Slamming on two panels in the upper part of the bow flare has been studied. It has been found that the water pile-up around the bow due to the forward speed of the vessel significantly increases the slamming pressures. A simplified way of including this effect is presented. When the calculated slamming pressures are corrected for 3D effects, they compare well with the measured data. Since the effect of the wave elevation due to the forward speed and the effect of three-dimensional flow act in opposite directions, excluding both of them produced results that also agreed quite well with the experiments, especially for the most severe slamming events.     

体现“湖北制造”经济特色的数控技术专业共享型教学资源库建设

探讨了立足"湖北制造"区域经济特色,依托先进资源管理平台,构建共享、开放型数控技术专业资源库的目标、思路、内容、步骤、规格等核心问题。提出了涵盖2个专业方向、针对15门核心课程、兼顾3个学习层次、打造7个特色模块,建设8种类型资源包、设计多种表现形式的资源库建设方案,以此推动专业建设和课程建设,满足教与学不同方面、多种层次的需求。     

How well a single-track linear model captures the lateral dynamics of long combination vehicles

ABSTRACT

The effect of centre-of-gravity heights on the high-speed performance measures of long combination vehicles including truck with double centre-axle trailers, Nordic, and A-double combination vehicles is investigated. The high fidelity three-dimensional models, used in this research, are validated against physical test data. These models are often accurate in terms of the actual dynamic behaviours of the vehicle. On the other hand, the simple yaw-plane single-track models with linear tires require less number of vehicle parameters. In this paper, it is investigated how accurate the estimations of performance measures are at high forward speeds by such single-track linear (STL) models. The influence of load height is especially studied. The high-speed performance-based standard or PBS measures considered are rearward amplifications of both lateral acceleration and yaw velocity; lateral load transfer; yaw damping and high-speed transient offtracking. The results show that tire relaxation has a large effect and it is rather easy to add to an STL model, so it is assumed to be modelled in STL. With realistically high payload and a required accuracy of PBS measures of approximately 10%, only the accuracy of rearward amplification of yaw velocity calculated by the frequency response is fulfilled by the STL. With low payload, the same statement is valid, but with around 5% in required accuracy. The roll dynamics effects are more important than the tire non-linearities.     

中小型车站Smart2.0系统的方案与安全性分析

作者介绍了适合中小型车站Smart 2.0系统的一种可行方案,通过对该系统安全性的分析,该方案具有结构简单、安全可靠、节约投资等特点。     

故障树分析法在柴油机遥控系统电路故障诊断中的应用

应用故障树分析法对柴油机遥控系统进行定性分析,并很好的解决了知识库建立和知识获取的难题,保证了故障诊断的完整性和可靠性.成功的将故障定位到回路,解决了系统故障诊断的难点.     

公路隧道运营典型风险辨识

为加强对公路隧道运营风险的辨识、改善和优化公路隧道运营安全，降低重大隧道事故对人员伤亡、隧道结构、设备和经济收益的损失，通过隧道事故调研和大数据技术，收集近些年在全国范围内发生的802起公路隧道事故，对公路隧道自身特性和隧道事故的时间、空间、类型、诱因等特征进行分析。研究结果表明： 1)外界因素对隧道事故影响较大，在高温和车流量较大的环境下，事故发生较多； 2)特长隧道和长隧道的事故数远高于短隧道和中隧道； 3)小型车是隧道内发生事故的主要车型，事故原因多是驾驶员违规驾驶，事故类型多为追尾事故； 4)火灾事故的诱因多为车辆自身故障，其中危化品泄露多为易燃液体泄露。     

Development of advanced driver assistance systems with vehicle hardware-in-the-loop simulations

This paper presents a new method for the design and validation of advanced driver assistance systems (ADASs). With vehicle hardware-in-the-loop (VEHIL) simulations, the development process, and more specifically the validation phase, of intelligent vehicles is carried out safer, cheaper, and is more manageable. In the VEHIL laboratory, a full-scale ADAS-equipped vehicle is set up in a hardware-in-the-loop simulation environment, where a chassis dynamometer is used to emulate the road interaction and robot vehicles to represent other traffic. In this controlled environment, the performance and dependability of an ADAS is tested to great accuracy and reliability. The working principle and the added value of VEHIL are demonstrated with test results of an adaptive cruise control and a forward collision warning system. On the basis of the ‘V’ diagram, the position of VEHIL in the development process of ADASs is illustrated.     

自动拨号文件传输系统

本系统是利用电话网及调制解调器通过自动拨号来实现计算机之间的文件自动传输,并使用SQL语言在传输过程中自动形成和修改有关的记录文件,此外还具有系统设置、记录查询、统计、传输过程中的实时监控等功能,为系统设计了一个多媒体演示软件.     

基于VC＋＋实现公路工程试验数据的处理系统

介绍了在公路工程试验室管理中,运用Visual VC＋＋实现公路工程试验室数据处理系统的方法,其中包括数据存储、窗口界面、报表打印等主要功能的构成。叙述了系统总体设计、数据存储、菜单设计、工具栏设计、用户窗口设计及报表打印的步骤和方法。     

某型舰炮远程故障诊断专家系统的设计与实现

文章针对某型舰炮的工作原理以及故障特点,结合人工智能中专家系统的知识,采用的B／S模式下jsp＋servlet技术来设计出一套该型舰炮的远程故障专家系统。在某型舰炮维修的过程中,该文所设计的软件能方便快速的解决故障,在武器装备维护中具有重要的军事意义。