Model Test on Grouting Law in Dynamic Water-Rich Sand Layers by the Electric Resistance Method北大核心CSCD

In order to study the diffusion law of grouting slurry in the water-rich sand layer under flowing water conditions, a grouting test model consisting of a main test system, a grouting system, and a measurement system was developed. And for detecting the diffusion scope of the grouts, a new resistivity method was proposed. It is found that the relationship between grouting pressure and grouting rate during the test is strong. Under hydrodynamic conditions, the grouting slurry diffuses elliptically. Due to gravity and the effect of the upper water flow, the center of gravity of the ellipsoid is below the grouting outlet, and the grouting effectively improves the physical and mechanical properties of water-rich sand bodies. At the same time, the resistivity method has a good application effect on the detection of grouting diffusion range. The range of slurry diffusion obtained by the resistivity method is basically consistent with the boundary of the stone body after excavation, indicating that the resistivity method is reliable for detection of grouting range in dynamic water-rich sand layer. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Formulating cargo inventory costs for liner shipping network design

This study examines how to incorporate the inventory costs of containerized cargoes into existing liner service planning models such that the designed networks could be improved while not causing extra modeling/computational burden. Two approaches are compared: (i) not considering the inventory costs at all and (ii) incorporating the inventory costs associated with onboard time and those related to transshipment by assuming a fixed connection time. The two models are compared with the ideal model capturing the exact inventory costs on a route choice problem and a capacity planning problem based on extensive randomly generated and practical numerical experiments. The results show that: first, ignoring the inventory costs in service planning models may lead to network design with much higher costs (poor network design decisions); second, in service planning models assuming weekly frequency, the inventory costs associated with onboard time could be formulated exactly, and those related to the connection time of weekly services could be approximated by assuming fixed connection time of 3.5 days for ports with 1 day’s minimum connection time and 4.5 days for ports with 2 days’ minimum connection time.     

组合型水泥粉煤灰碎石桩(CFG桩)复合地基在深厚软基处理中的应用

在深厚软土地基(fak≤100 kPa)上建造储罐等建筑物,承载力要求高、不均匀沉降变形要求严,若采用单一CFG桩复合地基加固,可能导致桩距过小或桩长太长,需要采用组合型复合地基,CFG桩+振冲碎石桩复合地基是组合型复合地基的一种。根据CFG桩+碎石桩组合型复合地基的加固机理,分析了其受力特性以及CFG桩和碎石桩的作用,研究表明CFG桩对提高地基承载力和减小沉降起控制作用。基于优化理论,建立了组合复合地基的优化设计方法。通过工程实例讨论了组合复合地基的优化设计方法,结果表明:复合地基的承载力、沉降量和经济效益均满足工程要求。     

油田注水管道的腐蚀研究与缓蚀剂评价

油田注水管线所输送介质复杂,腐蚀现象严重,存在安全隐患,一旦因腐蚀泄漏就会造成巨大的经济损失。因此,开展油田注水管道的腐蚀研究及采取措施减缓腐蚀具有重要意义。为此,对某油田注水管道现场采集注入水样及腐蚀产物,通过X-射线衍射及X-射线能谱仪进行分析,分析结果表明腐蚀产物主要是碳酸钙,同时含有一定量的氯化物、碳酸亚铁、硫化物等成分。通过电镜扫描腐蚀产物的微观形貌,发现存在氯离子腐蚀。并通过ICP-OES分析输送介质组分,针对其腐蚀特点及输送介质组分,采用失重法及电化学方法评价了引入季铵盐的咪唑啉缓蚀剂HJD2最佳质量分数及缓蚀机理,实验结果表明该缓蚀剂对该注水管道具有较好的缓蚀作用,在现场注水温度下,最佳质量分数(0.06%)时的缓蚀效率为95.1%,通过注入该缓蚀剂可以有效地减缓该注水管线的腐蚀,延长管线的使用寿命。     

高速船尾部喷水推进局部振动分析

针对高速船尾部采用喷水推进装置的局部振动问题,建立了船体尾部包含喷水推进泵的有限元模型。考虑附连水质量的影响,将船体尾部离散成甲板,底板,喷水推进泵,尾板等局部结构,采用规范经验公式估算以及有限元分析的方法分别对各局部结构的板、板格、板架进行固有频率计算,将其结果与轴频和叶频激励频率进行储备频率校核,判断尾部采用喷水推进装置在振动问题上是否满足规范标准,并为下一步的船体设计提供参考。     

导管螺旋桨水动力学性能的影响因素

为了获取导管螺旋桨水动力性能的主要影响因素,指导导管螺旋桨的优化设计,采用计算流体力学CFD对Ka4-7010+19A导管螺旋桨进行水动力性能研究,分析不同导管长度、导管攻角、螺旋桨纵倾角及多导管组对其水动力特性的影响。结果表明：减少导管长度将使推力系数及扭矩系数同时增大,而敞水效率下降;适当增加导管长度可以略微提高其敞水性能;减小导管攻角在一定进速范围内使推力系数和扭矩系数同时大幅度增加,增加导管攻角将导致推力系数和扭矩系数同时下降;当螺旋桨纵倾角保持在10°以内时,不会对敞水性能产生太大影响。对于多导管螺旋桨而言,前置、后置及不同附属导管直径大小都对敞水性能有很大影响,其中后置大导管组螺旋桨能明显降低螺旋桨扭矩系数,并且能在低进速范围内提升敞水效率。研究成果可支撑导管螺旋桨的优化设计。     

一种新型尾滑道式船载小艇收放系统可行性研究

作为一种新型的尾滑道式船载小艇收放系统,在回收小艇时,小艇需要以一定的航速冲上尾滑道。回收能否成功除了受制于驾驶员操作水平等主观因素,还与滑道的涉水深度、小艇与母船尾滑道的运动响应等客观条件有关。本文利用切片理论计算了小艇与母船尾滑道的运动响应,并对3级及4级海况下回收小艇的可行性进行了分析。     

应用于船舶压载水处理系统的自清洗过滤器技术

介绍了2种用于压载水处理系统的自清洗过滤器的工作原理和技术特点,并结合过滤器陆基试验的测试结果,对这2种自清洗过滤器在3种水质下的过滤效果和反冲洗效果进行分析和总结,结果可为压载水处理系统用的自清洗过滤器设计和选型提供一定参考。     

近岸深水联排灌注桩施工工艺优化

采用传统的冲孔灌注桩施工工艺进行海上灌注桩施工时,往往会面临适用条件限制、环境污染、施工成本增加等问题。针对三亚凤凰岛项目海上冲孔灌注桩施工特点,介绍通过优化钢平台结构形式及布局设计、泥浆循环系统优化设计、结构稳定性计算、"四新设备"创新应用等措施,有效降低施工成本、提高施工效率、减少环境污染、提高施工质量。结果表明采取的工艺优化和平台改进措施效果良好、实用性强。     

取水工程对港内水流条件及泥沙回淤的影响

针对取水工程对港池内水流及泥沙影响问题,以黄骅港综合港区港池取水工程为例,通过在分析工程区域自然条件和泥沙条件的基础上建立三维数学模型的方法,从潮流、泥沙角度分析各取水方案对港池内水流条件和泥沙回淤的影响。结果表明:取水工程实施后整个港池内流速均不大,除取水口外,流速均在0.1 m/s以下。取水工程不会造成周边水域泥沙场的改变,对进港航道及港池淤积影响不大。取水工程实施后在设计最大取水流量范围内不会影响港口的正常运行。