船体零部件标准化设计思路

为了提高造船效率、降低造船成本、提高造船质量,造船行业需要引入先进的智能制造理念。船舶制造作为典型的离散型制造行业,其传统的船舶设计、制造模式在一定程度上限制了智能制造技术的大范围推广应用,从船体零部件标准化设计角度,研究如何利用标准化设计手段来扩大船厂智能制造应用范围和场景。形成船体零部件标准化、批量化设计原则和标准,达到降低船舶智能制造技术难度,最终实现船舶制造向连续型生产模式转变的目的。     

桥梁深水钻孔灌注桩施工技术

随着大型跨海、跨江桥梁的相继建设,桥梁跨度越来越大,对基础的要求也越来越高,超长、大直径的钻孔灌注桩已被广泛应用于大型深水桥梁建设中。结合工程实例,介绍大型桥梁深水钻孔灌注桩施工技术及其施工过程中的关键控制要点。     

海上挤密砂桩工法及其在港珠澳大桥岛隧工程的应用

针对海上挤密砂桩这一新型软基加固工法,依托港珠澳大桥岛隧工程对其原理和特点进行介绍。总结现场挤密砂桩载荷板试验的相关成果,介绍了海上挤密砂桩应用在不同构筑物时的设计原理、计算方法以及布置方案。分析目前国内海上挤密砂桩的施工能力,归纳总结了海上挤密砂桩的施工效率和相应的质量控制管理措施。为此工法的推广及应用提供依据。     

Application of new parameterizations of gas transfer velocity and their impact on regional and global marine CO2 budgets

One of the dominant sources of uncertainty in the calculation of air–sea flux of carbon dioxide on a global scale originates from the various parameterizations of the gas transfer velocity, k, that are in use. Whilst it is undisputed that most of these parameterizations have shortcomings and neglect processes which influence air–sea gas exchange and do not scale with wind speed alone, there is no general agreement about their relative accuracy.The most widely used parameterizations are based on non-linear functions of wind speed and, to a lesser extent, on sea surface temperature and salinity. Processes such as surface film damping and whitecapping are known to have an effect on air–sea exchange. More recently published parameterizations use friction velocity, sea surface roughness, and significant wave height. These new parameters can account to some extent for processes such as film damping and whitecapping and could potentially explain the spread of wind-speed based transfer velocities published in the literature.We combine some of the principles of two recently published k parameterizations [Glover, D.M., Frew, N.M., McCue, S.J. and Bock, E.J., 2002. A multiyear time series of global gas transfer velocity from the TOPEX dual frequency, normalized radar backscatter algorithm. In: Donelan, M.A., Drennan, W.M., Saltzman, E.S., and Wanninkhof, R. (Eds.), Gas Transfer at Water Surfaces, Geophys. Monograph 127. AGU,Washington, DC, 325–331; Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] to calculate k as the sum of a linear function of total mean square slope of the sea surface and a wave breaking parameter. This separates contributions from direct and bubble-mediated gas transfer as suggested by Woolf [Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] and allows us to quantify contributions from these two processes independently.We then apply our parameterization to a monthly TOPEX altimeter gridded 1.5° × 1.5° data set and compare our results to transfer velocities calculated using the popular wind-based k parameterizations by Wanninkhof [Wanninkhof, R., 1992. Relationship between wind speed and gas exchange over the ocean. J. Geophys. Res., 97: 7373–7382.] and Wanninkhof and McGillis [Wanninkhof, R. and McGillis, W., 1999. A cubic relationship between air−sea CO2 exchange and wind speed. Geophys. Res. Lett., 26(13): 1889–1892]. We show that despite good agreement of the globally averaged transfer velocities, global and regional fluxes differ by up to 100%. These discrepancies are a result of different spatio-temporal distributions of the processes involved in the parameterizations of k, indicating the importance of wave field parameters and a need for further validation.     

不同发射参数下潜射鱼雷初始弹道建模与仿真

为研究潜射鱼雷发射参数设定对鱼雷初始弹道的影响,建立鱼雷初始弹道数学模型,对鱼雷在纵平面的初始弹道进行了研究,利用Simulink编程进行了仿真,得出在不同发射参数设定下弹道的袋深、最大超调量和到达设定深度所需时间.仿真结果表明,鱼雷横舵管制舵角和出管速度对鱼雷初始弹道都有影响,其中鱼雷横舵管制舵角影响较大,为进一步优...     

大连长兴岛北港区波浪条件数值模拟研究

利用国际通用的MM5风场模式和SWAN浪场模式,通过推算影响工程海域的台风和寒潮大风天气过程,得到工程海域-30 m等深线处不同重现期设计波要素,然后采用MIKE 21 NSW和BW波浪数学模型,对工程规划方案设计波要素和港内波况进行了计算。结果表明:工程受N向和NNE向风浪影响相对较大,外海波浪传播至防波堤处无明显衰减;设计高水位重现期50 a时防波堤处最大H1%约7.3 m;防波堤对港内围堰掩护较好,建成后港内波浪条件明显改善。     

钦州湾湾口填海对茅尾海水交换能力的影响

以溶解态的保守物质作为示踪剂,建立茅尾海水交换平面二维数学模型,采用开边界污染物浓度梯度与内侧一致假定考虑了边界污染物回归,计算分析了钦州湾湾口两侧大范围填海工程对茅尾海纳潮量和水体半交换周期的影响情况。研究表明：龙门海峡通道顺畅是维持茅尾海纳潮量的关键因素,湾口宽度保持9.4 km以上茅尾海内纳潮量和水体半交换周期基本不受湾口填海工程影响。     

3 000 t海上运架梁专用起重船结构设计

简要阐述了3 000 t海上运架梁专用起重船的结构设计难点以及通过以有限元计算解决常规设计所不能解决的难点。     

京杭运河的船闸设计研究

简要介绍京杭运河的建设情况,分析京杭运河船闸的总平面布置设计要点及船闸输水系统和主体机构的设计要点。     

宿迁市运河文化桥现状老桥护栏提升改造设计及应用

随着经济和社会的发展,城市道路的快速化改造工程越来越多。由于新建道路设计时速及标准均有提高,既有现状老桥的防撞护栏等级已经不能满足新建城市快速路标准的要求,需要对现有老桥防撞护栏进行提升改造。以宿迁市迎宾大道二期快速化改造工程为例,介绍了现状运河文化桥老桥防撞护栏的提升改造设计方案,并采用屈服线分析和强度设计理论及非弹性分析方法进行了计算分析。在实际工程应用中,取得了良好的效果,以期为类似的现状老桥护栏提升改造项目提供借鉴。