战时潜艇阵地分配优化模型的研究

战时潜艇阵地分配问题受战争随机因素的影响。从机会约束规划入手，结合整数规划和目标规划，建立战时潜艇阵地分配优化模型，体现战时潜艇阵地分配的特点．结合问题的特殊性，设计出潜艇阵地分配优化模型的遗传算法，为解决快速收敛打下基础，符合战时决策的要求。     

系统保证管理在成都地铁机电系统建设中的应用

系统保证管理在国外多个轨道交通项目中得到了成功应用。成都地铁立足于国内建设城市轨道交通项目的现状,结合自身实际,为更好地实现安全和效益的目标,在机电系统的建设过程中全面开展了系统保证管理。提出了系统保证管理的基本概念和主要工作内容;介绍了成都地铁1号线机电系统实施系统保证管理的工作进程。成都地铁1号线系统保证工作开展近2年来,取得了显著成果,为国内城市轨道交通行业引入系统保证管理、促进国内城市轨道交通行业发展起到了借鉴和推动作用。     

Reliability analysis of repairable systems using stochastic point processes

In order to analyze the failure data from repairable systems, the homogeneous Poisson process(HPP) is usually used. In general, HPP cannot be applied to analyze the entire life cycle of a complex, re-pairable system because the rate of occurrence of failures (ROCOF) of the system changes over time rather thanremains stable. However, from a practical point of view, it is always preferred to apply the simplest methodto address problems and to obtain useful practical results. Therefore, we attempted to use the HPP model toanalyze the failure data from real repairable systems. A graphic method and the Laplace test were also usedin the analysis. Results of numerical applications show that the HPP model may be a useful tool for the entirelife cycle of repairable systems.     

路段平均行程时间估计方法

为了有效利用线圈检测数据,精确估计路段平均行程时间,提出了一种路段平均行程时间估计方法。将路段平均行程时间分为平均行驶时间、平均排队时间和平均通过路口时间三部分。考虑线圈埋设的特点,通过估计平均行驶速度得到平均行驶时间。用分段时齐Poisson过程描述车辆驶入路段过程和驶离过程,用Markov排队模型描述车辆排队过程,用生灭过程描述排队车辆数,得到车辆排队模型,计算了路段有、无初始排队的平均排队时间。基于选取与路口相关的饱和流率和平均车长,计算了平均通过路口时间。计算结果表明:平均行程时间估计值与实测值的误差小于12%,说明路段平均行程时间估计方法可行。     

一致拥挤快速路交通系统稳定性分析

考虑快速路一致拥挤的前提下,通过选取适当的流一密关系式,建立快速路网络流模型。并在对快速路的第一段进行适当处理和考虑匝道排队的基础上,构造一个离散的线性系统。通过对此类型的离散系统进行稳定性分析,得到稳定的充分条件和最优控制器的设计方法,仿真实例表明该方法的有效性和实用性。     

Integrated evasive manoeuvre assist for collision mitigation with oncoming vehicles

Development and deployment of steering based collision avoidance systems are made difficult due to the complexity of dealing with oncoming vehicles during the evasive manoeuvre. A method to mitigate the collision risk with oncoming vehicles during such manoeuvres is presented in this work. A point mass analysis of such a scenario is first done to determine the importance of speed for mitigating the collision risk with the oncoming vehicle. A characteristic parameter was identified, which correlates well with the need to increase or decrease speed, in order to reduce the collision risk. This finding was then verified in experiments using a Volvo XC90 test vehicle. A closed-loop longitudinal acceleration controller for collision mitigation with oncoming vehicles is then presented. The longitudinal control is combined with yaw stability control using control allocation to form an integrated controller. Simulations in CarMaker using a validated XC90 vehicle model and the proposed controller showed consistent reductions in the collision risk with the oncoming vehicle.     

Distributed support modelling for vertical track dynamic analysis

The finite length nature of rail-pad supports is characterised by a Timoshenko beam element formulation over an elastic foundation, giving rise to the distributed support element. The new element is integrated into a vertical track model, which is solved in frequency and time domain. The developed formulation is obtained by solving the governing equations of a Timoshenko beam for this particular case. The interaction between sleeper and rail via the elastic connection is considered in an analytical, compact and efficient way. The modelling technique results in realistic amplitudes of the ‘pinned–pinned’ vibration mode and, additionally, it leads to a smooth evolution of the contact force temporal response and to reduced amplitudes of the rail vertical oscillation, as compared to the results from concentrated support models. Simulations are performed for both parametric and sinusoidal roughness excitation. The model of support proposed here is compared with a previous finite length model developed by other authors, coming to the conclusion that the proposed model gives accurate results at a reduced computational cost.     

Logistical restructuring and road freight traffic growth

The forecasting of road freight traffic has relied heavily on the close correlation between GDP and road tonne-kilometers. It has not been rooted in an understanding of the causes of freight traffic growth. The research reported in this paper has investigated this process of traffic growth in two ways: first, by analysing official data on the production, consumption and movement of food and drink products, and second, by conducting a survey of the changing freight transport requirements of 88 large British-based manufacturers.The analysis of secondary data shows how, in the food and drink sector, the relationship between the real value of output and road vehicle-kms hinges on four key parameters: value density, handling factor, average length of haul and consignment size. An attempt is made to explain variations in these parameters.The survey of manufacturers suggests that the growth of lorry traffic is the net result of a complex interaction between factors operating at four levels of logistical management: strategic planning of logistical systems, choice of suppliers and distributors, scheduling of product flow and the management of transport resources. Changes in the frequency and scheduling of freight deliveries in response to tightening customer service requirements and just-in-time management appear to have become a more prevalent cause of freight traffic growth than the physical restructuring of logistical systems. Manufacturers anticipate that their road freight demand will broadly increase in line with sales and be largely unaffected by road transport cost increases at the levels currently proposed. The paper concludes by examining their likely reactions to a much sharper increase in the cost of road freight movement.     

分布式量子通信网络中的身份认证方案

建立了量子身份认证模型,同时提出了一种基于四粒子GHZ态的量子相干性的身份认证方案。该方案可以应用在分布式量子通信网络中,并证明是无条件安全的。     

多语种驾驶人无纸化考试系统的设计与实现

介绍了一个基于Java Web和RMI技术的驾驶人学科无纸化考试系统的设计和实现方案。系统是针对一个城市存在多个无纸化考场的情况进行设计的，具有分布式的架构，在部署时可灵活地根据需要按集中式或分布式进行部署，系统又是一个具有多语种考试题库和考试界面，可方便地增加新的考试语种，适应了当前车管业务国际化的趋势。