涵洞基坑降水方案比选与参数分析

结合哈大铁路客运专线DK651+972涵洞施工的实例,论述了根据实际水文地质条件确定降水方案,对以往经验参数进行修改,以达到降水目的及确保工程顺利进行。     

Unsteady finite-depth effects during resistance tests on a ship model in a towing tank

This paper covers an extension of the study of Doctors et al. (J Ship Res 52(4):263–273, 2008) on oscillations in wave resistance during the constant-velocity phase of a towing-tank resistance test on a ship model to the case of relatively shallow water. We demonstrate here that the unsteady effects are very prominent and that it is essentially impossible to achieve a steady-state resistance curve in a towing tank of typical proportions for a water-depth-to-model-length ratio of 0.25. This statement is particularly true in the speed region near a depth Froude number of unity. However, on the positive side, we show here that an application of unsteady linearized wave-resistance theory provides an excellent prediction of the measured total resistance, when one accounts for the form factor in the usual manner. Finally, a simple application of the results to the planning and analysis of towing-tank tests is presented.     

Water entry of a bow-flare ship section with roll angle

The two-dimensional water entry of a bow-flare ship section with constant roll angle, or heel angle, was studied by using a boundary element method. The fully nonlinear free surface conditions and exact body boundary conditions were satisfied. Nonviscous flow separation from the knuckles of the section or from the curved bottom could be simulated. The numerical calculations were compared with existing experimental results. First, the effects of roll angle were investigated and then the characteristics associated with large roll angles were examined in particular. The evolution of the free surfaces and the pressure distributions on the section surface are illustrated and the influence of nonviscous flow separation from the leeward section surface is discussed.     

深水试验水池大型升降平台多电机同步控制

深水试验水池是开展深海装备开发必不可少的试验手段,大型升降平台是其中的关键设备.大型高精度、高转速传动系统的多电机同步控制是最为核心的问题之一.同步控制算法的优劣直接影响系统的性能与可靠性.提出深水试验水池大型升降平台多电机同步协调控制系统构成方案,并提出一种新的基于拉力死区误差均衡及中心耦合误差的升降平台多电机同步协调控制策略,实现了拉力控制和位置控制的解耦;同时,提出了多电机控制的升降平台仿真系统,其仿真结果表明:所提出的控制策略同步稳定性能高、收敛速度快,具有很高的应用价值.     

海上溢油收集装置概念设计

随着海洋石油开采和运输事业的日益发展,海上溢油问题的研究越来越受到重视,具有重要的理论价值和实际意义.论文针对各类海上溢油事故,在现有技术的基础上进行突破和创新,提出了三套新概念的海上溢油处理装置,热气球海上浮油收集装置、海上铲车浮油收集器和下潜式浮油收集器,分别利用漩涡原理,面面接触的物理方式和生物环保技术,有效提高海上溢油的收集效率,丰富了溢油处理装置的设计理念,为后续的详细设计奠定了基础.     

超大型浮式生产储油轮货油舱脚手架设计新思路

脚手架是造船及建筑等行业必须应用的辅助工具之一.设计快速搭建和方便拆卸,且满足有关国际安全标准和行业安全规范的脚手架,是我国造船业缩短建造周期、降低建造成本的一项紧迫任务.文章以上海外高桥造船有限公司承接的渤海二期油田30万吨FPSO货油舱脚手架结构设计为例,设计了一种符合国际安全标准、快速搭建和方便拆卸的脚手架结构形式.     

船舶辅机直流调速系统失磁故障的分析及研究

分析了船舶辅机直流晶闸管调速系统各种控制方案失磁的原因,提出了解决失磁问题的方法,设计出了相关的检测电路,并给出了电路参数及调试时应注意的问题.     

高速电弧喷涂在船舶尾轴修复中的应用

以某推轮已磨损的左右尾轴轴颈修理为例,介绍了采用热喷涂技术修理尾轴时涂层制备方法及涂层材料的选择、涂层厚度的确定、热喷涂主要工艺过程及涂层加工等有关技术问题。该方法具有可靠、快速、经济的优点,可供修理船舶尾轴等轴类零件的维修人员参考。     

大型泥泵水密封装置试验台设计

设计制作试验台是为了对泥泵的主要部件“水密装置”在安装过程中进行质量控制,确保“水密装置”的安装能够符合设计要求。对设计过程的技术难点进行了分析,提出了对模拟轴的连接结构形式进行改进方案,消除了水封室水压对模拟轴的作用力,使整个试验台的转动要比原来的更平稳。