Economic Valuation of Coastal and Marine Resources: Bohol Marine Triangle,Philippines

This article provides results on the net benefits generated from the natural resources in the Bohol Marine Triangle (BMT) in the Philippines. The BMT spans over 112,000 ha and its coastal ecosystems are rich in biodiversity and provide economic opportunities to the coastal communities. With a 10% discount rate, the accumulated total net benefits for the BMT resources over a 10-year period is US$11.54 million. Tourism and the municipal fisheries are the most important direct use values of the coastal and marine resources of the BMT accounting for 44% and 39% of the total net benefits. Annual revenues attributed to ecosystems were as follows: coral reefs, US$1.26 million; beach/intertidal area, US$1.12 million; marine waters, US$646,501; mangrove, US$239,561; and seagrass, US$105,990. The large market values indicate the dependence of the local community on the BMT coastal and marine resources. In the same way, non-market values show the important life-support functions of coastal and marine ecosystems. The net benefits reflect the magnitude of potential losses due to improper management of coastal and marine resources in the BMT. This valuation highlights the importance of the coastal services to the BMT economy and draws attention to the benefits the local stakeholders derive from BMT coastal resources. Policy measures can now take into account these values to justify a sufficient investment in coastal management efforts to sustain the flow of coastal services in the interest of current and future generations.     

喷油泵装配线中拧紧技术的研究及应用

本论文介绍了拧紧技术的原理和方法,以及拧紧技术在喷油泵装配线中的应用.最后说明了拧紧程序在喷油泵装配线中的程序防错方法.     

带回流线的全并联直供系统研究

根据带回流线的全并联直接供电系统的原理,推导出其电流分布及牵引网电压损失,并通过仿真验证了全并联对降低牵引网压损的有效性,同时从仿真结果定性地分析了全并联次数和全并联位置与牵引网电压损失的关系。     

Observer-based clutch disengagement control during gear shift process of automated manual transmission

A clutch disengagement strategy is proposed for the shift control of automated manual transmissions. The control strategy is based on a drive shaft torque observer. With the estimated drive shaft torque, the clutch can be disengaged as fast as possible without large driveline oscillations, which contributes to the reduction of total shift time and shift shock. The proposed control strategy is tested on a complete powertrain simulation model. It is verified that the system is robust to the variations of driving conditions, such as vehicle mass and road grade. It is also demonstrated that the revised system with switched gain can provide satisfactory performance even under large estimation error of the engine torque.     

温度对盐渍土抗剪强度和变形特性的影响

为了明确因冻结温度和结晶差异造成的温度对盐渍土抗剪强度和变形特性的影响，以高含盐量和不同盐分类型的盐渍土为研究对象开展试验研究。首先，选用青藏高原察尔汗-格尔木高速公路沿线采集的含盐量为10%~36%的氯盐含量高、硫酸盐含量低的盐渍土土样（HC-1，HC-2）和硫酸盐含量较高而氯盐含量较低的盐渍土土样（CS）3种高含盐量盐渍土作为试验土样，对3种土样进行冻结温度试验，验证其降温至-20℃时，土体不会发生冻结。其次，在5个不同控制温度（-20℃、-10℃、0℃、10℃和20℃）下，分别进行盐渍土直剪试验以得出温度与抗剪强度参数关系函数。最后，分析温度对抗剪强度和弹性模量的影响，同时，利用数值拟合建立考虑温度影响下的盐渍土抗剪强度和切线弹性模量公式。研究结果表明：当温度由20℃降低至-10℃，3种盐渍土的抗剪强度和初始切线弹性模量均增大后趋于峰值，而随温度继续降低至-20℃后，HC-1和HC-2土样指标呈下降趋势，CS土样各参数结果却趋于稳定；不同含盐类型的盐渍土，温度对其破坏比R_f的影响也不同；在温度由20℃降至-20℃的过程中，HC土样的R_f在-10℃出现峰值，且在较低荷载（100 kPa）下，呈现出先增大后减小的特点，在较高荷载（200，300，400 kPa）下呈现出先增大后趋缓的特点；CS土样的R_f在20℃~10℃、10℃~-10℃和-10℃~-20℃降温段呈现出先增大中趋缓后减小的分段式变化特点。     

Analysis on Ground Surface Deformation and Influence of Construction Parameters Caused by Two Different Shield Machines in Double-tube Tunnelling北大核心CSCD

Based on a shield-driven running tunnel project of Hangzhou Metro Line 2, this paper carries out field measuring of the ground surface deformation caused by two different shield machines in double-tube tunnelling in soft soil areas, obtains the laws of the surface deformation caused by shield-driven double-tube tunnelling and verifies the applicability of the modified Peck formula to double-tube tunnelling. The results show that in soft soil areas the impacts on ground surface deformation caused by different shield construction parameters in the previously and subsequently excavated tunnels are different, while the surface deformation changes sharply before and after the shield machine passing through the cutting face, and a rebound phenomenon occurs when the shield tail passes through the cutting face due to the influence of the grouting; The cutterhead torque of the shield machine in soft soil areas can be composed of five calculation factors, and the calculation results are in good agreement with the measured values. The larger the opening rate of the shield cutterhead is, the larger the average torque value will be, the higher the percentage of large ground loss rate will be, and the larger the maximum ground surface settlement will be; The ratio of cutterhead torque T to mucking volume per ring Q is used as the control parameter for analyzing the ground surface settlement, and a certain positive correlation between the ratio and the surface settlement value is determined, the smaller the cutterhead opening rate is, the more accurate the fitting results will be. © 2022, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

液力变矩器反求设计与内流场数值计算

采用反求设计方法建立了液力变矩器三维模型.建立了液力变矩器涡轮内流场物理数学模型,利用Fluent软件进行了相应的数值计算.分析了涡轮流道内流体速度、压力及压力损失情况,阐述了流场形成机理,为液力变矩器优化设计提供了理论依据.     

基于数字信号处理的直接转矩控制研究

直接转矩控制因控制简单、具有优良的动静态特性，在电机控制中应用越来越广泛。但它在低速区的局限也较多。随着数字信号处（Digital Signal Processing，缩写DSP）技术的发展，使得改善其低速控制特性成为可能。文中简介了直棼转矩控制技术的特点、控制原理及难点，探讨了一种应用DSP技术的直接转矩控制方法。     

基于PWM整流器的交流调速系统的仿真

将PWM整流技术引入交流调速系统。在PWM整流侧采用直接功率控制技术，实现交流侧的高功率因数；电机控制采用矢量控制技术，实现电机调速的高性能。通过Matlab／Simulink仿真，可以验证这种调速策略可以实现整个系统的功率因数接近于1，减少对电网的污染，并且可以保证电机有着优良的调速性能。     

The dynamic response of rail support

This research reviews principles behind the dynamic response of rail supports, and introduces a method of analysis to find the maximum response in a realistic setting. Assuming a time-dependent, moving mass with massive wheels is essential, because the ratio of the moving mass to the rail mass is significant. However, the dynamic response of the track is not affected by dynamic properties of the train other than its unsprung mass, because the natural frequencies of the train suspension and track are significantly different. A numerical method is developed to model the dynamic response based on these principles, and applied to the Korean urban transit. The dynamic response includes multiple peaks with a large amplitude range, creating noise while the wheel passes the support. The dynamic impact factor (DIF) for the rail support depends mainly on the stiffness and damping of the rail support. The DIF for the rail moment is below the code value, whether this value is based on numerical analysis or on-site measurements. However, our numerical analysis results in a DIF for support settlement that is greater than the code value, if the damping is less than 3%.