大神高速公路穿越矿区选线思路

结合山西省大营至神池高速公路设计经验,对矿区公路的特点进行了总结归纳,并以实际工程为例,提出了选线设计的总体原则和主要思路,供设计人员参考。     

深度模拟器液压系统仿真研究

介绍了深度模拟器总体结构及工作原理,针对深度模拟器控制系统中PID算法及其相关参数进行了仿真研究。以深度模拟器液压系统为模型,利用AMESim仿真软件工具,对整个液压系统进行了仿真分析并对系统各元器件的参数进行了优化,为深度模拟器的进一步研究提供了理论基础。     

Integrated approach to determine highway flooding and critical points of drainage

Among the natural hazards that threaten transportation infrastructure, flooding represents a major hazard to highways as it challenges their design, operation, efficiency and safety. In extreme cases, it may lead to massive obstruction of traffic and direct damages to the road structures themselves and indirect damages to the economic activity and development of the region. To enable the prevention of such consequences, and the proposition of adaptive measures for existing infrastructure, this paper presents an integrated framework to identify the most vulnerable points to flooding along a highway. This is done through the combination of remote sensing information (e.g. LiDAR based Digital Elevation Model, satellite imagery), a high-quality dataset, and a quasi-2D hydrodynamic model. The forcing condition is defined using a hyetograph associated to a storm with duration of 1 day and return period of 100 years. The selected highway is located in the Mexican state of Tabasco, where extreme precipitation events and floods are frequent. Results demonstrate the ability of the methodology to identify critical water levels along the road (h > 1.50 m) at those locations where flooding has been experienced, as well as points of inspection for the highway drainage. These locations were visited in the field and maintenance problems were detected that do increase its level of exposure. We show that this framework is useful for the generation of a flood management strategy to the analyzed highway, which includes an optimum location of adaptive measures to an anticipated more intense future climate.     

桥墩及桩基形式对墩底平转施工转盘设计的影响

以新建福厦(福州—厦门)高速铁路17500 t转体刚构为背景,采用实体有限元方法分析了不同桥墩类型及桩基布置对墩底平转转体中转盘受力的影响,并对桥墩及桩基进行了优化。结果表明:实体墩对上转盘受力最有利,其次是空心墩,最不利的是双薄壁墩;增加墩底实体段能够有效降低空心墩、双薄壁墩上转盘的主拉应力;随着墩底实体段高度的增加,主拉应力降低的幅度逐渐变小;球铰正下方有桩基时对下转盘底部受力更加有利;距离球铰中心越远,桩基受力越小,适当增加中桩桩径,可使各桩基应力状态更加均衡。     

Planning hierarchical urban transit systems for reductions in greenhouse gas emissions

Public transit systems with high occupancy can reduce greenhouse gas (GHG) emissions relative to low-occupancy transportation modes, but current transit systems have not been designed to reduce environmental impacts. This motivates the study of the benefits of design and operational approaches for reducing the environmental impacts of transit systems. For example, transit agencies may replace level-of-service (LOS) by vehicle miles traveled (VMT) as a criterion in evaluating design and operational changes. In previous work, we explored the unintended consequences of lowering transit LOS on emissions in a single-technology transit system. Herein, we extend the analysis to account for a more realistic case: a transit system with a hierarchical structure (trunk and feeder lines) providing service to a city where demand is elastic. By considering the interactions between the trunk and the feeder systems, we provide a quantitative basis for designing and operating integrated urban transit systems that can reduce GHG emissions and societal costs. We find that highly elastic transit demand may cancel emission reduction potentials resulting from lowering LOS, due to demand shifts to lower occupancy vehicles. However, for mass transit modes, these potentials are still significant. Transit networks with buses, bus rapid transit or light rail as trunk modes should be designed and operated near the cost-optimal point when the demand is highly elastic, while this is not required for metro. We find that the potential for unintended consequences increases with the size of the city. Our results are robust to uncertainties in the costs and emissions parameters.     

“穷举法”在油船货油舱分舱优化设计中的应用

为实现油船货油舱分舱优化,以一艘大型油船为例,根据MARPOL公约和共同结构规范(HCSR)的要求,在主尺度、船型和货油舱总舱容确定的情况下,以最小静水弯矩为优化目标,基于"穷举法"编制优化货油舱横舱壁位置的应用程序。实际应用结果表明,该程序可运用到油船的分舱优化中,能达到快速、合理地分舱,提高设计效率的目的。     

Integrated airline planning: Robust update of scheduling and fleet balancing under demand uncertainty

The airline schedule planning problem is defined as the sequence of decisions that need to be made to obtain a fully operational flight schedule. Historically, the airline scheduling problem has been sequentially solved. However, there have already been many attempts in order to obtain airline schedules in an integrated way. But due to tractability issues it is nowadays impossible to determine a fully operative and optimal schedule with an integrated model which accounts for all the key airline related aspects such as competitive effects, stochastic demand figures and uncertain operating conditions. Airlines usually develop base schedules, which are obtained much time in advance to the day of operations and not accounting for all the related uncertainty. This paper proposes a mathematical model in order to update base schedules in terms of timetable and fleet assignments while considering stochastic demand figures and uncertain operating conditions, and where robust itineraries are introduced in order to ameliorate miss-connected passengers. The proposed model leads to a large-scale problem which is difficult to be solved. Therefore, a novel improved and accelerated Benders decomposition approach is proposed. The analytical work is supported with case studies involving the Spanish legacy airline, IBERIA. The presented approach shows that the number of miss-connected passengers may be reduced when robust planning is applied.     

连续配筋混凝土路面的技术应用

介绍连续配筋混凝土路面的基本概念,说明我国CRCP的结构设计理论和设计方法,可为该技术在我国的推广应用提供理论支撑.     

铁路路基动态变形模量的数值模拟分析

介绍铁路路基动态变形模量理论计算公式的推导及动态变形模量的测试原理,采用有限元软件模拟动态变形模量的测试过程,分析承载板与土体接触压力、路基动态变形模量的影响因素,并计算动态变形模量的有效测试深度.结果表明:在承载板中心一定范围内,接触压力模拟结果较理论计算值大;土体的动弹性模量对接触压力影响很小,可以忽略;路基动态变形模量测试冲击荷载作用下,土体只发生弹性变形;动态变形模量与土体动弹性模量呈线性关系,路基动态变形模量的模拟结果大于理论计算值;土体的泊松比对动态变形模量影响较小;动态变形模量有效测试深度建议取0.5~0.6 m.     

福州轨道交通建设安全管控平台的设计与应用

福州城市轨道交通建设规模不断增大，复杂的地质、环境条件以及众多工种施工的交叉作业和人员活动，给安全生产带来挑战。针对建设全过程安全管控的具体业务关系和需求分析，梳理和固化工作岗位、职责、流程、响应、整改等安全管理的事项和要求，强化对管控过程的追溯和考核管理。研究信息平台的业务需求、平台架构、网络拓扑、功能模块、数据库设计方法和实现思路，利用Ssm框架、Quartz框架、Encache技术以及SQLServer数据库技术，设计开发基于B/S模式的城市轨道交通安全管控信息系统，应用于在建的5条线路。信息平台的应用，可实现安全管理的标准化、科学化和精细化，极大地提高管理水平和工作效率。