基于SIMULINK的岸边集装箱起重机减摇系统仿真

在岸边集装箱起重机起升机构和小车运行机构模型的基础上建立简化的单摆模型,通过对模型的受力分析建立非线性方程.同时在MATLAB的SIMUUNK环境下对此模型进行动态仿真,达到通过控制小车的驱动力来控制吊具的摆角的目的.     

Cycle commuting in Belgium: Spatial determinants and ‘re-cycling’ strategies

This paper attempts to explain the spatial variation of the use of a bicycle for commuting to work at the level of the 589 municipalities in Belgium. Regression techniques were used and special attention was paid to autocorrelation, heterogeneity and multicollinearity. Spatial lag models were used to correct for the presence of spatial dependence and a disaggregated modelling strategy was adopted for the northern and southern parts of the country. The results show that much of the inter-municipality variation in bicycle use is related to environmental aspects such as the relief, traffic volumes and cycling accidents. Town size, distance travelled and demographic aspects also have some effect. In addition, there are regional differences in the effects of the structural covariates on bicycle use: the impact of variables such as traffic volume and cycling accidents differs substantially between the north and the south of the country. This paper also suggests that high rates of bicycle use in one municipality stimulate cycling in neighbouring municipalities, and hence that a mass effect can be initiated, i.e. more cycle commuting encourages even more commuters in the area to cycle. These findings provide some recommendations for decision-makers wishing to promote a shift from car to bicycle use.     

大型小水线面双体船纵向运动稳定性及纵向运动分析

以大型小水线面双体船为研究对象,观察其在静水中的纵向运动稳定性以及根据STF方法结合粘性修正方法预报其在波浪上的纵摇、垂荡运动等。首先根据ROUTH稳定性准则从定性角度观察其稳定性,然后从定量角度进行分析,给出其稳定性运动品质评价指标,并与配置稳定鳍后进行对比。最后给出配置稳定鳍后小水线面双体船的纵向运动预报。     

高速铁路软土路基施工过程中整体稳定性分析

随着我国经济建设的不断发展以及运输系统要求的提高,大量高速铁路在我国广泛修建。然而,在软土区域修建高速铁路,路基施工过程中的整体稳定性一直备受关注。结合工程实例,借助有限元分析的方法,建立三维模型,对路基施工过程整体稳定性进行分析,研究方法及结论能为类似工程设计及施工提供参考依据。     

圆电极电磁流量计干标定模型及仿真

目前在电磁流量计的干标定研究中，为方便公式推导，通常将实际的圆电极简化为方电极模型．这种简化在电极尺寸较大时，会引入不必要的计算误差，影响流量计的标定精度．本文从圆电极模型出发，论述了其对应权重函数的计算过程．并针对大尺寸圆电极模型进行理想化计算，得到其点电极模型，并运用此模型进行了仿真研究．     

Design and evaluation of an integrated inventory and transportation system

This paper proposes the adoption of an integrated inventory and transportation system (IITS) to minimize the total costs of inventory and transportation. A non-linear programing is developed by analyzing transportation and inventory costs with one supplier and many retailers in the distribution environment. The paper compares the proposed model with the traditional approach in computing total costs with numerical data. The results indicate that the total costs can be optimized by adopting integrated programing rather than the traditional approach, along with achieving improved customer service levels. In particular, sensitivity analysis is applied to determine the performance of the IITS under various transportation costs, holding costs and shortage costs. It shows that the transportation cost per unit is most sensitive in the proposed model. In this situation, the IITS is more effective for cost saving when set-up cost, holding and shortage costs are high, but is less effective for situations involving high per-unit transportation costs.     

Privacy protection method for fine-grained urban traffic modeling using mobile sensors

With the ubiquitous nature of mobile sensing technologies, privacy issues are becoming increasingly important, and need to be carefully addressed. Data needs for transportation modeling and privacy protection should be deliberately balanced for different applications. This paper focuses on developing privacy mechanisms that would simultaneously satisfy privacy protection and data needs for fine-grained urban traffic modeling applications using mobile sensors. To accomplish this, a virtual trip lines (VTLs) zone-based system and related filtering approaches are developed. Traffic-knowledge-based adversary models are proposed and tested to evaluate the effectiveness of such a privacy protection system by making privacy attacks. The results show that in addition to ensuring an acceptable level of privacy, the released datasets from the privacy-enhancing system can also be applied to urban traffic modeling with satisfactory results. Albeit application-specific, such a “Privacy-by-Design” approach would hopefully shed some light on other transportation applications using mobile sensors.     

车辆加载情况下静荷载测试

对于桥梁静荷载试验,试验规范推荐的分级加载方法不能确保在分级加载过程中桥梁结构的多个控制截面同时是安全的。将所有加载车的加载位置比拟成一个广义的点,使得安全动态加载的问题转化成求解安全加载域边界的几何问题,从而很容易计算出安全加载路径。分析安全加载域的定义及计算。     

回声测深仪计量检定装置的研究

为研究浅水回声测深仪计量检定标准装置,以完成量值传递,文章介绍了2种不同的检定装置,可根据具体环境条件选择水槽比对方式和模拟器方式对回声测深仪进行检定,并对回声测深仪的基本原理、工作流程、2种检定装置的构造、测试结果和优缺点进行了简要的阐述。